How To Make A Flying Drone | DIY Arduino Drone | Indian LifeHacker
HTML-код
- Опубликовано: 4 окт 2024
- Check out this easy tutorial on How To Make A Drone using Arduino. Hope you guys enjoy the video. Do not forget to Like, Share & Comment on the video.
Arduino Code: drive.google.c...
Buy Stuff Here :
Motor: buy.flyrobo.in/...
ESC: buy.flyrobo.in/esc
Props : buy.flyrobo.in/...
Frame : buy.flyrobo.in/...
Receiver & Transmitter : buy.flyrobo.in/...
Arduino Uno : buy.flyrobo.in/uno
MPU6050 : buy.flyrobo.in/...
____________________________________________________
Suggested battery and charger:
Limbos 11.1V 3S Li-ion Battery (approx. 15-20 minutes flight time) : www.flyrobo.in...
iMAX B6-AC : www.flyrobo.in...
Low quality and low price charger: www.flyrobo.in...
Follow Indian LifeHacker on:
Facebook : / indianlifehacker
Twitter : / hackerindian
Website : indianlifehacker.blogspot.com
______________________________________________________
Arduino code source credit:
Joop Brokking
/ macpuffdog
music Credit :
Song: Elektronomia - Sky High [NCS Release]
Music provided by NoCopyrightSounds.
Video Link: • Elektronomia - Sky Hig...
Download Link: NCS.lnk.to/Sky...
![Eminem - Temporary (feat. Skylar Grey) [Official Music Video]](http://i.ytimg.com/vi/ZaK9Wi5ho0o/mqdefault.jpg)
Arduino Code goo.gl/Axt9b8
Buy Stuff Here :
Motor: buy.flyrobo.in/1000kv
ESC: buy.flyrobo.in/esc
Props : buy.flyrobo.in/1045
Frame : buy.flyrobo.in/f450
Receiver & Transmitter : buy.flyrobo.in/fsi6
Arduino Uno : buy.flyrobo.in/uno
MPU6050 : buy.flyrobo.in/mpu6050
Halo
Indian LifeHacker
Sir that pdf is asking for document password what is ur password.
Kitne rupees me ban jata h ye
What about the battery
Center positions stored.
Digital input 08 = 1508
Digital input 09 = 1508
Digital input 10 = 1004
Digital input 11 = 1512
Move the throttle stick to full throttle and back to center
Throttle is connected to digital input 10
Channel inverted = yes
Move the roll stick to simulate left wing up and back to center
Roll is connected to digital input 10
Channel inverted = yes
Move the pitch stick to simulate nose up and back to center
Pitch is connected to digital input 10
Channel inverted = yes
Move the yaw stick to simulate nose right and back to center
Yaw is connected to digital input 10
Channel inverted = yes
The way you showed the failures is jst awesome. It is quite motivating
Excellent. I see you've tried a lot of time! Could you share the adjustment you did every time you tried and crash ?
yes , can you sir?
This is the work of Joop Brooking!
You didn’t give him any credit!
Dislike and report such videos as spam or misleading, please!
What is Joop brooking?
@@vinayakk2745 Probably the developer of the software I would guess.
@@vinayakk2745 search on RUclips, he is the creator of YMFC quadcopters.. He created this code, and not this guy.
@@prashantmishra2179 ohhok, thanks
I saw this video a year ago....now I came through it again....and this time I made it and it works.
Was it hard?
Worth it?
Do i need to try flying it several times to make it fly stable or should i make some edits in programming?!
Why was it crashing that many times?and what changes did you made for stabilizing it?
after every trial what changes do you make
fine tune the PID gains in the last source code till you get a stable flight
VANSH SHARMA sss
ntg at last flight he removed aruduino n replaced it with flight controller thts y he got a stable flight..his channel name gives an idea abt him..hackers...
hi bro, the flight controller code have not exist please bro ineed this code and thanks for all explanation.
Excellent. The code is similar to multiwii. Putting it all together and making it fly is definitely commendable.
Sir can i get the link code
you stole joop brokking's code and calling it your own....you are fake bro...you should thank him for that in your videos
complete agreed
Joop shouldnt have made it so easy with version 2 of ymfc. Now anyone can just plug and play, and steal the credit. "Indian LifeHacker Flight Controller". Trash. Thats the only line of code you changed? Your whole video should be one link. A link to the legendary youtube channel - Joop Brokking.
