we call them anti foulers they are used when an engine has blow by in the cylinder and keeps fouling out the plug with oil from the blow by so the antifouler pulls the plug out farther from the cylinder to help keep it away from the oil and prevent a miss in that cylinder. Enjoying the channel keep up the good job. Arkansas Dave
Something to add to your toolbox: I had a 60's vehicle once that would start and die as soon as the starter disengaged. Turned out, on the starter solenoid the small wire on the left went through a ceramic resistor to the keyswitch and the one on the right went straight to the coil giving a hotter spark during starting. My resistor had gone out, causing the engine to die when the solenoid cut out.
I see people call them different names. Where I'm from they're known as "De-Foulers" Now that there air cleaner is some sweet piece of work eh?? LOL. Think that's doing a lot of cleaning of the intake air do ya? Or more like making it difficult to get air into the CARB?? LOL. Great fun video and everyone loves these old Ford and Chevys from these years. Dodge too! Except maybe PEG from "ZIP TIES N BIAS PLIES"
@@JMRRebuilders I'm keeping my eyes open and fingers crossed so far only ones I've found closes to me there's no title and parting out and I know of one up the road from me they got the truck torn apart but all parts are in cab and bed covered with a tarp that's been replaced several times just they won't part with it I've asked about it and one of my wife's uncle that past away had also they it's been sitting for at least going on 10y now in the same spot and condition
Yeah we run into that all the time it does happen. Just have to be ready to buy when it comes brother and have the cash ready. If you stay after it it will come.
Hello Again From Kentucky, The “NonFoulers” were a band aid approach to dealing with cylinders that had problems with oil blow by which could also include bad valve stem seal’s which somewhat kept the engine oil from fouling the spark plugs. I have used those things before myself with both good and bad results. From your compression test that I had seen, I would try to replace the valve stem seals first.
@@JMRRebuildersIt’s been quite a while since I had seen or heard mention regarding the “NonFoulers” until the question was asked. I’m not sure if Dorman still offers those things these days, But before the fuel injection engines become very common, Once the older engines reached a good number of miles the “NonFoulers” could buy you a bit of time until you could deal with the valve stem seals or whatever you chose not to do that you probably should have done. Yeah I will stick with that explanation.(LOL).
One model year before self-plugging exhaust became standard equipment, good score. That spider is a beastie all right, but thank goodness you don’t live in Australia.
@@JMRRebuilders Hi there, I'm from the Balkan peninsula, Macedonia to be more precise. Its mostly mountanous terrain country so a pickup truck would have been most welcomed but mostly due to import taxes, American vehicles were never imported. I get to see one super rarely but its from some guy who lives or works in the States and just showed up on vacation with it.
Well, stay tuned cause, as you will soon see, compression is not the issue on this old girl. From what we been told it's for blow by. Thanks for comment and support.
The Writing Spider, also known as the yellow garden spider or Argiope aurantia, is not considered dangerously venomous to humans or pets. While they may bite if provoked, their venom is typically harmless, causing effects like a bee sting. " Let's Go "
I don't think they will honestly. These Ole trucks are very simple today's stuff is complicated. I wonder if anyone's gonna want to even try them like we do the old ones. Thanks for comment and support
@JMRRebuilders ...ok like watching yall ..I'm working on a 78 bronco xlt...dad's got a ol 75 f100...I've loved theses ol fords since I was kid ..thanks to my dad's old ford.haha..40yrs later to me best trucks round
Heck yeah she is pretty sweet. We got plans for her so stay tunned. Check out our other content we got a few old fords. Thanks for comment and support.
