well done .some retailers recommend that the coating should bond for 24hrs or more before getting contact with water.but you washed immediately hope this won't affect the job
Hi there, Thank you, I haven’t used since then those brands of ceramic coatings. But it’s important for the application, condition, sterile surface, right temperature etc. Thank you for watching my video.
Fantastic xml ceramic coating At a small dose of graphene, you forgot to mention it! 😉. It is supposed to last 6 months, I see more + 1 year !. Have a good review! 👍
Hi Nico! Thank you for the comment! Yes it’s true I did forget to mention that but my thoughts were that a product with graphene supposed be be a bit more pricey!!😉😉 So I didn’t believe at first! Please support my channel if you want by subscribing or liking the video! That would be a great help! Many thanks Alan Dqdetails
@@alangligor Yes there should not be a lot of graphene, because in a pipette the liquid is quite clear !, but compared to CQuartz lite it is still a little darker !, so surely a small percentage of graphene! .. In any case it is very resistant to chemicals and heat, for example by passing a heat gun on fantastic xml ceramic coating graphene and on carpro CQuartz lite. Well, fantastic doesn't move, but CQUARTZ lite goes from beading to sheeting! By cons I would have appreciated a little more round pearl (110-120 °) a bit like CQuartz lite !. The hydrophobic effect of graphene ceramic coating and nice but not as pronounced as lite!
Hi Nico! Funny you say that Actually I’ve tested some ceramic coatings from PYRAMIDCARCARE specifically the pro one great stuff! I’ll post the video this weekend! Thank you for your thoughts and support! Many thanks Alan Dqdetails
awesome video 👍... talking about ceramic coating is there any ceramic coatings out there you can do out side as if you havent got a unit or garage ect under a gazebo?
Hi Gareth! Thank you buddy for watching my video and subscribing to my channel!! 🙏 Well if is in the shade not in direct sunlight and no wind…. Garage therapy ceramic coatings, gtechniq liquid crystal, because these coatings are easy to apply but I still would recommend in a unit. Because that ceramic coating needs to cure for a least 12 hours. The bonding between the ceramic coating and the clear coat of your car has to be “ not disturbed “ basically!! Thank you again! If you have more questions please ask! 💪🤛
very informative video tq. wondering if a cheap ceramic coating is okay to be used for a car that mainly parks outside. i dont have a garage, and the weather is constantly hot here. will it be okay or does it do more harm than good?
Hi Irfan ! How are you? Well a cheap ceramic coating is better then sealant or a wax so if you want to apply this to your car is worth it. Obviously if is very hot where you live is better to take your time prepare your car properly and then leave it to cure for 15-24 hours. Well if you definitely want a ceramic coating make sure you making the effort ( if you can ) to prepare your paintwork properly! Thank you for taking the time to watch my video! 👍💪
@@alangligorHello.. Im fine tq. Yeah i am planning to diy colour correcting my car. And polish to get it somewhat cleaner. Been wondering if i should ceramic coating or just keep waxing every 1-2 weeks. Its a daily so washing will be quite frequent. You're welcome. Subbed.
Hello again! Thank you for subscribing!!👍👍 Well Irfan go for gtechniq light serum or cquartz 3.0 . These 2 ceramic coatings will protect you from swirls and light scratches... I think if you go to that extent of decontamination wash and a paint correction plus machine polish plus ipa plus all that time and effort.. I will Use a better quality ceramic coating’, this is just my opinion. It is up to you , thank you for your support! 👍💪👍💪👍
Hi there speed king thank you! No will not “ chip off” it will last about a year definitely! But only if the surface is properly decon and kept in a unit after application for at least 24 hours…. If you can…😉
Nice video. But it took until the end before i really viewed the left side. The ceiling of your garage gave it a matte impression during the whole video.
Good job, not sure I'd have the patience for ceramic coatings but it was very interesting to watch. More importantly, is that an E-type under there?! 😂👍🏼
@@alangligor It was the wheels that caught my attention... But yeah, I thought "it's either an E-type or a good replica lol" that bonnet length is quite distinguishable! Very nice, are you the lucky owner?
Sparklean Autos I wish!!!!! That is actually my favourite classic car v12 though.. that one from the video in-line 6 cylinder only... It’s actually my landlords toy!! I’m renting the unit from him!
