Thanks for the video. I'm in the same situation as everyone else here. Several weeks (months?) of extreme heat down here in TX and the driver and passenger side front doors on my 2018 Charger have started doing this. Can't believe this video is 2 years old with so many people having this problem and Dodge still hasn't issued a recall.
This should be recalled just started happening to my 2018 charger passenger side thanks for the tips it's a freezing cold winter here at the moment Ill have to roll with it until it warms up a bit and I can fix it
Great video and instructions, as you can imagine I’m having the same issue, this helps a lot!! Did you do another clip to show the results, I looked and didn’t find anything, regardless, this helps a lot, thanks
Is this been holding up? i've seen alot of different videos addressing this using different glue methods, but most have not held up over the summer heat.
Yeah I had the same thang happen to my 19 Blacktop Charger! At first I thought somebody tried to slim Jim my door. But then I watched a couple RUclips videos that says the panels warp! So I took it to an interior shop and gave him $200 to fix it. He told me it took him less than an hour. He stapled the panel together somehow. And then used an epoxy over the staples to hide it. Smoothed it out and went over it with black spray paint for interiors.then re attached. Looks nuky
Thank you for this video. My car 2014 dodge charger has done it on both drivers front door & passenger. I was quoted $2,300 for new ones & they refused to repair. I wish you lived in my area to assist in KC Mo. Has your dash done this?
This has happened to my 2017 Chrysler 300. I have only put 18k miles and I have an extended warranty on my vehicle. The dealership I bought it from states this is considered "wear and tear" and it's not covered under my warranty. I just got off the phone with Chrysler Corp..they tell me there's been no recalls on this and they can't help me. My local Chrysler dealership states they won't re-glue the panels, but all 4 door panels need to be completely replaced at a cost of around $1,700.00. What a total rip off! This is definitely NOT wear and tear, it's shoddy product and shoddy workmanship from a company that doesn't give a crap. Shame on Chrysler and all the other companies who do not proudly stand behind their products!!
How can they say normal wear and tear? My 2016 300 has 42000 miles and most of the plastic has warped to some degree. I have got a 1994 SL500 with nothing similar this has happened.
same on my 2017, im in the process of repairing mine now. Its a known issue with chrysler and other mfgs. like Ford. Its not a safety issue, so they dont have to issues recalls. Its just ugly. Same as the touch screens delaminating, altho that could be considered saftey, it makes the touch screen go bonkers sometimes, causing a distraction.
@@spencerguignet1210 my 17 300 has screen delamination went to dealer and tried to explain this was a safety issue he looked at me like I was from mars, my doors coming unglued to. With the end of the hemi comes the end of me ever buying another chrysler
I used this video and some glue from harbor freight that looks just like that one but clear, also some plastic clamps to hold it down. So far its been a lil over a year and its still holding up
Got the same problem in my wife's 2015 Charger. I've got JB Weld high heat epoxy, supposed to be good to 550F,, it's what I'm used to. After 2 years,, How is your repair holding up?? Even used on ebay, those panels are running $300!!
I got the same problem with my 2016 charger RT rear passenger door, both panels against the console and now my dash pad is lifting! They definitely should recall this!
Even if Chrysler/Dodge replaced them at owner’s expense, are they just replacing with the same type of panels that will warp eventually anyway? This should be a recall. Crazy
I have a 2015 and this started happening to me thank to you I fixed it but I did use Gorilla glue seems to be good said it is high heat resistant so we'll see thank you again for the video..
for less wait time and stronger hold won't applying the glue than heavy duty staple allow for quicker re-assemble and usage of door instead of 1-day wait period?? But i like the epoxy idea aswell.....
Tbh this is every door panel since 2011 in chargers and Chrysler 300’s only i make those upper door panels every day and if they get a rolled edge or we have to peel them up for what ever reason we just super glue the edge down and leave it for 10 min we don’t even tape it or anything just glue it push it down and then it’s good
Happens with all chargers basically. When the door panels get too hot they warp its bs mines just did i... I'll prolly just try n stable it all thexway across someone said that worked for them
I have a 2018 300 and is doing the same thing just a think within three years kind of workmanship that we getting. I just refuse to pay them to do this it should be a recall I thought it was only me and I had so much respect for Dodge Chrysler product.I found out that they know it and continue to make cars with cheap material to the consumer but they won’t recall to fix them themselves.
@@williamperdew4746 I had to redo one door recently that gets the most sun throughout the day but the opposite side is holding up still. I just went to harbor freight yesterday and they still have the blue plastic little pry bar kit to pull the panels...that's what I used along with their glue and plastic clamps and it was a pretty easy job.