Great question. To be honest we are currently working on a couple in the background. Honestly people don't seem to like those videos as much. Would you be interested in a follow up on this truck? Thanks for comment and support
@@JMRRebuilders it looks like it wasn’t your issue in this video I just commented as I was watching and it was only seeming to stay running with starter engaged. It’s part of the ignition system there’s tons of videos of people running into that issue getting these old fords running. Just a mental note for any future revivals that may be your issue if that is your symptom. Thanks for saving this old ford ! Coming from a GM guy
A 302. Is a good motor but the 300 6.cyl is the best in my book. I have a 81 f150 300. 6cyl. 4 speed 4wd. Pulls like a scalded dog. Pulled many Chevy's out with it. In the mud and snow or where they couldn't go. Big Mike from Kentucky
At least other provinces weren’t so near sighted and kept their Government houses… Perhaps downsizing the square footage would have been a better choice…same garbage happened with the old university Armoury of the 48th…most politicians are wacko
With all due respect. I must tell you. Your views would be a lot more. If your cameraman would stay quiet. And stop saying your name and let's go a thousand times in a video. It is very annoying. Watch other RUclipsrs. That are successful.. there's no shame in learning how to do something right from other people. I like watching you guys. But damn your camera man talks too much. And as I said before I do not mean to offend anyone. It's just my opinion. And I'm sure a million viewers have the same thoughts I do. Keep up the good work Landon. You're great. But your camera man is costing you... Y'all have a nice day.
First off thanks for the comment and support. Second this isn't landons channel. It is Ryan and Landon trying to save these old trucks. It isn't Landon and a cameraman. There are tons of soulless, joyless, non emotive, borderline depressing eeyore guys out there. If that's more your speed go watch them. If not then enjoy. But this will be Ryan and Landon. Not Landon and a cameraman.
That color kinda rare kinda not ford would slap whatever parts, paint etc on other year fords they had laying around to build these trucks thats a ford 302 they good small block engines so are the 351s
LETS GO THANKS FOR JOINNIG CHECK OUT THIS HARD TO START DIAMOND F250 ruclips.net/video/cYcq_DKsigI/видео.html
we call them anti foulers they are used when an engine has blow by in the cylinder and keeps fouling out the plug with oil from the blow by so the antifouler pulls the plug out farther from the cylinder to help keep it away from the oil and prevent a miss in that cylinder. Enjoying the channel keep up the good job.
Arkansas Dave
Heck yeah thats great information thanks Arkansas Dave we appreciate the support and comment
Keep them Old FORDS RUNNING!! Another one soon to be road worthy again! Nice job y’all. Let’s Go!!!!
Let's go brother we appreciate the support and comments.
Something to add to your toolbox: I had a 60's vehicle once that would start and die as soon as the starter disengaged. Turned out, on the starter solenoid the small wire on the left went through a ceramic resistor to the keyswitch and the one on the right went straight to the coil giving a hotter spark during starting. My resistor had gone out, causing the engine to die when the solenoid cut out.
Now that's some good information. Thanks for comment and support
Thank you all so much for joining and watching shes a sweet truck. See yall soon on the next one.
Awesome 👌🏼 👏 👍 😍 getting the pick ups road worthy again.
Heck yeah brother thats right. Thank you fro your comment and support.
Oil fouled adapters for oil consum7ng, bad valve guides usually... Landon and Ryan. Ray from Wisconsin here, luv da vids, you two make me laugh!!
That's awesome brother. Thank you so much for the comment and support we def appreciate it.
I see people call them different names. Where I'm from they're known as "De-Foulers" Now that there air cleaner is some sweet piece of work eh?? LOL. Think that's doing a lot of cleaning of the intake air do ya? Or more like making it difficult to get air into the CARB?? LOL. Great fun video and everyone loves these old Ford and Chevys from these years. Dodge too! Except maybe PEG from "ZIP TIES N BIAS PLIES"
Heck yeah awesome sauce. Not sure it does much of anything. Thanks for comment and support
Wish this was mine i would love to own it just the way It is
Yeah she's a good old truck for sure brother. They are out there just gotta keep an eye out. Thanks for comment and support.
@@JMRRebuilders I'm keeping my eyes open and fingers crossed so far only ones I've found closes to me there's no title and parting out and I know of one up the road from me they got the truck torn apart but all parts are in cab and bed covered with a tarp that's been replaced several times just they won't part with it I've asked about it and one of my wife's uncle that past away had also they it's been sitting for at least going on 10y now in the same spot and condition
Yeah we run into that all the time it does happen. Just have to be ready to buy when it comes brother and have the cash ready. If you stay after it it will come.
Hello Again From Kentucky, The “NonFoulers” were a band aid approach to dealing with cylinders that had problems with oil blow by which could also include bad valve stem seal’s which somewhat kept the engine oil from fouling the spark plugs. I have used those things before myself with both good and bad results. From your compression test that I had seen, I would try to replace the valve stem seals first.
