X-Man Tornado V3 vs MoYu Weilong V9 BATTLE
HTML-код
- Опубликовано: 29 фев 2024
- Battle to find the best cube!
Consider checking them out:
Tornado V3 - speedcubing.org/products/x-ma...
WRM V9 - speedcubing.org/products/moyu...
Music:
-Free Music for Videos 👉 Music by Illect Recordings - Pocketierre - thmatc.co/?l=E02400D7
- California Dreamin by Dust Diggers
( • california dreamin' 🎥 ... )
I have the Tornado v3 pioneer and so far its pretty great. Its essentially a combination of the feeling that you get from moyu's rs3m v5 and a gan cube like the 11m pro or Icarry S, which makes it great imo.
Though just like the statements you've made to the tv3, I feel like it can be uncontrollable at times, especially when, for some reason, I cannot turn the cube probably. I have yet to try the wrm v9 and if I were to buy one which one should I get?
@@JaysonPL If you have the money, the 20-magnet ball core is the best. The ball-core is also great, and if you're on a budget the standard is still a really good cube (avoid the maglev though, it's not worth the extra price). 20-magnet ball core is definitely the best out of them though
Yeah I agree. The Tornado can be slightly uncontrollable but it's still a great cube. And I also think that the 20 magnet ball core is the best WRM V9!
@@UK_Cuberthe other big downside of the v3 are the magnets. It can sometimes get pushed inside the corner piece and we would need to take the plastic off. It is annoying and something we need to be careful at while doing. I messed up a lot and made the corner piece very loose when I tried to put it back and it made me have to use glue. But it is till a very good cube nonetheless, and probably even better than the gan 14.
have a question my tornado pionner id blocky when i spam algs is yours blocky too
Always enjoy your videos as how premium it looks and how you demonstrate everything simply.. 😁
Will be waiting for your next video..😅
Thank you, shouldn’t be waiting too long!
Great video, you are definetelly underrated ! I would like to know the differences between the v9 bc, and the v9 20 mag version.
Thank you so much! I only have the 20-magnet ball core variant so I don't know about the differences.
Excellent video! Tornado v3 is still my main, even though I had to super glue the corner to core magnets in place. I wonder if the Wielong V9 has had any build quality issues?
Thank you! So far I have not had any issues with the build quality but I also haven't had an issues with the Tornado build quality. I only found out about the issue on the V3 after so many people mentioned it in one of my recent videos.
Well i have been experiencing issues with my v9 se where the piece magnets (not core mags) makes this annoying clicky sound which i have to go to the trouble of finding the clicky piece and super gluing the magnets in place and this issue usually happens when i drop the cube or just plain old aggressive solving and slamming it on a stack mat
I've had one of my corner to core piece magnets fall out
I have bought a V3 pioneer, but accidentally I didn't buy the UV version. Should I return it and wait for a new one or is the lack of UV not such an issue?
I have the uv one and it’s really nice to look at. I would recommend you to buy the uv one as it is just a few dollars more expensive.
This is such a well made video!
Thank you so much!
where is the wrm v10 video
wrm v9 vs wrm v10
Your thumbnail gets better and better! What app do you use to make your video thumbnail?
And the reason why im asking these questions is because i wanna make my own videos.
I use photoshop but I used to use a website called ‘Photopea’ which is essentially a free version of photoshop with most of the same features.
@@UK_Cuber thank you!
One more thing
People have been saying that the cubes durability and build quality of the tv3 is bad
Is it true?
Yeah, personally I haven’t been having this issue but a lot of others have been saying it breaks pretty quickly.
Will we get shipping charges from that store you suggested?
It's just £2.85 for anyone within the UK!
@@UK_Cuberi would love to shop there but i live in asia💀
Hey, about that catching of the tornado that you speak, I also had it. The thing is that, (if it is the flagship or pioner version), one of corner magnets, the ones related to the core, may have come off, resulting in that wierd catching. To solve it you just have to open the cube, find the detached magnet, that propably is attached to one core magnet, and stick it with glue to the corner missing it. Hope it helped.
I will definitely try that and see if it works! Will reply to this comment once I have done it.
They all seem slightly wobbly but none more than any other!
Got a MoYu RS3M V5 BallCore UV yesterday, Recently my tornado v3m's core quite literally broke (not even kidding) i was in the middle lf a solve, that was my only magnetic cube and main i owned, im very pissed that this cube barely lasted less than an year. Anyways hope this new moyu lasts longer as ive heard no quality issues with this. Could you make a video on the rs3m v5 bc uv setup bychance? thanks a lot! new subscriber
That's sad to hear. Lot's of people are having issues with the Tornado's build quality. I don't actually own the V5 at the moment so I can't do that yet. Maybe if I get that cube in the future I will! Thanks for subscribing!