I'm sure if you were to leave it for 1-2 weeks Nano Age/Bond would be far superior better than the XML Coating. (I get that it was a quick video 2 years ago)
Hi there Sorry for the late reply! In normal conditions you would not leave a ceramic coating 1 or 2 weeks to cure. I’ve used and tested loads of ceramic coatings , these 2 products were one of the cheapest nearly 2 years ago.I’ve tested these ceramic products/video to see the reaction /durability etc after applying them. Gtechniq/cquartz/titanium etc are strong ceramic coatings and over 50£ from retailers. Hence the video! Well thank you for your comment and the fact you took the time to watch my video. All the best! 🤙
@@alangligor yeah all good, I was just mentioning as I think they harden around 1-2 weeks before they can get wet. (Nano Age/Bond also won in a durability test despite a video of comparing loads of different expensive coatings 2 year test)
@@alangligor Thanks for letting me know. If thats all then i'll be giving this one a pass and going for one that gives 3+ years with the amount of work that has to be done prior to putting it on.
Hi there Kras, A bottle of 30 ml will last you for one coat on a big suv VW atlas I will use 50 ml bottle for 2 coats , and make sure you leave a minimum of 1 hour between coats! I hope this answerers your question! All the best! 👍💪
Hi there !! Yes you can but won’t last long, clear coat spray is better after polishing the headlights. But they are ceramic coating for glass. Depends on your head light, plastic or glass. Thank you
Well to be honest as the video shows with those tests I’ve done they are worth the money but time will tell how long they last .. Plus from my experience they don’t compare with gtechniq or drexler and Titan and sonax profiline!! I call them the budget ceramics coatings!!😉😉
Hi Andrew! Yes I made a mistake ! English is not my first language and after I posted the video I’ve noticed as well.. I don’t know why I said that! Well noted! Thank you for watching my video! 👍💪
Hi there! How are you? Well Avalon king is one of my favourite ceramic coatings, well if everything is properly prepared and leave to cure for over 24 hours ish.. it is one of the best!! 10 out 10! Price is there also the hardness 👌🏻👌🏻
I’m sorry to hear that! Well if is regarding your health.. I can wish to you all the health!! The rest you can do it on your own! Life is to short make the most of it. So my motto! Life is a bitch and it fu ]#,?€ when you don’t expect it.😉
Hi there! I think roughly.. about a year… and if applied properly. It will last longer if it has a decontamination wash 3 times in a year , plus use as a topper a ceramic sealant or a ceramic wax! Like all the ceramic coatings!!👍💪 I hope it helps!
Hi there! Thank you for the comment! Anxious-Ivory If you check my RUclips channel in couple of weeks I will post a video with some ceramic coatings that are suitable for you . And you don’t need a garage just good weather! If you want to support the channel please subscribe!
I was doubting if the fantastic xml was a fake ceramic coating until i watched this video, thanks mate
No problem! Thank you for watching my video!
Brilliant Video Alan showing that you don’t need to spend a fortune on Ceramics but prep work is still the key 🔑🙌🏻😍😍😍😍
Thank you very much Paul!!
Coming from you it means a lot!!
Thank you!👍💪
well done .some retailers recommend that the coating should bond for 24hrs or more before getting contact with water.but you washed immediately hope this won't affect the job
You should never wax your car before applying. Surface needs to be clear of any wax or cleaners. Great Video
Thank you!👍
Nice review 👌🏼 have you used either since and anything to note! I’ll be doing a video of correcting my bm and I’ll drop you a mention!
Hi there,
Thank you, I haven’t used since then those brands of ceramic coatings. But it’s important for the application, condition, sterile surface, right temperature etc.
Thank you for watching my video.
Good job .both work fine
The spray type is easier and faster to apply.any difference between the spray and the two you've just used
Fantastic xml ceramic coating At a small dose of graphene, you forgot to mention it! 😉. It is supposed to last 6 months, I see more + 1 year !. Have a good review! 👍
Hi Nico!
Thank you for the comment!
Yes it’s true I did forget to mention that but my thoughts were that a product with graphene supposed be be a bit more pricey!!😉😉
So I didn’t believe at first!
Please support my channel if you want by subscribing or liking the video!
That would be a great help!
Many thanks
Alan
Dqdetails
@@alangligor Yes there should not be a lot of graphene, because in a pipette the liquid is quite clear !, but compared to CQuartz lite it is still a little darker !, so surely a small percentage of graphene! .. In any case it is very resistant to chemicals and heat, for example by passing a heat gun on fantastic xml ceramic coating graphene and on carpro CQuartz lite. Well, fantastic doesn't move, but CQUARTZ lite goes from beading to sheeting!
