Hey thank you. I have been building quads for 4 years this month and I learned some things watching this video, like how to run the motor wires through the protective sleeve. I also like the way you placed the arms after placing the middle plate. You used top-notch components as well rather than using cheap stuff. Great video. I wish i could have seen something similar when I started. 👍👍👍
Thanks for your nice comment. I always continue to develop and research myself. I will continue to share new information and techniques I have learned.
I'm 19, this is literally my dream, to build and fly drones I can't wait entell I can afford to start this hobby! Such an awsome way to spend your timw
This comment felt like you really said it from the heart and kind made me think you are a very kind and good person. just wanted to let that out haha ! have fun flying @greg
I've watched this a few times now cause I want to build my own FPV but I'm still confused, lol. Which wire goes where, what setting is set to what? More research is needed but thanks for the great vid. 👍🏻👍🏻
Great build! Though i will suggest using flux when soldering, as you want the solder to dissipate evenly through the entire pad to ensure a good connection.
Well most solder used for quadcopter has flux in it already. I think it is most important for rework. That’s when I also use flux pen. And sometimes with micro soldering
Upgrade the quad to BF4.3 and try the supafly juicemode freestyle preset tune. DJI SBUS fast rc link preset. 48khz BL32 frequency. Also build looks heavy so dynamic idle of 50 should be good.
Thanx ben zelf beginnend bouwer 😅 haal veel handige dingen wat ik zie uit je video en neem ik mee tijdens het bouwen...alleen heb ik pas een frame gekocht en motors de rest word afwachten en proberen en hopen 😅
Yeah, the wires aren't even close to touching the pad, I know they don't have to be in direct contact, but they should at least be CLOSE. That's just held on by a bridge of solder that's ~4mm long. Vibration, heat, and crashes are gonna desolder/break that eventually. Wouldn't take too much aggressive flying to desolder it.
Wow, Great. But just as you know, a better way for soldering, first put the tip of heater on the place and then use the lead. that way avoid cold joint.
if I have no experience in electronic. if I order those pieces and follow your steps, would I be able to put it all together, mainly the wiring and solding, or it requires some knowledge like in circuits,. Also, how much are all parts +- ? building one looks awesome, and driving it even more I hoppe you can answer my question. Thanks in advance
My first build was a tbs sauce one . And mine looks terrible compared to this 😂 I found fitting the air unit in a pain. What are the 3D printed bits called for it? Brilliant video 👍
i want to build the same drone but it is a bit expensive for my budget , i am asking if i can get rid of the controller and use a PC instead or any other simple joystick and use my PC as a monitor ??? plz if anyone can help me please answer me
RDQ carries a prop tool that looks like a pair of pliers that I use on every installation. They are not super expensive and they work on pretty much all FPV motors.
Hello. With such an amazing vídeo and drone I’m finally going to build a pretty similar one. It would be much diferente if I use the T-Motors V 1750 instead of T-Motors IV 1950?? I will also use a Nebula Pro instead. The other parts are exactly the same.
I tried to configure according to your video although preview responds according to the remote control. However, the motor does not spin, even though I am able to control motors using app.
Hola excelente video, me ayudo mucho a elegir mis primeras partes, solo una duda ¿que goggles usas para esta cámara, runcam Phoenix, es análoga o digital? 😅 me tiene algo confundido esos conceptos.
Since it is connected to an Air Unit, it requires an HD receiver like the DJI FPV goggles. You can build this using an analog camera and then you can use Fat-Shark goggles or any other analog goggles.
when you solder will be better if you put some solder flux to make the base for the solder wire and connection will be much more durable and will use less solder.
Odlično letenje, edino mogoče bi blo ok kakšna razlaga pri sestavi drona...vem, da ne razumejo vsi angleško in si veliko folka želi v fpv sceno, drgač pa lep clean build :)
Pena que não é traduzido em português. Eu gostaria de pedir a lista de peças para poder pesquisar e comprar para poder montar um. Bom trabalho ficou perfeito!
