LG Washer Drain Pump Replacement AHA75853803
HTML-код
- Опубликовано: 29 мар 2022
- Buy part AHA75853803 now: repairclinic.com/PartDetail/4...
This video provides step-by-step repair instructions for replacing the drain pump in an LG washer (Model WM4000HBA). The most common reason for replacing this part is if it's missing or broken.
Learn how to troubleshoot your washer:
www.repairclinic.com/RepairHe...
This replacement video is applicable to the following brands:
LG
Connect With Us!
plus.google.com/+repairclinic
/ repairclinic
/ repairclinic
/ repairclinic
Don't forget to like and comment on this video and subscribe to our channel! 
Хобби
you fail to mention you have to raise washer to unclip pump.....
You don't, actually. It releases from inside the machine but the catch is hard to see behind the pump from above . They show the bottom view to give you an idea of the location so that you you know where to press the release by feel.
I can't thank these guys enough for posting this. Performed this same repair in an hour and it went flawlessly. I know a few folks here mentioned it's easier if you lay the washer on its side, but if it's on a pedestal and you don't have help to lift it down, this method let's you repair it in place and was just what I needed. Plus there are a lot of electrical components that will get soaked if you're not absolutely sure all the water is out when you tip the machine.
If you're doing this repair because of a possible clog, don't forget to check all three legs of the bellows hose...i found a lot of buildup in there because a deteriorating floor mat was washed (don't ask) and if i hadn't removed and flushed it out, the pump would have just immediately clogged again.
Thanks again RepairClinic. Saved me a bundle.
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
I use this to , replace the pump in my washer dryer combination. Because they're so cheap. It only lasted a year so I'm back doing it again so here I am reusing the same video and I appreciate it. It worked great for me the first time.
Wow
Instead of using the three screw holes at the bottom of the pump LG decided to make you take half the machine apart
Great...
Fortunately, I was able to remove our pump by tipping the machine on its side (make sure it won't slip) and use a 5/16" ratchet to remove the bolts from underneath it
I have a 2018 model WM4370HKA and my pump assembly didn't have the clip on the bottom that had to be released, thankfully. I have the washer attached to the small under drawer washer unit, so I couldn't tip mine back to release the small white clip. Mine had 3 hex head bolts that had to be removed, similar in the video where they pointed out 2 screws to be removed and then release the white clip on the bottom. I had 3 bolts then the entire assembly with drain pump and recirc pump came out.
Crystal clear tutorial. Thank you.
Super detailed ... even I could do the job with this guidance. Thanks!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
This is great. Thank you! I like that it is simple and step by step. I appreciate it. I did though have to raise the washer. My model is a washer/dryer combo though.
Thank you for this great help video saved me a 1k replacing my washer
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thank you
Thank you that worked. With a different model.
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
One of d best video
This video walked me through everything I needed and our washer is running great again, thank you!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Thank you for video it’s really helped me
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
@@repairclinic will do it
Great video and helped so much but just a word of advice, be sure to buy OEM parts, I just had to replace my new pump again after only 3 months because I bought a cheap replacement part......don't be cheap when buying the new parts?
We sell genuine OEM replacement parts at RepairClinic.com.
What is the purpose of two pumps on this machine? Or is there 2 options for the same component?
This case if ur washer machine just replace w/ new part, in actually maybe we must remove trapped water
Why not just lay the washer on its side and remove the bottom panel to access the pump? Seems like a lot less work. Thanks.
If the washer is not draining because the drain pump is clogged or failing and not all the water is manually removed, some water may spill. If there is no water remaining in the washer, laying it on its side is another option.
Yup I laid it on its side and that was way easier to get it out.
@@repairclinicwhat wow who cares about some water on the floor. throw an old towel down. i have to replace my pump again and im turning it on its side this time
@@ThePorkchopExpress975
How can you possibly be disrespectful when someone goes out of their way to help with an issue you have.
Nice
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Any other options if you don’t have the spring release tool?
Butter knife lol
Go get one at Harbor Freight or Tool King. They're 15 dollars out the door at most.. Think of how much are you saving.
I can attest to this. Takes two people to finagle that thing if you don’t have the tool. Save yourself time and heartache as long as the tool is cheap enough
Hi I ordered a drain pump assembly but it only came with one motor on the left side and not the right.
Im6 thanks
I replaced my pump. It still won’t drain. What’s next?
that sucks
This is superb clear steps. What a great video thanks.
why they put free flying znatit ads in this video?!
Good info big dawg
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!