I got my 1341 about 5 months before this video. I had Rubin and Joe get me a half table setup, basically no table left of the machine head and it works great.
thank you. I bought this machine from Ralph's last spring, (GC1341). I love it but need to call about seeing if i can adjust the needle down position. In needle down it's not holding the fabric (like just barely hitting the fabric and not all the way through it). . i'm sure there is an adjustment in there but havent' been able to figure it out. otherwise the machine is great.. just need to fix that and hoping it's an easy fix.
Congratulations Siah! And thank you for all the fun q&a. When I get the funding and opportunity I plan on driving from Oregon and buy my first industrial machine from Ralph’s♥️
This was very helpful. I obviously didn’t want/need direct drive. I just needed the regular 0302 and just add the speed reducer and needle positioner to it. I’m kind of used to it now though. Now I want a cylinder arm so I don’t struggle with gussets and doing the final topstitch😂
I was really hoping they would touch on the differences between the 0302 and 0302D. They say it's the same machine as Kassia's, just with a needle down option...but it is not. So many things i wish I had known.
Great idea for a video and still got a lot from it just a shame the sound kept coming and going like there was a problem with microphone for some reason. ❤
Yep same here in Sweden, the seller said it's not sold in Europe at all (or something of that effect), not sure why. Have not had any issues without the clutch though on my 1541, but still don't understand why it's not a choice.
The cylinder arm is manual oiling. It’s has red dots on the machine to show you where to oil. Usually oil it and change the needle after 8+ hours of sewing. He does go over this in the video. I usually change my needle and oil after every project, but that might be overkill🤷♀️
Is it typical for Ralphs to sell the floor model that you test in the shop? Paid for new and they gave me the floor model i used😟They said that's how they always do it (so its tested) Is that how they gave you yours?
Yes I believe it is, they want to make sure you are comfortable with the machine you buy. If you get one that hasn’t been tested and adjusted then you would have issues I believe.
I’m so sorry! We were trying our hardest to answer everybody’s question. You can always message me personally, and I will try the best I can to answer what questions you have.
He so caring to share his knowledge. I am from Michigan
I got my 1341 about 5 months before this video. I had Rubin and Joe get me a half table setup, basically no table left of the machine head and it works great.
13:58 Hold your threads!!! The best advice I can give you. Love my cylinder arm!! Congratulations 🎊!!!
Yes! Thank you!😊
Im planning to go visit there while i visit my son in Montana...cant wait to see the sewing beauties...planning to get the same as you Siah..
That was fantastic. I really really wish the dealer that sold me my machine was as kind and helpful as Jack was there!
The man that sold me my first Industrial Sewing Machine!
I’m so excited for you! I have the Thor 1341 and it’s definitely a game changer!!
Just send memo to them about a foot recommendation. I have Juki 1341 and as usual, thanks for all info.
thank you. I bought this machine from Ralph's last spring, (GC1341). I love it but need to call about seeing if i can adjust the needle down position. In needle down it's not holding the fabric (like just barely hitting the fabric and not all the way through it). . i'm sure there is an adjustment in there but havent' been able to figure it out. otherwise the machine is great.. just need to fix that and hoping it's an easy fix.
Thank you so much Kassiah & Susan! This was so informative! I need to give Jack a call!
I am so glad finding you❤
Congratulations Siah! And thank you for all the fun q&a. When I get the funding and opportunity I plan on driving from Oregon and buy my first industrial machine from Ralph’s♥️
This was very helpful. I obviously didn’t want/need direct drive. I just needed the regular 0302 and just add the speed reducer and needle positioner to it. I’m kind of used to it now though. Now I want a cylinder arm so I don’t struggle with gussets and doing the final topstitch😂
Can't sew...don't sew and yet i still loved this video. Maybe in my next life I'll be able to sew.
Congratulations on your newachine!! Triple feed is the best! I have a Juki 1541S.
Thank you! This was very helpful. ❤
Commonly called a Compensation dial for thick fabric. 😊
GREAT DEMO! 👏👏👏👏
I was really hoping they would touch on the differences between the 0302 and 0302D. They say it's the same machine as Kassia's, just with a needle down option...but it is not. So many things i wish I had known.
Great idea for a video and still got a lot from it just a shame the sound kept coming and going like there was a problem with microphone for some reason. ❤
Sorry about that, my voice carries so well and others don’t …. Next time we will mic him up for sure!
Great video. Looking for a Kingmax dealer in Central Pennsylvania.
In the U.K. we can’t buy the 1541S. Really annoying
Yep same here in Sweden, the seller said it's not sold in Europe at all (or something of that effect), not sure why. Have not had any issues without the clutch though on my 1541, but still don't understand why it's not a choice.
It sounded like the camera operator's finger was over the microphone. Very hard to hear the man speak.
I know it. Next time we will get mics for sure
@@SiahSwag we adore you over here and love watching your videos! xoxo
Do you carry parts for the Techsew 2750 Pro cylinder arm?
It's OK just answered my question 😅
Have him add the drop down roller it's perfect to keep you straight
Does the cylinder arm line to sew cotton?
Not sure I’ll be testing it out through!
❤
How often do you oil the cylinder arm and where
The cylinder arm is manual oiling. It’s has red dots on the machine to show you where to oil. Usually oil it and change the needle after 8+ hours of sewing. He does go over this in the video. I usually change my needle and oil after every project, but that might be overkill🤷♀️
He needs the Mike hard to hear him.
Is it typical for Ralphs to sell the floor model that you test in the shop? Paid for new and they gave me the floor model i used😟They said that's how they always do it (so its tested) Is that how they gave you yours?
Yes I believe it is, they want to make sure you are comfortable with the machine you buy. If you get one that hasn’t been tested and adjusted then you would have issues I believe.
@@SiahSwag I love my new machine!! Are there any special presser feet you recommend for it? Thanks for the replies😀
So sad I guess I was a ghost cuz NONE of my questions were answered. Kinda gave me a not wanted feeling. Oh well thats ok. ENJOY your new machine!!!
I’m so sorry! We were trying our hardest to answer everybody’s question. You can always message me personally, and I will try the best I can to answer what questions you have.
Kathie- it’s incredibly hard to read EVERYONES comments from a phone. Also- you have a Thor. There’s an entire fb group you can ask any questions in.