Nice one but i'd recommend a visa with the original dji camera instead of the air unit because your using a gopro anyway so no need for onboard recording also its easier to mount on a frame. But the rest of you cozen components is quite solid but just may add a bigger 1000yf cap on your esc instead of a 470one especially because your flying 6s and may look around for a tune for your build because in the flight footage was some propwash oscillation. But overall grate build 👍
Από ότι βλέπω στο βίντεο προτείνετε t-motor parts τα πιο πολλά ξέρω ότι είναι από τις καλύτερες εταιρείες και αξιόπιστες όσο αξιόπιστες μπορεί να είναι με την ποιότητα στα ηλεκτρονικά να έχει πάρει την κατηφόρα εδώ και καιρό και οι τιμές κατακόρυφα πάνω....
All Stl Files
www.thingiverse.com/thing:5372785
Que motores sería para 4s
How many prices this monster drone?
for the armguard better use tpu or pla? what the best setting for it?
@@TERBANGFPV 95A tpu
You are very good ! hihi You look like an iron man! Thank you for your video. I'm from Vietnam and I love drones like you
I don't know how much good the Drone is but the one who's flying it is much more better then the drone ‼️
I love how he says you need this electric screwdriver to complete the build..lol. been doing just fine with my $19.99 hex drivers for years..😉
lol. ok.
@@k1ortiadid you comment to your self
Hey thank you. I have been building quads for 4 years this month and I learned some things watching this video, like how to run the motor wires through the protective sleeve. I also like the way you placed the arms after placing the middle plate. You used top-notch components as well rather than using cheap stuff. Great video. I wish i could have seen something similar when I started. 👍👍👍
Thanks for your nice comment. I always continue to develop and research myself. I will continue to share new information and techniques I have learned.
Repacking DJI Air 2S Lithium battery with New Cells ! Made by 88 Eleven Shop ! ruclips.net/video/-xd-MGecKtM/видео.html
I'm 19, this is literally my dream, to build and fly drones I can't wait entell I can afford to start this hobby! Such an awsome way to spend your timw
This comment felt like you really said it from the heart and kind made me think you are a very kind and good person. just wanted to let that out haha ! have fun flying @greg
I've watched this a few times now cause I want to build my own FPV but I'm still confused, lol. Which wire goes where, what setting is set to what? More research is needed but thanks for the great vid. 👍🏻👍🏻
Great build! Though i will suggest using flux when soldering, as you want the solder to dissipate evenly through the entire pad to ensure a good connection.
Hello, Thank you for your nice comment and support. I will consider your suggestion in future videos.
Not needed with the right temp/method.
@@CraftChannelYT all price?
Well most solder used for quadcopter has flux in it already. I think it is most important for rework. That’s when I also use flux pen. And sometimes with micro soldering
hey really cool video but i wanted to ask what colorful things are over the motors cables they looks very cool
Upgrade the quad to BF4.3 and try the supafly juicemode freestyle preset tune. DJI SBUS fast rc link preset. 48khz BL32 frequency.
Also build looks heavy so dynamic idle of 50 should be good.
One of the amazing drones of 2022 is the Freestyle FPV Drone.💯
Tek kelimeyle muhteşem bu kadar profesyonel olabilir resmen şampiyon olmuş
Trông hất hầm hố và mạnh mẽ
Thanx ben zelf beginnend bouwer 😅 haal veel handige dingen wat ik zie uit je video en neem ik mee tijdens het bouwen...alleen heb ik pas een frame gekocht en motors de rest word afwachten en proberen en hopen 😅
для полудальных (и полудолгих )расстоянии надо семи дюимовый раму и пропеллеры надо!
very impresife but I would worry about power leads :) they are only on side solder joint wonder how long this will last...
Yeah, the wires aren't even close to touching the pad, I know they don't have to be in direct contact, but they should at least be CLOSE. That's just held on by a bridge of solder that's ~4mm long. Vibration, heat, and crashes are gonna desolder/break that eventually. Wouldn't take too much aggressive flying to desolder it.
Wow, Great. But just as you know, a better way for soldering, first put the tip of heater on the place and then use the lead. that way avoid cold joint.
Hi 🤠 I just found your video, very clear view of the putting together process. What is the total cost of this DIY drone?
Buenas, que buen vídeo!! Una pregunta donde puedo pillar las gomitas para los sticks de la emisora! Saludos compañero!😄
Really clean build. Bonus points for not cutting the motor wires!
why shouldnt you cut the motor wires?
@@spaserinio3978 nothing wrong with it, but I stopped cutting them because it makes it harder to reuse the motors for future builds.