Stephan Flumm i agree with you....you know what he's guy who made to write my own quad for my quad and i did write my code ...he's like a teacher to me
Agreeing in 100% guys.
That's so anoying when someone steals other's tons of work and give the credits to himself. You don't even show YOUR viewers how to tune PID, probably you don't even know how to do it :P
Not okay in any way
kubalol m. yeah i guess he don't even know what is pid😊
Bro I am from Bangladesh 🇧🇩,,,,plz tell me how was your coast to make this???
I wanna make a flower dropping drone so pls suggest best nd durable configuration for drone....
u need a brushless motor and woodel ply picces
Put props at 5-10° angle for adictional stability, try adding gps and ATTI modules for wind stability
This sounds a lot like the designing of dihedral into wings on fixed wing aircraft for stability there
I also made the same one... Using Joop Brooking's YMFC AL sketch... but its really hard to control the quadcopter.....because it drifts a lot....
did u find any solutions to it ?
@@bluesmoke3543 Did u?
yes i am making quadcopter is very ustable ,how can i stable my quadcopter
Why is it that every RUclips video from India has insane EDM music?
Probably to avoid copyright strikes.
On top of the music credited, you must credit joop brokking for the code you took from, that's the least you can do !!!
Amin Hamdi he did in the description
I'm confused!
What exactly is calibration. I mean, why it's done? And, how is your drone steady in the air?? How to calculate that motor speed in which if all 4 motors will rotate, the drone will remain steady in air, neither flying upwards nor downwards. How to calculate that?
And, what is calibration done for?
Any help would be appreciated...
You dont need to measure the motor speed. He has just changed the PID (Proportional Integral Derivative) values each time the drone couldn't stabilize itself and crashed. And to keep the the drone steady in the air you will most likely need BMP 280 (Barometer) which measures the altitude with varying atmospheric pressure.
look up ymfc-3d by joop brooking on youtube. This is an exact copy of that. even the code is 100% the same
Ohhh!! wow genius.
I have already mentioned it in description and comment that source code of this video is from joop brokking.
nemo bondt yeah i agree he's fake
I
@@king-well-kong still better than you racist bitch
You know these projects are useless ....if copied
Hi
There isn't code for flight control in your link? Or am I wrong!?
Good job, for home made, i like that,, good luck for your project !
Bro you tried it first time, it was very unstable
But when you tried it 5-6th time,it was stable
I mean to say can you tell me what changes you made in order to make the quadcopter so stable
I love your channel
Pls reply fast
He changing in code in PID values
Can I buy whole combo pack of drone at Amazon. it is good
Brother which price
I cannot understand your Receiver and Arduino connection.. means.. [ 1-8, 2-9, 3-10, 4-11 ] Like that ??
Good job.. I think you need to thine the PID setting for stability... Work with PID = proportional, integral and derivative tuning first set the P and I and then D :
Well you would probably have to add a feed forward value first given that it's a motor.
I have a doubt.. in three wires of ESC, the signal wire is connected to Arduino pin 4,5,6,7. Then wt abt 5v and GND wire in ESC?
That's just the BEC. You don't need to connect that. If you have a board like CC3D or other you maybe able to take advantage of it.
Hye, just want to ask, when the drone is not stable, do you change any coding or anything? or you just practise control it until it stable using the controller? thank you
Yeah we want change some hard ware and code
@@encryptedchannel213 what changes di you made ,can you please tell me
The weight of the battery needs to be at the centre of gravity of the copter , precisely at the centre of gravity. Minute deviations in this causes it to be unstable like that
Hi there, very good project.
Is it possible to create pre-programmed codes or programs for its flight, rather than using a transmitter or controller?
I was also thinking the same..If any,share it with me...
for that you have to use a flight controller
yes u can, take the "flight controller code"and uncomment the part where ur receiving the data from the transmitter...then just write ur own thing. This is the lazy way, if u want ur proper code, then write it.
brothers see vid of ymfc al and eletronoobs he have the coding
Can we get same stability as APM 2.8?
why it flies unstable on starting. .. and what changes you done for a stable fly?
I did not make any changes. But after some practice you will be able to control some instability.
then the gyro work properly? and ll I change the gyro self level setup?
Tapas Kumar lol you
Tapas Kumar Indian lifehacker did not know how to set PID control.. PID control is not set so it is unstable..
No PID tuning or balancing the props? What kv motors do you use and inch of props?