By cons I would have appreciated a little more round pearl (110-120 °) a bit like CQuartz lite !. The hydrophobic effect of graphene ceramic coating and nice but not as pronounced as lite!
Hi Nico!
Funny you say that Actually I’ve tested some ceramic coatings from PYRAMIDCARCARE specifically the pro one great stuff!
I’ll post the video this weekend!
Thank you for your thoughts and support!
Many thanks
Alan
Dqdetails
Cheers mate this was the comparison I was looking for 👍
No problem!
Thank you for watching my video!
Much appreciated!
awesome video 👍... talking about ceramic coating is there any ceramic coatings out there you can do out side as if you havent got a unit or garage ect under a gazebo?
Hi Gareth!
Thank you buddy for watching my video and subscribing to my channel!! 🙏
Well if is in the shade not in direct sunlight and no wind…. Garage therapy ceramic coatings,
gtechniq liquid crystal, because these coatings are easy to apply but I still would recommend in a unit.
Because that ceramic coating needs to cure for a least 12 hours.
The bonding between the ceramic coating and the clear coat of your car has to be “ not disturbed “ basically!!
Thank you again!
If you have more questions please ask!
💪🤛
@@alangligor thank you for your reply il keep that in mind mate ... im looking forward to more video's in furture 👍
Nice mate !! Good job 👍🏻
Thank you Jose that is very kind of you!!!
I appreciate the support!!
👍💪
very informative video tq. wondering if a cheap ceramic coating is okay to be used for a car that mainly parks outside. i dont have a garage, and the weather is constantly hot here. will it be okay or does it do more harm than good?
Hi Irfan !
How are you?
Well a cheap ceramic coating is better then sealant or a wax so if you want to apply this to your car is worth it.
Obviously if is very hot where you live is better to take your time prepare your car properly and then leave it to cure for 15-24 hours.
Well if you definitely want a ceramic coating make sure you making the effort ( if you can ) to prepare your paintwork properly!
Thank you for taking the time to watch my video!
👍💪
@@alangligorHello.. Im fine tq. Yeah i am planning to diy colour correcting my car. And polish to get it somewhat cleaner. Been wondering if i should ceramic coating or just keep waxing every 1-2 weeks. Its a daily so washing will be quite frequent. You're welcome. Subbed.
Hello again!
Thank you for subscribing!!👍👍
Well Irfan go for gtechniq light serum or cquartz 3.0 . These 2 ceramic coatings will protect you from swirls and light scratches...
I think if you go to that extent of decontamination wash and a paint correction plus machine polish plus ipa plus all that time and effort.. I will
Use a better quality ceramic coating’, this is just my opinion.
It is up to you , thank you for your support!
👍💪👍💪👍
Hello alan, i really liked your video, please can you tell me will the fantastic x ceramic coating chip off after some months or not?
Hi there speed king thank you!
No will not “ chip off” it will last about a year definitely!
But only if the surface is properly decon and kept in a unit after application for at least 24 hours…. If you can…😉
@@alangligor thank you so much brother i got you😍
Nice video. But it took until the end before i really viewed the left side. The ceiling of your garage gave it a matte impression during the whole video.
Thank you for watching my video!🙏🤛
Well special effects!🤣
Thank you 😊
Good job, not sure I'd have the patience for ceramic coatings but it was very interesting to watch.
More importantly, is that an E-type under there?! 😂👍🏼
Thank you buddy
Yes indeed it’s e type 1968
You know your cars
@@alangligor It was the wheels that caught my attention... But yeah, I thought "it's either an E-type or a good replica lol" that bonnet length is quite distinguishable!
Very nice, are you the lucky owner?
Sparklean Autos I wish!!!!!
That is actually my favourite classic car v12 though.. that one from the video in-line 6 cylinder only...
It’s actually my landlords toy!!
I’m renting the unit from him!
@@alangligor Maybe he'll let you detail it in a future video 👍🏼🤞🏼🤞🏼
I'm sure if you were to leave it for 1-2 weeks Nano Age/Bond would be far superior better than the XML Coating. (I get that it was a quick video 2 years ago)
Hi there
Sorry for the late reply!
In normal conditions you would not leave a ceramic coating 1 or 2 weeks to cure.