Videolarınızı gördükce mutlu oluyorum işini iyi yapan insanlar varolsun , elinize sağlık sevgililerimle.
if I have no experience in electronic. if I order those pieces and follow your steps, would I be able to put it all together, mainly the wiring and solding, or it requires some knowledge like in circuits,. Also, how much are all parts +- ? building one looks awesome, and driving it even more
I hoppe you can answer my question. Thanks in advance
Helal olsun tebrikler her türlü kayit olsun cekim olsun kalite süper el becerisi ayri katagori kiskandim vallah;))
Awesome built video. Clean, concise and right to the point👍👍
ruclips.net/video/uaDd7m5tbO8/видео.html
I love this camera, drone❤❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉👍💕👌
The stability man😮
Vay arkadaş hemşeri çıktı.Dostum malzemeleri nereden tedarik ediyorsun?Linklerin bir çoğu kırık.Şu an en güvenilir nereden tedarik edebilirim?
Great Job!!! awesome video!
Awe nothin like a fresh new build. Great work man how do the f60 compare with the F40's for power and flight times? Thumbs up!
They are pretty good, however Xing2s seem to be generally better
@@sus7382 Thanks
Efmod'u görmek güzel oldu. :)
Elinize sağlık güzel bir montaj videosu olmuş.
Güzel yorumunuz için teşekkür ederim 🙏
Vay karagöl yolu harabeleri 😀 çok iyi bir video çıkmış, parçaları yurtdışından mı temin ediyoruz?
Teşekkürler 🙏 evet tüm parçaları aldığım siteler açıklamada mevcuttur
I did this build it came out good. How can I add long range antennas? Do I need adapters?
Can you please make a video on programming of drone and transmitter settings separately
Please
Полностью не смотрел ролик, так- урывками, но сдаётся мне, что по цене он выйдет как неплохой DJI.
Great Build...!! *Racing Track* is the best part...😍🤞
Seriously 😅🤓
Thanks for sharing 🥰🥰
Big like 👍👍👍
Sir I think you droped this ❤🔥.
Příliš drahý dron, váha velká, předražený projek, vše na nic. Já stavím je na zakázku a mám už desítky. Napiš mi já ti poradím.
Thanks for making this video, nice information
My first build was a tbs sauce one . And mine looks terrible compared to this 😂 I found fitting the air unit in a pain. What are the 3D printed bits called for it?
Brilliant video 👍
Source one is a bloody great Frame
Such an awesomeee job on this video 😍😍😍😍😍😍😍😍 keep up the amazing work❤❤❤❤
Really super,amazing,show how much in inr
Mükemmel bir proje başarıların devamını dilerim 🙏
Great build! Thanks for share. It just me or it feels a little heavy?
Just subscribe nice video God bless take care stay safe
Вітаю, підкажіть що за підставка під дрон червоненька така на 9.05 хвилині? Дес продається чи робили самі? Дякую.
I LOVE DRONE FPV.
Dumb question,,, so when I download the firmware for my FC in beta,,,, I want the firmware that matches my flight controller correct?
i want to build the same drone but it is a bit expensive for my budget , i am asking if i can get rid of the controller and use a PC instead or any other simple joystick and use my PC as a monitor ??? plz if anyone can help me please answer me
Top video top component ... 👑
I like your mounts for antennas.
Have you got 1 price please? Thinks for the super video 👏😍
Ωραιο βιντεο θα ηθελα να φτιαξω κατι τετοιο μπορω να ρωτησω ποσο φτανει ολο το build και εαν χρειαστω βοηθεια θα μπορουσα να εχω καποιες οδηγιες
Franchement superbe,😃👍 bravo ✨
big like 👍👍😍😍
thank you
Bravo stari 👍 zelo čisto delo 👏🌞 zdaj pa ripat bande 🤘😄💪
Nice video bro, for the first time i have ever seen a drone build very nit and clean, good job 👍👍
Great build! What is that prop grip thing you were using when tightening the props on called?
RDQ carries a prop tool that looks like a pair of pliers that I use on every installation. They are not super expensive and they work on pretty much all FPV motors.
I didn't see the screwdriver you were using can you tell me what is was. the digital battery one
Nice video, what is the brand of the digital screw driver you are using?
