Congratulations! I have been a wheel horse afficionado before I even knew the brand. Awesome tractor's! Thanks for watching and happy wheel horsing! 👍😁
I have a toro 520h as well and 42 inch rear discharge deck as well, what belt sizes did you use for the deck and the deck to tractor belt, I assume they are 2 different size belts? Will tractor supply huskee belts work?
The belt I replaced on the deck is P/N: 106125 (1/2" x 89" long). The PTO to the deck is a different belt. I found information ranging from 98 to 104 plus long belts on the mule drive, but have not replaced it on this unit. You have some flexibility here from the spring adjustment. Yes, different brands of belts will work fine. Thanks for watching! 👍😁
Excellent video, seen this before but didn't pay enough attention. I have an auto 12 with 42 in rear discharge. Been trying to get my 520h going I got this about a year ago, just now getting it in shape to work. I got the brake fixed, and parking brake adjusted according to specs. Also changed the fluids and put ag tires on rear . Replaced cam plate on hydraulics and it runs like top now. Had a grader blade on the rear sleeve hitch and pulls no problem. Finally did some work on 48" side discharge deck and ended up swapping a spindle and putting new bearings in all 3.... I can't seem to get height set right. It wants to cut too low Any suggestions on how to set deck height I got the deck manual for 78360 but I can't seem to get this deck height adjusted right
Thanks! Sounds like quite the project. I am happy you are keeping Wheel Horse history alive! The deck should ride on the rear adjustable wheels with the lift in the full down position. Next adjust the linkage on the deck so the front of the deck is level. The deck rides on the rear wheels and the front hangs on the lift. None of the other wheels should be touching the ground at this point. The rest of the wheels should be raised slightly above the ground. Their only purpose is to prevent scalping the ground on uneven terrain. Thanks for watching and happy wheel horsing! 👍😁
Hey OP, what's your opinion of the RD VS the SD decks? I was just given a 520H for free by a friend, and I've removed the WAY too heavy and difficult to work with 60" SD deck and want to get a smaller deck, most likely a 42". I've been asking online about the subject and some love the RD, others don't. Some say the RD will cause problems for the hydrostat fan on a 520H. Others say the RD is not good in high grass?
Hi! I favor your same opinion. This tractor was equipped with a 60" side discharge deck since it was new. They are great for large open areas, but the deck is very cumbersome to handle and maintenance. It's heavy! I think rear discharge decks are great. They take high grass, cut it down, and lay it on the same cut path. It looks nice, consistent, and you can mow around things on both the right or the left. The only disadvantage is they do make the rear of your tractor a little grassy / dirty. I do not think it will cause you any problems. Check your rear end / hydro pump area occasionally and blow out the fins. I cleaned this one and it had grass in the fins from operating the side discharge deck. It blows around it anyways. Once you try a smaller side discharge you won't want to go back. Thanks for watching! 👍😁
@@FlatThunder Cool. I think I'll go with the RD deck then. It'll keep the grass out of my womans flower beds. I've mainly mowed her yard area weekly with a RD push mower and my three acres of horse pasture that is bumpy, hilly, has a lot of obstacles to maneuver around with a Craftsman 42" rider, so the grass and weeds in the pasture get a foot tall sometimes before I get around to mowing it. The 60" deck is indeed a beast. So far, I haven't been able to find the OEM specs on it or its weight. According to one Wheelhorse chart I saw, the 36" deck weighs 100 lbs, and for each 6" increase in size, the weight goes up 30 lbs. So the 60" should weigh around 220 lbs. But according to a couple of members of the FB WheelHorse forum, it's more like 320!
@@dkeith45 you will have to watch the trailing wheels and the rear tire interface. Mine come very close when backing up on unlevel terrain. I believe the deck is around the 300 lb mark easily. You will like the rear discharge! Cheers
@@FlatThunder i have used all the decks you mentioned -- RD leaves nice look - two tips for RD users - attach a 2-3 inch rubber flap to back lip of mower deck that deflects the grass down -- and then at end of each cut use leaf blower to clean the tranny fins - the SD is great --but although we are all expected to use the safety chute on end of deck for safety reasons, you will get wider more distant dispersal of grass without the safety chute attached - the 60 inch is a monster for big flat areas but don't plan on taking it on and off frequently because so awkward -- but that invites neglect -- so grass will accumulate and risk rot and bad cutting efficiency -lastly, the best way to determine the proper PTO belt slack is about 1 inch of slack when you pull on the belt
I live in Ohio. I bet you can do it! Check for spark first. If it has spark and it doesn't run it has to be fuel related; clean carb and check the lines/fuel pump. You got this! Thanks for watching 👍😁
my 520 runs like a tank, but the 42 rear discharge clogs on anything, and burns up my pto belt, any idea, seems my deck front is lower than the rear, also contemplating cutting out the baffles underneath,
I believe the deck should be adjusted so it is relatively level. The other conditions are hard to gage without seeing the exact scenario. Maybe you are buying too long of a belt and or not providing enough tension? Thanks for watching and best is luck on the repair! 👍😁
@@FlatThunder goter figured out a hook thingie with a adjusting bolt on the rear side of the deck, was off, hooked it in cuttin like you in your vid, now/
Would you be able to take pictures of the deck height adjuster? I have to replace one on the deck for my wheel horse and the diagram for the parts is kinda difficult to understand what goes where.