This is great information and thank you so much for it. That's great. Thanks for comment and support
@@JMRRebuildersIt’s been quite a while since I had seen or heard mention regarding the “NonFoulers” until the question was asked.
I’m not sure if Dorman still offers those things these days, But before the fuel injection engines become very common, Once the older engines reached a good number of miles the “NonFoulers” could buy you a bit of time until you could deal with the valve stem seals or whatever you chose not to do that you probably should have done. Yeah I will stick with that explanation.(LOL).
Let's go
That truck has no rust pretty solid
she is pretty clean for sure brother. Thanks for comment and support.
@@JMRRebuilders fixed or rust. Damger
Not any we saw.
When I was a kid I met those things as oil burners. Keeps oil from fouling your plugs.
Yeah man that's what we been told. Thanks for comment and supprt
1967 to 72 is the bumpside era
Yeah man your right.
With several Late Model Ford trucks, you have uncovered a jackpot.
Thanks brother. We are truly blessed. Thanks for comment and support
Nice job sir Nice Ford truck Nice show sir 😃👏👏👏👏👍👍👍👍👍
Heck yeah we appreciate that thanks for comment and support
Entertaining videos. Keep up the good work. I enjoy trying to guess what could be wrong before Landon figures it out.
Let's go brother. That's so awesome. Thanks for comment and support
Let's go Landon!!!! Love watching yall guys !!!!
Heck yeah brother. Thanks foe comment and support
Anytime I love watching yall work on the trucks !!!
Heck yeah
THE FORD CUSTOM 77. 78. 79 THE MOST BEATIFUL TRUCK THE POWER AMERICAN 💪🇺🇸 SALUDOS CARROS MJ 🇨🇷 🖐️
Right on!
would love to see a video of it getting cleaned out and 1st wash in 26 years!!!!
Heck yeah we got plans stay tuned. Thanks for comment and support
It helps to keep your plugs from filling out on oil. Oil rings are likely bad. Causing your plugs to foul out fast .
Yeah man your def right about that one for sure. Thanks for comment and suport brother. We appreciate it
Great job guys Let’s Go!! 😂 Thanks for sharing and have a great weekend!!
Heck yeah brother. Thanks for comment and support
One model year before self-plugging exhaust became standard equipment, good score.
That spider is a beastie all right, but thank goodness you don’t live in Australia.
Will we get it to run and drive?
love it reminds me of my 77 same color cool
Heck yeah. That's super cool. Thanks for comment and support
Either 302 or 351 Windsor , small block , good motors
Heck yeah great motors. It's a 302 so def got that thanks for comment and support
No Windsors in the Trucks during these years!, Was almost another 10 Yrs and another generation when they started using them in Trucks "1983"
Thanks for that information.
Love this model truck
Heck yeah brother shes sharp for sure. Appreciate the support and comment
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
LET'S GO
Let's go brother thanks for comment and support
I think he stole it from Brandon 😂
Nah Brandon stole it from me. Let's go.
👍👍
That was fun!!
Heck yeah brother that's so awesome. Check out our other content, brother. Thanks for the comment and support
Good ford truck
Heck yeah she's. Thanks for comment and support
Landons the man!! He is in the 21st century with the battery powered weedeater. I have the same and love it
Yeah yeah no way jose gas till I die homie g
FORD CUSTOM 250 78 MY DREAM THE POWER AMERICAN 💪🇺🇸 SALUDOS CARROS MJ 🇨🇷🖐️
Right on!
Would like to see it back on the road
Agreed. Thanks for comment and support.
Cool old Ford truck. My favourite from Ford. I wish we had them here in Europe, but they were never available.
Yeah that's a great teuck for sure. What part of Europe? I was born in England. Thanks for comment and support
@@JMRRebuilders Hi there, I'm from the Balkan peninsula, Macedonia to be more precise. Its mostly mountanous terrain country so a pickup truck would have been most welcomed but mostly due to import taxes, American vehicles were never imported. I get to see one super rarely but its from some guy who lives or works in the States and just showed up on vacation with it.
That's crazy.
❤nais God of the very good 👏🙋♂️🇱🇷🚙
Thank younfor the support
If ya all was near me I'd buy that F100
Heck yeah brother. Nothing a trailer can't fix. Thanks for the comment and support
Common problem took mine 76 over the Mississippi River bridge barely made it up what a relief when she crested drove it Miami
That's awesome. Love it. Thanks foe comment and support
Outstanding
Thanks for comment and support we appreciate it brother
@@JMRRebuildersyour welcome.