I’ve used and tested loads of ceramic coatings , these 2 products were one of the cheapest nearly 2 years ago.I’ve tested these ceramic products/video to see the reaction /durability etc after applying them.
Gtechniq/cquartz/titanium etc are strong ceramic coatings and over 50£ from retailers.
Hence the video!
Well thank you for your comment and the fact you took the time to watch my video.
All the best!
🤙
@@alangligor yeah all good, I was just mentioning as I think they harden around 1-2 weeks before they can get wet. (Nano Age/Bond also won in a durability test despite a video of comparing loads of different expensive coatings 2 year test)
@@k.skyl1n3zz they fully bond within 12hours, only thing that takes weeks to cure is fresh car paint as the solvents need to vent out of the paint.
How long did the fantastic xml last. Am thinking of getting it and trying it but not if it only lasts for a week or something like that
Hi there!
If properly applied etc
6 to 8 months….
@@alangligor Thanks for letting me know. If thats all then i'll be giving this one a pass and going for one that gives 3+ years with the amount of work that has to be done prior to putting it on.
Good Video mate, will be interesting to see how long they last once the car is outdoors and being used.
Yep buddy true true...
Thank you for the support!!
Can we tjis product inside in kur car.
👏🏻👍🏻
Ciao puoi darmi un feedback dopo 3 anni? Che prodotto consigli oggi, che sia buono ed economico
Gtechniq !
🤙
Delle due un video puoi scrivermi il nome della migliore x te 👍
how much will a bottle last me? recently got a VW Atlas and I want to know if one will be enough
Hi there Kras,
A bottle of 30 ml will last you for one coat on a big suv VW atlas I will use 50 ml bottle for 2 coats , and make sure you leave a minimum of 1 hour between coats!
I hope this answerers your question!
All the best!
👍💪
@@alangligor amazing, thanks a lot!
No problem and thank you for watching my video and for your comment!
👍💪
Most people who buy these less expensive ceramic coatings don’t a have a garage. So gotta apply it outside. 😢
Hi there!
Thank you for watching my video 🤝
can you use it on the headlights?
Hi there !!
Yes you can but won’t last long, clear coat spray is better after polishing the headlights.
But they are ceramic coating for glass.
Depends on your head light, plastic or glass.
Thank you
Interesting.. do you think its equally good as the more expensive ones?
Well to be honest as the video shows with those tests I’ve done they are worth the money but time will tell how long they last ..
Plus from my experience they don’t compare with gtechniq or drexler and Titan and sonax profiline!!
I call them the budget ceramics coatings!!😉😉
Good video!
Nice one
I'm pretty sure 9H stands for the level of hardness and not the hours.
Hi Andrew!
Yes I made a mistake !
English is not my first language and after I posted the video I’ve noticed as well..
I don’t know why I said that!
Well noted!
Thank you for watching my video!
👍💪
Very true but even that is a gimmic. 9h is a diamond. There is nothing harder. They just created a scale based on like a pencil
What are your thoughts on Avalon kings coating?
Hi there!
How are you?
Well Avalon king is one of my favourite ceramic coatings, well if everything is properly prepared and leave to cure for over 24 hours ish.. it is one of the best!!
10 out 10!
Price is there also the hardness 👌🏻👌🏻
@@alangligor Meh not well but thanks for asking. That's great to know though. One day and weather permitting I'll have to try it
I’m sorry to hear that!
Well if is regarding your health.. I can wish to you all the health!!
The rest you can do it on your own!
Life is to short make the most of it.
So my motto!
Life is a bitch and it fu ]#,?€ when you don’t expect it.😉
@@alangligor any cheaper alternatives to Avalon king? It’s good but around £60
Hi Al!
Garage therapy Cerberus !
👌🏻
Good video!!
What is the duration of the fantastic xml?
Hi there!
I think roughly.. about a year… and if applied properly. It will last longer if it has a decontamination wash 3 times in a year , plus use as a topper a ceramic sealant or a ceramic wax! Like all the ceramic coatings!!👍💪
I hope it helps!
Hey bro good vid but a mill has 25 microns
If only my cars were nice enough for a ceramic coating!
I don't have a garage so I guess these are a waste of time
Hi there!
Thank you for the comment!
Anxious-Ivory
If you check my RUclips channel in couple of weeks I will post a video with some ceramic coatings that are suitable for you .
And you don’t need a garage just good weather!
If you want to support the channel please subscribe!