My arduino quadcopter is completely work but not flying.
Issue :- I on quadcopter just flying quadcopter right side quadcopter Up and left side down and my quadcopter is cursed and this issue is more time
So dear please help me now
sir my drone is unstable what uhave done in every trial
Sir ardino cod dona
sir can i use arduino nano instead of arduino uno for flight controller?? please answer
You should have wrote on the title “how to build a DANCING drone !”
yo bro, there is one Code missing. I need the third one but there is noone in the discription.
adjust pid values it will fly stable
Raj Sekhar how to adjust the pid value
You are a life saver thank so much I really really love Indian people they are the smartest ever ❤️🙏
They will be included in my graduation speech
it is shame to steal some ones else work ,this is Joop Brooking code!
and you just changed names!
Hi... When I'm doing the setup of the first folder after uploading its show invalid signal response and error from the receiver.. kindly give me the solution plzz.. n actually I'm using the arduino nano instead of arduino uno..
perfect copy of joop broking's YMFC same source code... same hard ware
HAVE MENTIONED THE CREATOR CAZZONE
@@mrcodino9003 watch your words "nayinte mone" , oh.. and please don't forget to translate the word Mr CODINO. It's a complementary word for ur father. it's Malayalam word, if you want more. I'm here to help. i can teach you some Malayalam words, thank you 😂😂
@@sooryadevk9797 ook what?
You did nice work.
The peoples who said that you copy the code may hurt someone's feelings...
But actual thing is I used to make drone a lot of your help even I don't understand the joop's videos so lengthy & time consuming...
You did very nice explanations
Thanks buddy
HI,
upload the setup code fund the error gyro device was not found error 3 show it
Me too pls tell me if you find it
I will help you send me your's email both of u
You should upgrade your code to make it stable, and I think your gyro sensor is not well calibrated
ruclips.net/video/JMISu6yGr2U/видео.html
shame on ppl like u who steal other ppl's ideas and name it as urs....
y tho!?
I think you should read description first before Writing this comment.
I have already given credit to Brokking in description as well as in comment section.
The arduino code link doesn't have the flight_controller part. Could you check on it?
To those of you who think he "stole" the code: HE GAVE CREDIT IN THE DESCRIPTION. hahaha. A lot of you people have probably never even heard of joop brokking and you're just shit posting. Hes just showing his experience building his own!!!
Hi!Your video is very useful to me. Can you please tell me, how long the drone fly once it full charge and also the range to make fly drone without signal problem.
Credits to joop he has build this quadcopter you have steal he's arduino code!
Piet Jan is it the end of the world ?
Bouseba Adam
Yes. He stole it. Its the same as stealing someone's song and claiming that it's yours
My Name Jeff you cant compare an inspiration hard work at this ... everybody can do this that's why we call it "open source"
My Name Jeff sir .. like i told you it's an open source ! Why don't you see it on that angle like that indian got inspired from his work ?
Even mr brook dont give a fuck him self about that ...
What changes have u done to make it stable.. in trails ?
Dude shame on you. You took Brokking's work and labeled it as yours
Antii Kadad like read description
I think you should read description first before Writing this comment.
I have already given credit to Brokking in description as well as in comment section.
को
bhai maine apka pahele ka drone full tutorial dekha tha uska total 16475 ke as pas ho raha tha maine ye video dekha aur kya batau so cheap sahii love you boss you are nice bro aur jo jo apko aise vaise bat kar raha hai unko to kuch karna ata nahi apne ko bolte hai i am supporting you......broo love you
Can I use a app instead of the controller
Noo.. you need rf signal
you can try using ultrasonic sensors for bump detection so the drone wont crash into objects so you can use it indoors also and using another ultra sonic sensor on the bottom of the drone so if it detects the drone is flying too low it will automatically land or if the drone is not able to take off so it will play a buzzing noise from a buzzer so we will come to know there is a problemb with the drone
Giveaway of drone
Can this program code be used on Arduino nano?
if possible for Arduino nano, is there anything that should be changed or can be used directly on Arduino nano
the tutorial is great but in the video its like you r using a battery but you didnt mention it in the description so what type of battery you r using?
What is the use of the RC receivers and yet we were using the Arduino Uno to control flight . Can't you not program the Arduino to start and end flight by creating a program which controls the speed of the propellers?