I was pissed when I called dodge. No way I'm investing in NEW door panels, they were on backorder. Stopped at an upholstery shop & they wanted 150 a door, just to dismantle & glue seam down. NOPE! Im going to attempt this myself but using clamps and let dry for 1 day.
This is totally a later generation issue. Fight y’all. DO NOT PUT UP WITH IT. FILE COMPLAINTS RAISE HELL! Read your warranties. Defects like that are COVERED.
I have this same issue with my 2017 Chrysler 300. Mine was leased and I went to the dealer and they said it would have been covered with the standard 3 year/36,000 miles. Unfortunately it didn’t start doing it until year 4 😡 both my passenger front and back door panels and my driver’s door is starting it now. So pissed
I bought a 2018 Chrysler 300 and both front doors are doing this and I keep mine in a garage. I'm so mad I'm ready to start raising hell. They want to charge me 3,030 dollars for 2 new door panels. That's not gonna happen.
My 2017 Daytona 392 has both passenger door panels warping and dodge will do nothing. Called consumer affairs and they said the same thing. Completely unacceptable. I work for Hyundai and we will repair literally anything if it’s under 5 year/60k miles. I know Hyundai has the best warranty but still I’ve heard of people going in at 20k miles and dodge won’t repair the warped door panels. Such a disappointment…
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
Thanks for the video. I'm in the same situation as everyone else here. Several weeks (months?) of extreme heat down here in TX and the driver and passenger side front doors on my 2018 Charger have started doing this. Can't believe this video is 2 years old with so many people having this problem and Dodge still hasn't issued a recall.
Happening to me 😒
Me too 😡🤬🤯
Legit just bought a 2018 charger and went the car wash once. 3/4 off my door panels are peeling off.
The song blessed me! God deserves the honor glory and blessings!
My 2016 Mercedes GLE 350 did the same thing, thanks for the video.
This should be recalled just started happening to my 2018 charger passenger side thanks for the tips it's a freezing cold winter here at the moment Ill have to roll with it until it warms up a bit and I can fix it
I'm in the same boat! Looks like hell too. Thank you for this video as mines also no longer under warranty.
Same exact thing happen to my 2017 Chrysler 300...thanks for this video...I was frustrated considering the low miles!
It happens because of the heat coming in through the windows
Great video and instructions, as you can imagine I’m having the same issue, this helps a lot!! Did you do another clip to show the results, I looked and didn’t find anything, regardless, this helps a lot, thanks
My 2018 Chrysler 300 has had both front doors do this 🤬 thanks for the video! Gonna try this this weekend. Wish me luck lol
@William Perdew yes used this method and it worked. With the exception of one tiny spot that I prob didn't put enough glue on
@@Beckyskattebo thanks for the reply , I'm going to need to do all four doors. Glad that it worked.
Yeah man my 14 charger started this bs after a couple hot days. Found this and I really appreciate you for it.
My 2018 just started doing this. Thanks for making this video!
Knite . Great video and thanks for taking the time and detail of the job. How did it go and is it holding up? Thanks again!
Is this been holding up? i've seen alot of different videos addressing this using different glue methods, but most have not held up over the summer heat.
Thank you so much for making this video. My wife’s car (2018 Dodge Charger) is having this exact problem.
Me too. Same year. Did you fix it?
Love the video! Save me a lot of money….but how long did it last? Is it still going strong? My 2018 charger is doing this 🤦🏽♀️🤦🏽♀️
My son's 2017 has the same issue. I was thinking of trying a heat gun to soften it and see if I can put it back.
Still have to bond it with something. Remove the weatherstrip first so you dont get glue on it like this video.
Yeah I had the same thang happen to my 19 Blacktop Charger! At first I thought somebody tried to slim Jim my door. But then I watched a couple RUclips videos that says the panels warp! So I took it to an interior shop and gave him $200 to fix it. He told me it took him less than an hour. He stapled the panel together somehow. And then used an epoxy over the staples to hide it. Smoothed it out and went over it with black spray paint for interiors.then re attached. Looks nuky
Good fix nice job.....my 2018 door panels are doing this....gota get it fixed....praise break 🙌🏽 🙏🏽
Thank you for this video. My car 2014 dodge charger has done it on both drivers front door & passenger. I was quoted $2,300 for new ones & they refused to repair. I wish you lived in my area to assist in KC Mo. Has your dash done this?
I was looking online to buy a new one, but now ima give this a try first. Thanks for the vid! 👍🏽
Thanks for the video. I have a GLS450 for my wife that is starting to do this as well. Quick question, did that epoxy end up working well for you?
Smart method, I'm excited to try. Thanks for the vid!