Did you check the transmission fluid level
Yes we did somehow didn't catch it. Thanks for the comment and support
Solid truck
She is pretty sweet. Thanks for comment and support
Maybe a 400. Cube. ?
She just w little 302 brother thanks for comment and support.
7:24, Doesn’t the Fowler help when you have low compression??
Well, stay tuned cause, as you will soon see, compression is not the issue on this old girl. From what we been told it's for blow by. Thanks for comment and support.
Let's go
Let's go. Thanks for comment and support
cotton spider, not dangerous
They sure look way more dangerous. Them things are angry. Thanks for comment and support. Check out our other content
72 and down is a dip is a bump side 73 and up to 79 is a didn't sign
I believe what your saying is 67 to 72. But I get what your saying. Thanks for comment and support. Check out our other content
The Writing Spider, also known as the yellow garden spider or Argiope aurantia, is not considered dangerously venomous to humans or pets. While they may bite if provoked, their venom is typically harmless, causing effects like a bee sting. " Let's Go "
Dude let's go that's somr great info for sure. Thanks for that knowledge, comment and support
Is the roll back in background for sale?
I can ask make qn offer I'll take it him.i believe it has a 7.3 motor in it
yaaa .... let's go .
Heck yeah brother let's go. Thanks for comment and support
They say that thing is used to keep the oil off the plug before it starts
Good to know brother. Thanks for comment and support
LEYYYYS GOO
Heck yeah brother let's go. Thanks for comment and support
The Fowler is for a oil burning motor. It helps keep the spark plugs for falling out
Good to know did you happen to catch our latest video it's a 67 short bed sat for 26 years. Thanks for comment and support
Maybe a 351.
Man we wish. She's just a 302. Thanks for comment and support
That's looks like a FE 360,I got a 72 f250 ranger camper special with a 360 but it could Also be a 390 as well
Man we wish it had anyone of them. She's just a little Ole 302. Thanks for comment and support
In order for them to run ( lol 😅
Thanks for comment and support
So you got it running then use it or let it be
Well depends on the truck and owner. We have a couple that will be making a second and maybe 3rd appearance. Stay tuned
@@JMRRebuilders thanks for your reply back
Heck yeah
It was golden Garden Spider
Good to know from what we been told nothing to worry about. Thanks for the comment and support
Banana spider harmless
That's what I thought they was called. Good deal. Thanks for comment and support
fauler in the head and then the spark plug, Reason is engine is passing oil to the spark plug, the fauler keeps the spark plug dry
yeha man thats what we been good stuff brother. Thanks for comment and support.
Antifouler usedfor keeping the spark plug clean when the engine is worn out and blowing oil by badly
Good to know ao not a good thing to see? Thanks for comment and support
Rings or valve seals might be worn out
Good to know.
I had a worn out 200-6 in a Maverick that had non-foulers on EVERY PLUG! 🤣
That sucks.
JMR in 50 yrs from now will all them new vehicles start and drive like a Ford.
I don't think they will honestly. These Ole trucks are very simple today's stuff is complicated. I wonder if anyone's gonna want to even try them like we do the old ones. Thanks for comment and support
1967-1972 are bumpsides, 1973-1979 are dentsides...
Yeah brother. Nailed it brother. Thanks for comment and support.
I own a blue Ford 77 truck 80s
Let's go brother that is awesome. Thanks for the comment and support
What do yall do with all theses trucks after get them running?..sale them?
Depends in the owner. We go into detail on tomorrow's video on a couple of them. Stay tuned. Thanks for comment and support
@JMRRebuilders ...ok like watching yall ..I'm working on a 78 bronco xlt...dad's got a ol 75 f100...I've loved theses ol fords since I was kid ..thanks to my dad's old ford.haha..40yrs later to me best trucks round
Yeah these trucks are pretty great for sure.
Open that back sliding back window
Heck yeah Def didn't think of that thanks for the comment and support brother
It’s not a strong engine if it has five non-Fowler on the plugs 72 is a bump side truck
1967 to 1972 then 1973 to 1979. I think the engine could be a 302 or a 360.
