Great video, Peter. Finally I learnt how to loosen, replace and tighten the drive belt on my car. To the people saying it's too long: stop rushing yourself. The walk-through is a detailed, calm explanation of what to do, how to access it and what purpose each part serves. This isn't a job that's going to be thoroughly explained in a three minute RUclips video.
Very informative video. Your system is the same as mine so I watched enough of it to find out where the bolts were and how to loosen and tighten them up. Decided I could replace my alternator drive belt rather than paying a mechanic $300 to replace it. Took less than half an hour due to none of the bolts being too tight to loosen and being able to get to all of them from above. BTW, my old belt was so degraded it has separated into 5 shoe lace size sections with the top of the belt completely worn away. Gotta love the 1998 toyota.
Dear Peter,Thank you for this tutorial.. I find it most useful to change the Drive Belt on my Toyota 1994.. Indeed very helpful to show the engine number! Your style of teaching is quite impressive!
Never did much DYI work on my car other than change out the struts, oil changes, and some exchanging of power steeling fluid and brake fluid. Just basic stuff. This video was helpful. My neighbor who is a toyota mechanic says there is a special tool made just for loosening the belt on my 99 Corolla. There is a weird bolt that needs to come off ; and the representative at the Toyota parts dept told me they do not sell the tool to customers and it can only be bought by a service person at Snap-On. I'd like to change this belt ASAP.
Thank You very much Mr. Finn, I have Learned A Lot From You Keep up the good work. Please guide me how to replace the timing belt on this Toyota Corolla. Years 1991 to 2000 Thank you.
Many thanks for this video, it is carefully shot and very precise in explaining the task. It was particularly helpful to me in tightening my serpentine belt. Thank you very much for taking the time and doing such a great job in putting this video up. cheers, Allen N
First of all thanks for all of your tutorials. They are very easy to follow. Do you have any tutorials on how to replace the power steering drive belt. I don't know how to loosen the pulley. Thanks again.
Hey Peter. thanks for the video, helped me replace my V belt and the VP/WP belt. Also I was wondering if the website shown is for mechanics or if you could possibly share that? It looks very useful! Thanks again
Access to the two bolts on my Corolla is blocked by what I think is the AC compressor. As a result, it's going to make for a tight squeeze as I can't see either bolt (from either the top or bottom.)
Hello everyone who can help. I have a 96 Corolla 1.8, the alt belt snapped last night and I replaced it after replacing I started the car and immediate squealing followed by the belt getting extremely hot. all the pulleys are moving and the belt isn’t too tight, I have no idea what could cause this. Also the belt is routed the correct way… double checked with a diagram. If anybody could help would be awesome!!!!
Anyone with a 1995 Toyota Corolla DX 1.8L 4-Speed like me, see this thread for your AC belt: www.toyotanation.com/forum/130-7th-generation-1993-1997/1395138-1995-dx-1-8l-serpentine-belt-confusion.html#post11651674
Great video, Peter. Finally I learnt how to loosen, replace and tighten the drive belt on my car. To the people saying it's too long: stop rushing yourself. The walk-through is a detailed, calm explanation of what to do, how to access it and what purpose each part serves. This isn't a job that's going to be thoroughly explained in a three minute RUclips video.
Thanks Sir. 👍
Very informative video. Your system is the same as mine so I watched enough of it to find out where the bolts were and how to loosen and tighten them up. Decided I could replace my alternator drive belt rather than paying a mechanic $300 to replace it. Took less than half an hour due to none of the bolts being too tight to loosen and being able to get to all of them from above. BTW, my old belt was so degraded it has separated into 5 shoe lace size sections with the top of the belt completely worn away. Gotta love the 1998 toyota.
Good comment, thanks 👍
Dear Peter,Thank you for this tutorial.. I find it most useful to change the Drive Belt on my Toyota 1994.. Indeed very helpful to show the engine number! Your style of teaching is quite impressive!
+navin sungum Thank You, :-)
Never did much DYI work on my car other than change out the struts, oil changes, and some exchanging of power steeling fluid and brake fluid. Just basic stuff. This video was helpful. My neighbor who is a toyota mechanic says there is a special tool made just for loosening the belt on my 99 Corolla. There is a weird bolt that needs to come off ; and the representative at the Toyota parts dept told me they do not sell the tool to customers and it can only be bought by a service person at Snap-On.
I'd like to change this belt ASAP.
Many thanks and do more work with your car!
Apparently, my car requires a 19mm female bit torx socket to take off the drive belt. Thank you for your video.@@PeterFinnTheCarDoctor
This is the first video I’ve found that properly showed me, thanks
Great, me too
Thank You very much Mr. Finn, I have Learned A Lot From You
Keep up the good work. Please guide me how to replace the timing belt on this Toyota Corolla. Years 1991 to 2000
Thank you.