The RS3M V5 BC Is GREAT. I got it before my Tornado V3 came in and i used the V5 A lot and i can say to you that the V5 doesnt have any Quality issues.
@@frostdacube8173yep its running great rn
@@UK_Cuber👍
Both great cubes and I'm not surprised that the battle was so close. I mained the Tornado V3 for a while but switched to the V9 Special Edition when it came out (not a big fan of maglev and prefer springs). I personally don't think the tensioning system from MoYu is a big downside, I'm very used to it and it's simple.
Yeah I can see what your saying. I sort of forgot that most people don’t change tensions that much but I still think that it is somewhat important. I also do like the simplicity but a screw??? In 2024??? Cmon MoYu!
Have you tried de-magleving the wrm v9?
I haven't tried that just because of how bad I am at things like that! Somehow I would mess it up
nice vid! You should do another cube battle like this with the super v2 ball core
Thank you! I do want to do more videos like this in the future!
I have the tv3 pioneer and wrm v9 ballcore, on loosest setting tv3 still could barely do 45 degrees so thats why I mained wrm v9
That’s fair enough!
Can you make your f2l algorithm that mostly you use?
Maybe, but I think that as someone who averages around 15 seconds, it would be so much better to get it from a faster cuber!
We just have to wait for Qiyi to release their V4.
Would be interesting if that could challenge these two!
I have both of these cubes aswell and did over 2000 solves with each of them. I personally like the v9 a bit more but i mained both of these cubes and perform almost the same on it. I also prefer the feeling of the v3 and just sometimes can‘t turn as rough as on the v9. Hope i could help a bit (sorry for my bad/not perfect english)
Both of the cubes where lubed
Nice vid btw!
Yeah some good information there!
For me the Tornado Pioneer V3 wins by a fraction because of its overall performance, control and feel even though I have had the same problem with 2 of them. One of the magnets & spring coming off a probably because of week plastic around it catching and breaking. The V9 is very close though, a bit less controllable at times but a great cube. The V5 is also great cube for the price and seems a bit more controllable than the V9. It's not quite as good in other areas but may suit some better. There's something to suit everyone and plenty of choices 👍
Yeah definitely. Even for me it's really close between these two cubes and either one of them could be better than the other dependent on your preferences. I haven't tried the V5 yet but a lot of people are saying it's really good so that might have to be the next cube I try!
@@UK_Cuber Yep. You should also check out the DaYan GuHong Pro M (Maglev) sometime. I got the 56mm version and after set up it turns really well, it has a bouncy feel and is smooth turning. It doesn't feel as premium but it's another well performing priced cube 👍
i think the tensioning system isn't really that important. i usually just change it once or twice and then never think about it again. i really don't mind that the wrm v9 has the old moyu adjustment system with the screw. in fact, i actually like the fact that it has a screw because you can get it to the exact tightness that you want to, not limited to just 5 settings. (also, you can unscrew an entire side to look at the internals lol) it wasn't that hard for me to get even tensions on the cube. it only took me one or two minutes to get the tensions right. just stretch the edges as hard as you can and make sure they are equidistant from the center.
about popping, i've popped probably around 2 or 3 times on the tv3 over 7000 solves, but i've never had a single pop on the wrm v9 over 2000 solves. i think this is probably because the feet of the edge pieces of the wrm v9 have extra protrusions, which makes it so that the corners must also be spread apart to get the edge out of the cube.
i also think that the point that you made that the tv3 was much better ootb and required less setup, i also disagree. when i tried my wrm v9 ootb, i actually enjoyed it dry with stock tensions more than my fully set up tv3. but it's probably just my preference since i like very fast cubes, and the tv3 with the yoo setup was extremely sluggish for me (relative to the wrm v9, of course. i felt like i didn't know the definition of speed before i tried it).
That makes sense. I understand where you are coming from with the tensioning system especially considering how infrequently you will actually adjust them. But I just find it so much nicer to not have to worry about each side being different and I will sacrifice only having 5 settings in order to not have a screw!
It's interesting that you've experienced pops on the TV3 as this is something I haven't had yet. But it makes sense about the feet on the edge pieces.
You must really like fast cubes for the V9 to be better out of the box! For me it was wayyyy to uncontrollable but I guess that's just preference.
(Thanks for taking the time to engage with my content, I really appreciate it!)
Looks like I have finally found you a better cube!
Yeah, it's petty good!
People say its the special edition version of the weilong v9 which is the best...
Maybe, having only tried one version, I am probably not the best to comment on this but if others say it is then it likely is worth trying.
Today i got my Weillong V9 20 Magnet Version. I had the Special Edition before and I can say i dont like the 20 Magnet Version at all. Its kind of loose and wobbly but you get stuck with it. So yes its absolutly worth trying the Special Edition if you wanna beat the V3.