Its a 302. Thanks for comment and support.
Man I want that old Ferd
Heck yeah she is pretty sweet. We got plans for her so stay tunned. Check out our other content we got a few old fords. Thanks for comment and support.
It’s not a strong engine if it has five non-Fowler on the plugs
Well that sucks brother. Thanks for comment and support
That engine is a ford 302 small block
Yes sir you nailed it. Thanks for comment and support we appreciate it
Let’s go spoils the videos
Cool thanks for comment and support
what is rare about this truck ?
Thanks for comment and support
302 ...
Heck yeha brother got it. Thanks for comment and support. Check out our other content
Way do you waste time on these trucks if you are not going to fix them up
Great question. To be honest we are currently working on a couple in the background. Honestly people don't seem to like those videos as much. Would you be interested in a follow up on this truck? Thanks for comment and support
Whenever these old fords run only when the starter is spinning it is a BALANCE RESISTOR issue! 100% your issue
@kalh.9241 interesting. Not sure what that is so where is it located. Thanks for comment and support
@@JMRRebuilders it looks like it wasn’t your issue in this video I just commented as I was watching and it was only seeming to stay running with starter engaged. It’s part of the ignition system there’s tons of videos of people running into that issue getting these old fords running. Just a mental note for any future revivals that may be your issue if that is your symptom. Thanks for saving this old ford ! Coming from a GM guy
Heck yeah brother love that. Did ya see our other content?
@@JMRRebuilders yes been watching what I can haha first one I saw was the short box red like 94 Chevy you guys sure find some solid old rigs
Heck yeah brother we are blessed the lord keeps bringing them we keep filming them.
Stop saying let’s go every other word
Thanks for comment and support
This phone says what it wants I meant 72 and down bump side 73 to 79 dent side
No worries it happens. I got whatcha was meaning.
360 ci
Man we wish. It's only a 302 thanks for comment and support
Oil burner
Seems to be for sure. Thanks for comment and support
I guess 302
Yeah you nailed it
Because it smokes and it is a Ford
Well if it's smoking it's running let's go. Thanks for comment and support
A 302.
Yeah man nailed it. Thanks for comment and support.
A 302. Is a good motor but the 300 6.cyl is the best in my book. I have a 81 f150 300. 6cyl. 4 speed 4wd. Pulls like a scalded dog. Pulled many Chevy's out with it. In the mud and snow or where they couldn't go. Big Mike from Kentucky
heck yeah brother so do you think we paid too much for the short bed? We paid 800 for the blue one that needs tranny
At least other provinces weren’t so near sighted and kept their Government houses…
Perhaps downsizing the square footage would have been a better choice…same garbage happened with the old university Armoury of the 48th…most politicians are wacko
So while I agree about politicians part. Not sure I understand the rest. Thanks for comment and support
302
HECK Yeah nailed it LETS GO. Thanks for comment and support
@@JMRRebuilders yes sir good video
I'll buy your 74 truck for 3 hundred
yeah we are good thanks for the offer.
With all due respect. I must tell you. Your views would be a lot more. If your cameraman would stay quiet. And stop saying your name and let's go a thousand times in a video. It is very annoying. Watch other RUclipsrs. That are successful.. there's no shame in learning how to do something right from other people. I like watching you guys. But damn your camera man talks too much. And as I said before I do not mean to offend anyone. It's just my opinion. And I'm sure a million viewers have the same thoughts I do. Keep up the good work Landon. You're great. But your camera man is costing you... Y'all have a nice day.
First off thanks for the comment and support. Second this isn't landons channel. It is Ryan and Landon trying to save these old trucks. It isn't Landon and a cameraman. There are tons of soulless, joyless, non emotive, borderline depressing eeyore guys out there. If that's more your speed go watch them. If not then enjoy. But this will be Ryan and Landon. Not Landon and a cameraman.
That color kinda rare kinda not ford would slap whatever parts, paint etc on other year fords they had laying around to build these trucks thats a ford 302 they good small block engines so are the 351s
Yeah from what i was told is wind blue and nit very common. Thanks for comment and support
Chevys aint special they breakdown to
That's for sure brother. Thanks for comment and support
It's foroleburning keeepsit filling out
Good to know. Thanks for comment and support.
302
Yeah, man, you nailed it. Thanks for comment and support