Adnan Choudri Yes, I will. Thanks for comment.
Time to invest in a Milwaukee 12V Ratchet. I love mine and would help cut the time of this job in half.
Thank you Peter, with your instructions it was an easy change! My old '93 Corolla lives another day :)
Yes, good idea. :-)
Many thanks for this video, it is carefully shot and very precise in explaining the task.
It was particularly helpful to me in tightening my serpentine belt.
Thank you very much for taking the time and doing such a great job in putting this video up.
cheers,
Allen N
Thank You too and You are welcome. :-)
Greeting from Ohio. I drive the ‘94 Corolla DX
Do you know where the AC idler pulley is? Mine is making a whirring noise and needs to be replaced
Hi Peter i can't lift my car, do you think if i removed that windshield water tub i could access it better from the top..?
MAybe
First of all thanks for all of your tutorials. They are very easy to follow. Do you have any tutorials on how to replace the power steering drive belt. I don't know how to loosen the pulley. Thanks again.
ruclips.net/video/ytra5fYusK0/видео.html
Hey Peter. thanks for the video, helped me replace my V belt and the VP/WP belt. Also I was wondering if the website shown is for mechanics or if you could possibly share that? It looks very useful! Thanks again
Thanks for feedback. :-)
Nice video, I learnt how to do it man, which is the parts web site? looks great, I need to know to purchase some stuff
Thanks 👍
This was a great instructional video. Thanks.
Thank You for Your comment. :-)
Thanks a Lot men
Noted 👍
Thanks peter ,was a great help to me also on my 2000 1.8 here in oz, cheers
Great !
What website did you use in this video to find the parts?
I want to know as well
Thanks my friend but there's right hand rule to find direction of losing the Balt
You are Welcome. :-)
Thanks. Very useful. Greetings from Wroclaw.
Do these cars not have belt tensioner‘s?
Thanks for comment 👍
Hi Peter, if my mechanic is doing my timing belt, would it save me money by having him do my other belts at the same time? (they are all worn).
+Michael Cacioppo Yes, they save money. :-)
Rallienglanti mutta kiitos, itella on samanlainen
Noted
How do you loosen the Power Steering belt and the AC compressor belt?
Hello Pedro una consulta que aceite lleba el Corolla carburado. Del 96 japonés
I have read your post. Thank you for the message. Good comment. 👍😀
Olisiko sinulla jotain ohjeita miten vaihtaa 97 Corollaan kytkin?
ruclips.net/video/-b-xQ0WGPLw/видео.html
You use 100 fragments of words for a 3 word sentence.
Hello peter. I have 1996 Corolla. I can't find crankshaft position sensor, and you don't have video for it..
You don't have this
Access to the two bolts on my Corolla is blocked by what I think is the AC compressor. As a result, it's going to make for a tight squeeze as I can't see either bolt (from either the top or bottom.)
Hello 😃, I have read your comment and I appreciate it. Thanks. 👍
Nice video. Just talk less please and do more
Peter, don't you just losen the tension pulley with a long bar then pull the belt off?
Yes
Neat! What is the website at around 29:00?
I want to know as well
Thankyou!
Welcome!
Too much explanation and slow.
Noted 👍😊
hi peter. i need to replace my drive belt on my 1996 Corolla. it is a 4E-FE engine. is it the same way to do it? :))
Yes, same idea.
Such a long video for a simple replacement. Its essentially two bolts and somehow it took an hour to explain.
Hi and Thanks for Feedback. :-)
praise our LORD 🩸 thank you for being our savior jesus Christ 🛐PRAISE OUR LORD 🔜☮️ THANK YOU JESUS CHRIST FOR BEING OUR SAVIOR
Thank You 😃
Good video
Thanks! :-)
Hello everyone who can help. I have a 96 Corolla 1.8, the alt belt snapped last night and I replaced it after replacing I started the car and immediate squealing followed by the belt getting extremely hot. all the pulleys are moving and the belt isn’t too tight, I have no idea what could cause this. Also the belt is routed the correct way… double checked with a diagram. If anybody could help would be awesome!!!!
Noted 👍😀
Make ur videos less than 15 min. Tx
Hi, I need to do new video. :-)
@PeterFinnTheCarDoctor yes you do lol. It's extremely long
Thank you,
Hello, Thanks for comment. :-)
thank you for your video very useful (y)
can you share 28:05 that part Website for us？
It is Toyota dealership sales view
oh i see thank you
Do you have actual site address
WWW.
Anyone with a 1995 Toyota Corolla DX 1.8L 4-Speed like me, see this thread for your AC belt:
www.toyotanation.com/forum/130-7th-generation-1993-1997/1395138-1995-dx-1-8l-serpentine-belt-confusion.html#post11651674
Thanks for info.
Yay
Good comment. 😀👍