Did you fix it. Or did tha heat melt that glue? And did it peel back up ?
This has happened to my 2017 Chrysler 300. I have only put 18k miles and I have an extended warranty on my vehicle. The dealership I bought it from states this is considered "wear and tear" and it's not covered under my warranty. I just got off the phone with Chrysler Corp..they tell me there's been no recalls on this and they can't help me. My local Chrysler dealership states they won't re-glue the panels, but all 4 door panels need to be completely replaced at a cost of around $1,700.00. What a total rip off! This is definitely NOT wear and tear, it's shoddy product and shoddy workmanship from a company that doesn't give a crap. Shame on Chrysler and all the other companies who do not proudly stand behind their products!!
Started doing it on my 2016 300 a couple of years ago.
18,000 miles? You need to raise hell. That’s bullshit, not wear and tear. They are lying to you. Fight fight fight.
How can they say normal wear and tear? My 2016 300 has 42000 miles and most of the plastic has warped to some degree. I have got a 1994 SL500 with nothing similar this has happened.
same on my 2017, im in the process of repairing mine now. Its a known issue with chrysler and other mfgs. like Ford. Its not a safety issue, so they dont have to issues recalls. Its just ugly. Same as the touch screens delaminating, altho that could be considered saftey, it makes the touch screen go bonkers sometimes, causing a distraction.
@@spencerguignet1210 my 17 300 has screen delamination went to dealer and tried to explain this was a safety issue he looked at me like I was from mars, my doors coming unglued to. With the end of the hemi comes the end of me ever buying another chrysler
How did it turn out? I have the same issue with my 2017 300C?
Nice, how did it come out? I have the same issue on 2 of my charger door panels
I used this video and some glue from harbor freight that looks just like that one but clear, also some plastic clamps to hold it down. So far its been a lil over a year and its still holding up
@@Airon0727 what clamps did you get?
@@Sancheezy323 just some super basic plastic spring clamps like medium sized
I tried epoxy, hot glue and automotive double sided tape. Nothing worked. How did yours turn out?????
Got the same problem in my wife's 2015 Charger. I've got JB Weld high heat epoxy, supposed to be good to 550F,, it's what I'm used to. After 2 years,, How is your repair holding up?? Even used on ebay, those panels are running $300!!
How did your door panel repair come out
Thanks for the video I have that problem on my driver door. I'll be fixing that now thank you
I got the same problem with my 2016 charger RT rear passenger door, both panels against the console and now my dash pad is lifting! They definitely should recall this!
Same thing with my 2016 RT. Rear passenger door and panels to the left and right of the gear shifter.
Same problem with mine man
What about the 5 minute plastic apox
Great video and was just wondering how long it lasted
same here on the 2015 chrysler 300s. mainly the passenger side rear door but its happening to all doors alike
Thank you Lord for blessing me😇❣️ I also needed this video...Thank you!
Thanks for sharing this video. This is exactly what's going on with my 2016 RT. How did it turn out for you?
Good job! what would you do differently next time?
@knite. so is it holding up? I guess its been 1 month after the repair hopefully panel wrap is in tact.
Nice job man. Thx for sharing.
Thanks for the video, mine does the same thing. How did your turn out?
Even if Chrysler/Dodge replaced them at owner’s expense, are they just replacing with the same type of panels that will warp eventually anyway? This should be a recall. Crazy
Also nice video. I’m going to try your epoxy method
Thanks for the video. I ordered one for my front door now 0assenger door did same thing. I am going to fix it likevyours,. Thanks
I wonder if a heat gun first then the apoxie
I have a 2015 and this started happening to me thank to you I fixed it but I did use Gorilla glue seems to be good said it is high heat resistant so we'll see thank you again for the video..
What type of tape should I use to hold it together? Every type of tape I’ve tried just won’t stick to the panel:(
Go all the way around to the back of the tape. Should work
for less wait time and stronger hold won't applying the glue than heavy duty staple allow for quicker re-assemble and usage of door instead of 1-day wait period?? But i like the epoxy idea aswell.....
How did this turn out?
Same identical problem. Got the runaround too.
Did it hold up?
I just want to know, did it work...??
How is it holding up for you now?🙏🏾
Tbh this is every door panel since 2011 in chargers and Chrysler 300’s only i make those upper door panels every day and if they get a rolled edge or we have to peel them up for what ever reason we just super glue the edge down and leave it for 10 min we don’t even tape it or anything just glue it push it down and then it’s good
Are you using gel or the thin Super Glue?
How good has it held up?
Hey brother same thing is going on with my wife's 2018 charger. How has it held up so far?