Quanta manobrabilidade esse Drone tem aí que incrível isso eu queria tanto ter um curto muito seus vídeos mano Vai em frente você vai se dar bem
Hello. With such an amazing vídeo and drone I’m finally going to build a pretty similar one. It would be much diferente if I use the T-Motors V 1750 instead of T-Motors IV 1950?? I will also use a Nebula Pro instead. The other parts are exactly the same.
what the max time u can flight with it?
iwonder how igot like 20 min on drone whatt kind of battry i must buy
You need way more heat on most of those solder joints. The motor joints are all very rushed and the ground pad on the xt60 is not even fully in place.
Thank you so much!!!!! God bless you!!!!!!
I tried to configure according to your video although preview responds according to the remote control. However, the motor does not spin, even though I am able to control motors using app.
Hallo vielen Dank für das tolle Video, bitte um Information wo man die 3D Daten der türkisen TPU Anbauteile bekommen kann.LG
Hola excelente video, me ayudo mucho a elegir mis primeras partes, solo una duda ¿que goggles usas para esta cámara, runcam Phoenix, es análoga o digital? 😅 me tiene algo confundido esos conceptos.
Since it is connected to an Air Unit, it requires an HD receiver like the DJI FPV goggles. You can build this using an analog camera and then you can use Fat-Shark goggles or any other analog goggles.
More comments are coming. Sometimes I can get past the answer. Thank you for helping.
when you solder will be better if you put some solder flux to make the base for the solder wire and connection will be much more durable and will use less solder.
Odlično letenje, edino mogoče bi blo ok kakšna razlaga pri sestavi drona...vem, da ne razumejo vsi angleško in si veliko folka želi v fpv sceno, drgač pa lep clean build :)
Good video but I worry about that XT-60 soldered connection to the fc
From a man who never done this before.
Look easy but….where to start 🤣🤣
Thanks, it's a great video
Beautiful spot! what frame are you rocking there btw just wondering
Love it! 🔥🤙awesome video!!New sub👍
Excelent vídeo 👌👍 Great Job 👍👌
😮 very nice
Soo much component but it’s amazing
I felt that battery was too big for it
Lol
Pena que não é traduzido em português. Eu gostaria de pedir a lista de peças para poder pesquisar e comprar para poder montar um.
Bom trabalho ficou perfeito!
Well done 👌
Great Job! Congrats!
Elinize sağlık güzel olmuş
Great video! amazing explanation.
I only have 2 Kidneys, i think I could sell one for the part list. it is enought?
çok beğendim de karagöle cıkarken ki verem savasın orda nasıl olduda denk gelemedık orasını anlayamadım :)
muito top like e inscrito garantido
Nice image quality
Nice one but i'd recommend a visa with the original dji camera instead of the air unit because your using a gopro anyway so no need for onboard recording also its easier to mount on a frame. But the rest of you cozen components is quite solid but just may add a bigger 1000yf cap on your esc instead of a 470one especially because your flying 6s and may look around for a tune for your build because in the flight footage was some propwash oscillation. But overall grate build 👍
Awesome job for your first build !
grade die einstellungen brauchen erklärungen, schade, ansonsten ein tolles video wenn es mein stummfilm wäre
woooow very very nice thank you bro.
how long does this drone fly? and how far can he fly?
Maşallah abi çok güzel olmuş
Efsane emeğinize sağlık çok güzel 👍
how much did this cost?
Thank you very much for this video. I think that the Beta Flight configuration should be explained slowly
This video is meant for professionals :D
Excellent video ♥️ Can you say that can I use GEPRC Mark 5 Pro Frame ?
How high and fast can a self made drone fly? Or are there any differences between for example in the motors
Hello, I would be interested in buying one already assembled, specifically that model, where can I get it?
Από ότι βλέπω στο βίντεο προτείνετε t-motor parts τα πιο πολλά ξέρω ότι είναι από τις καλύτερες εταιρείες και αξιόπιστες όσο αξιόπιστες μπορεί να είναι με την ποιότητα στα ηλεκτρονικά να έχει πάρει την κατηφόρα εδώ και καιρό και οι τιμές κατακόρυφα πάνω....
Hi Craft! Thanks for sharing - this was great! Question: What is the fpv drone stand? :)
Eline emeğine sağlık 👍🏼👍🏼👍🏼
Wow so beautiful.