@@UK_Cuber
Eventhough we lost jperm we still have UK cuber
Haha, not quite comparable but I'll take it!
The way you compared them is very creative!
Thank you!
I've got the Moyu Ballcore Magic Clothes WR M v9 and the Tornado v3 Pioneer UV and they are both amazing cubes that feel awesome and perform amazing.
However, I think neither is as good as the GAN 12 Maglev UV.
I'd put the Moyu v9, the Tornado v3 and the GAN 13 on the same par and as good as each other, but the GAN 12 is just in a league of its own!
That's an interesting opinion because for me, I completely disagree! I think that the GAN 12 is very good but personally I prefer the stability on the Tornado V3 and WRM V9 to a point where they are better to solve. I can understand where you are coming from though as the GAN 12 used to be my main and I did really like using it!
@@UK_Cuber It was a shock to me also because there was a time when I would only use Moyu cubes.
I think it's just a size thing mostly.
As the Moyu cubes tend to be just over 54mm (Speedcudereview always tests them with digital measuring tools and they are usually 54.4mm) and the GANs are always 56mm.
I think if Moyu (or QiYi X-Man) made a cube like the v9 or v3 and made it 56mm, I'd switch back right away.
That makes complete sense now! I understand why you made the switch because I also think they need to be a little bit bigger.
Im still gonna stick with tornado v3 i dont like wrm v9 because its screw , i hate the screw i have a screw cube and the red one is the smoothest while the blue is hard its so hard to balance and i dont have any lube which is realy difficult
personally i like the standard ballcore v9 the best(plus i think you forgot to mention the v9 ballcore picube se)
That’s interesting! What makes you favour that version? And yeah I didn’t realise that version was a thing 😂
@@UK_Cuber lol, i think the 20 mag ballcore's magnets feel different, most people actually like the 20 mag ballcore magnets as they feel more natural but something about the original v9's magnetic pull just gives it stability
and yea the picube se v9 was my friends main before he switched to the 20 mag ballcore
That makes sense. I haven't tried the standard ball-core version so I don't know about the feeling but I can understand why you would prefer it!
@@UK_Cuber yep, i dont think its a popular opinion though
as a proud user of wrm v9 i agree
Haha, it's a really good cube to be fair!
I have to own up to my mistakes here, I badly deteriorated my v3 once (could hear a very audible pop when it happened) and an edge piece came off almost completely, bent caps and all, Now I was sure it couldnt have been only the edge that suffered damages, but the cube seemed to be moving well so i didnt pay it any mind. 8 MONTHS LATER center piece breaks off, theres no way its because of other damages, cause none took place as severe as that time. For that cube to hold on to its dear life 8 months after the event is proof of incredible quality, couldnt ask for anything else
That’s mental. How did it last that long?!? Lots of people have been mentioning the build quality issue though. So it’s definitely a slight issue for the Tornado (despite holding on for 8 months!)
@@UK_Cuber well im 100% sure it wouldve lasted 1 or 2 more years if the damaging wouldnt have occured, maybe even more.
The edge piece that was affected was very visibly dented, broken binding pieces etc, so its no doubt that through contact the center piece was affected too, its true the damage mightve not been as severe, but it was nevertheless devastating when It exploded into pieces mid solve...
Bro I just bought the tv3 2 days ago ☹️
But this video is insane Ty bro
The Tornado is still such an incredible cube and I really like it (just 2 weeks ago I made a video about why it was the best cube ever made!). And thank you!
Lol the tv3 also has edge magnets wdym
He ment edge magnets as in magnets on the feet which attract to the core which the tv3 doesn't have
... Performance better on the moyu?
The tv3 literally has players with world records...
You probably didnt set up your cubr properly
I feel like the wrm v9 is too expensive for what it is.
That's understandable. It does seem like flagship price for a cube with a screw is a bit ridiculous!
@@UK_Cuber yea and I think they should update what they give instead of the base stuff. A cube Pouch and everything should be mandatory for anything above $20 now!
The v5 uv bc is also better than the tv3
Interesting, is that something I should try next?
@@UK_Cuber yeah its pretty crunchy, the v5 is the only cube that I average sub 10 consistently on and got my sub 6 pb single on. It reminds me of like a valk but lighter (feel), and sounds like a combination of the wrm v9 and rs3m super.
gan 12 is still one of the best cubes
Yeah, it's pretty decent. I just find both of these a lot nicer to turn.
fix your fingertricks bro💀
They not that bad, right!?!
@@UK_Cuberyeah, in fact they are amazing
Moyo gets judged for too much in their box then not enough lol!
Haha, is it too much to ask for a cube bag?!?
@@UK_Cuber idk id rather not pay extra and just get the cube
The thing here is that the fact the his Turning is not accurate
That is definitely something that I need to improve!
wsp
Hi!
Sorry but your turning is bad because of which you get wired catches
Yeah, maybe