Ayyy I hear that gospel music playin 🙏🏼🙏🏼🙏🏼
My 300s is doing this where are you located?
Can you do this without taking the door panel off?
I was wondering the same thing.
I’m having the same problem; where are you located
Unbelievable that dodge won’t recall this
Yea, no. I'm calling you! The same issue just happened to me, man. Can it be glued with the door still on🤣? This should have been a RECALL frfr.
Happens with all chargers basically. When the door panels get too hot they warp its bs mines just did i... I'll prolly just try n stable it all thexway across someone said that worked for them
pro tip: you can watch series on flixzone. Been using them for watching all kinds of movies recently.
@Coen Brodie yup, I have been using flixzone} for months myself :D
@Coen Brodie definitely, have been using flixzone} for since november myself :D
@Coen Brodie Yea, I've been using Flixzone} for years myself :D
I'm in Kentucky I have a 2017 and my doors driver and passenger side is coming up..please help me
Can you do mine? I have a 2016 dodge charger. I’m In Texas.
K nite where are you located
I have a 2018 300 and is doing the same thing just a think within three years kind of workmanship that we getting. I just refuse to pay them to do this it should be a recall I thought it was only me and I had so much respect for Dodge Chrysler product.I found out that they know it and continue to make cars with cheap material to the consumer but they won’t recall to fix them themselves.
Time to write the NHTSA and complain and make them recall it.
Thanks for the fix and praise byeak
Just did this. How is it holding up for you?
I used some glue from harbor freight that looks just like that one but clear, its been a lil over a year and its still holding up
@@Airon0727 is it still holding up? I need to do mine too
@@williamperdew4746 I had to redo one door recently that gets the most sun throughout the day but the opposite side is holding up still. I just went to harbor freight yesterday and they still have the blue plastic little pry bar kit to pull the panels...that's what I used along with their glue and plastic clamps and it was a pretty easy job.
Did it work?
My 300 2016 Chrysler also has four warp door panels there should be a recall I looked up and see slot of people having this problem!
Where are u located?
Did any of this work
Are your panels still intact?
What’s the update?
🎶for all that you done for me.🎶🎶
I was pissed when I called dodge. No way I'm investing in NEW door panels, they were on backorder. Stopped at an upholstery shop & they wanted 150 a door, just to dismantle & glue seam down. NOPE! Im going to attempt this myself but using clamps and let dry for 1 day.
Good video, thank you.
Wish we had seen the outcome.. for all we know it fell apart as soon as he removed the tape.. wasted my time!
I have that same problem on all my doors
Nice work!
The same problem is going on with my 2017 Chrysler 300c 😔
Tbh I tried it, didn’t work that well unfortunately. Thanks for the advice though!
Thank you. Mine is doing the same thing
My 2015 panels are warped also,
300s with the same issue.
My 2014 did the same thing
Like everyone else my 2018 Dodge Charger did the same thing on both front doors. Smh.
What exactly warped? The plastic is totally fine.. its the rest that is pealing off of it.. nothing is WARPED at all...
Thank you.
This is totally a later generation issue. Fight y’all. DO NOT PUT UP WITH IT. FILE COMPLAINTS RAISE HELL! Read your warranties. Defects like that are COVERED.
I have this same issue with my 2017 Chrysler 300. Mine was leased and I went to the dealer and they said it would have been covered with the standard 3 year/36,000 miles. Unfortunately it didn’t start doing it until year 4 😡 both my passenger front and back door panels and my driver’s door is starting it now. So pissed
I bought a 2018 Chrysler 300 and both front doors are doing this and I keep mine in a garage. I'm so mad I'm ready to start raising hell. They want to charge me 3,030 dollars for 2 new door panels. That's not gonna happen.
Where are you at I'd love to have you repair mine.
I fixed the problem by getting deep tint on the windows.
My 2020 is stating to do this on my passenger side!
I have the same problem in my 2018 dodge Charger rt
I have a 2016 charger that's doing exactly this and it's been driving me insane
can you do this for me
💪💗
That just happened to My 2018 Gt
My 2017 Daytona 392 has both passenger door panels warping and dodge will do nothing. Called consumer affairs and they said the same thing. Completely unacceptable. I work for Hyundai and we will repair literally anything if it’s under 5 year/60k miles. I know Hyundai has the best warranty but still I’ve heard of people going in at 20k miles and dodge won’t repair the warped door panels. Such a disappointment…
Chrysler 300 with the same issue.
Buttons here in kokomo indiana wanted to charge me 1200$ to fix
online 150 dollars you check it
it really pisses me off as my passenger side panel already started to warp...some shitty material used by dodge
Anybody in NY doing this im lazy