It is possible to have a Bluetooth module than the receiver
Lol🤣😂😂😂
How many ESC's r required and how it is connected to motors??? U kept some info with u, pls send the detailed diagram......
video was nyc. one think i will ask u when the quad copter is unstable or wet to crash how to cure it??????
Hello,
if i may, everything was good and motors respoding to the rc, but after i uploaded the 3rd code "flight controller" it stopped reacting to the rc !
any ideas please?
If u have femal to femal connector what called him I forgot u can connect that waire and then off the trottel and than unconncet that femal to femal wire after that u have a good result
Why multiple trails were there in order for the drone to get stable. Is kinda drone was learning or somewhat?
I don't want the controller as it's price is high, can I use a mobile to controlle??
You can use nRF24l01 module range about 1 km
Sir
Will the transmitter connect with the drone easily or should i change any settings in transmitter?if i have to change what are the changes i have to do?
Please reply ASAP.
Thank you
Need help. Battery (5400 mAh) had slight sparking due to some incorrect connection and slight plastic part melted. Should I re-order some less mAh battery?
The flight controller must be arduino uno?, can't you use arduino nano?
Code arduino set 3 is name 3 ''Flight_controller" I can't download.
Pagal bana diya 🪔
Nice job. So something on the PID control settings to deal with the stability. You want it fast but again stable.
Hi, nice thread BTW. But can I ask to you ? How maximum weight motors can lifted? Is it go pro is easy deal to lift up ? Thanks! Hope you read this....
Sir plz answer me ......sir mere pas fsi6 transmitter h or ak dron bhi h uav dig dron ...kya mai is remote se dron ko control kar sakta hu .....kese
how did u manage the stability in flight tests??
It's all fake he is hiding many things in this video
Hi, what is your drones weight?
I'd be really happy if you answer.
Also thanks for sharing this video.
Can we use mobile to control instead of that remote 🤔
Thumbs up. But I would rather use this uno for a 3d printer build. The lack of intelligent stability in the air is a deal breaker.
Can we control the drone by connecting arduino uno with mobile through bluetooth module???plz reply
Thank you very much...
But you can show me few things..
The codes is exist with all of model of receiver ??
And what is the model of engine ?
And thank you for your time
Great done,
just tell that if we can use flysky reciever and transmitter which is of rupees 3000
Hey! Can you help me out ? What if I try using something like a radio transceiver, like nRF24L01 with an antena? Will that work ?? Please help!
Please give a tutorial, how to set camera and gimbal on aurdino based drone
Hii..
I have rc helicopter.. but its receive not working..
I just wanted to know..how to connect my old helicopters transmitter to Arduino uno...to control helicopter with old remote..i just want to replace my receive to Arduino.. is it possible?
sir why drone crashed in 4 trials and success in 5 th run. Have you tuned PID values or learned how to control copter.
How did you balance the Quadcopter?? Please reply.
I liked your video 👍🔥.
i have this problem with my drone it is also not stable for flying
Sir, can you make me a 4 DOF robotic arm car with arduino joystick shield and also give me the circuit diagram and the code for the 4 DOF robotic arm car with arduino joystick shield.
Gnd pins of ESCs are connected in which board ....Arduino or Reciver ???
It is possible to use another Receiver & Transmitter ? For example to control by smartphone on android ?
Sir, can you please also make me a 4 DOF robotic arm car with arduino gesture robot and also give me the circuit diagram and the code for the 4 DOF robotic arm car with arduino gesture robot.
hiii , the arduino code for flight control missing ?
Is it possible to control drone by using mobile phone with out any high price controller?
Ardiuno consumes more power than regular circuit
What is the solution for that
Can you suggest me something
I can't open the coding showing some problems
I did the same...but drone is not stable..we need to adjust the pid values to make it stable???
Sir how to make drone with aurdino uno, Bluetooth HC06 , battery and brushless motor. Please sir make a video on it or you can just show me the diagram and coding
what did you change in arduino for more stabilization ? where is the problem ?
Hi brother, could you send me a picture of your connections for the Receiver-> arduino? Or. Just explain me more in details. Plz help me I am doing your project for school.
Bhia ye dekh lo
is it a self learning AI, cause from first 'unstable and crash' to 'excellent' took about several flight attempts.
The problem it's crashing is because of windy area or improper motor calibration. Check on that
bro what if. one motor is 1400kv and others are 1000kv... does it makes some trouble to drone.??
Hi, I met a problem. When I lift left part, it said no angular velocity and program shows error. Can you help me?