Sure no problem! I can send you some tonight. Please email me your address and or contact me on the channels Instagram / FB page. Glad to help. Thanks for watching! 👍😁
Sorry if I missed your correspondence. I didn't catch a message from you on FB/Instagram or on the channels email. I thought about it today since I fired up the tractor. Check out Instagram or FB. I posted pictures of it. I hope it's helpful. Cheers 😁
Maybe some of the best plain spoken, sensible translation of technical knowledge to user application I think I've ever heard also I think I would have pressure washed and degreased the deck before installing the new belt and doin' the Lock'nLube! Maybe enlighten me as to why you chose to install the belt first and then degrease, power wash? Yeah! Once she heats up that grease will start to flow into all the right spots. Can't get over how heavy duty the snow blade arm set up is. I'm definitely interested in a set up like that but not sure I'll find that exact set u under a toadstool any time soon but at least I'll know what to look for and that's half the battle. Mule drive and PTO is well explained and good video with some not too weird music. There is some weird music and a lot of videos. That 520 is a tank! It looks like you're going into shock & awe mode with them dandelions not standing a chance against that well serviced machine. Thanks for the great video enjoyed it much!
Thanks! I'm glad you enjoyed the video. It's difficult to find the right balance to please the masses. Some enjoy the extended explanations and others complain I talk too much 🙄. Pressure washing before the new belt would be ideal....I think my pressure washer needed serviced when this video was taken. Thanks for watching and sharing! 👍😁
@@rammanjr88 I like where you're going with that....I haven't had either off since the 90's. If they clear this different deck I might just leave them on. Haha 😂
The lever / arm around the pto clutch disconnects and swings out away from the step pulley. Relieve belt tension using the knob on the front of the tractor, slip the belt over the step pulley, reinstall the engagement arm, tension belt and you should be good to go! Thanks for watching 👍😁
Beast of a machine. I run a 60" deck on mine!
I ran one with a big deck for years! They can do some serious mowing. Thanks for watching! 👍😁
10:45 est. very good and explains things easily
Thanks for watching! Happy Wheel Horsing 👍😁
Nice 520! Just like the one I’ve been working on for my grandpa. Your videos are very helpful!
Thanks, I am happy to help! The first 520 video on the channel was my Grandpa's tractor. Thanks for watching! 👍😁
Thank you for the video! I just got a wheelhorse mower with both decks and a snow blower. Your video will come in handy!
Congratulations! I have been a wheel horse afficionado before I even knew the brand. Awesome tractor's! Thanks for watching and happy wheel horsing! 👍😁
would love to find a plow for mine but i have the blower which is great!
Blowers are nice too! The plow is nice for speed removal on snowfall less than 3-4" max. They are tanks! Thanks for watching! 👍😁
I have a toro 520h as well and 42 inch rear discharge deck as well, what belt sizes did you use for the deck and the deck to tractor belt, I assume they are 2 different size belts? Will tractor supply huskee belts work?
The belt I replaced on the deck is P/N: 106125 (1/2" x 89" long). The PTO to the deck is a different belt. I found information ranging from 98 to 104 plus long belts on the mule drive, but have not replaced it on this unit. You have some flexibility here from the spring adjustment. Yes, different brands of belts will work fine. Thanks for watching! 👍😁
@@FlatThunder thank you!!
Excellent video, seen this before but didn't pay enough attention. I have an auto 12 with 42 in rear discharge. Been trying to get my 520h going
I got this about a year ago, just now getting it in shape to work. I got the brake fixed, and parking brake adjusted according to specs. Also changed the fluids and put ag tires on rear . Replaced cam plate on hydraulics and it runs like top now. Had a grader blade on the rear sleeve hitch and pulls no problem. Finally did some work on 48" side discharge deck and ended up swapping a spindle and putting new bearings in all 3.... I can't seem to get height set right. It wants to cut too low
Any suggestions on how to set deck height I got the deck manual for 78360 but I can't seem to get this deck height adjusted right
Thanks! Sounds like quite the project. I am happy you are keeping Wheel Horse history alive! The deck should ride on the rear adjustable wheels with the lift in the full down position. Next adjust the linkage on the deck so the front of the deck is level. The deck rides on the rear wheels and the front hangs on the lift. None of the other wheels should be touching the ground at this point. The rest of the wheels should be raised slightly above the ground. Their only purpose is to prevent scalping the ground on uneven terrain. Thanks for watching and happy wheel horsing! 👍😁
Hey OP, what's your opinion of the RD VS the SD decks? I was just given a 520H for free by a friend, and I've removed the WAY too heavy and difficult to work with 60" SD deck and want to get a smaller deck, most likely a 42". I've been asking online about the subject and some love the RD, others don't. Some say the RD will cause problems for the hydrostat fan on a 520H. Others say the RD is not good in high grass?
Hi! I favor your same opinion. This tractor was equipped with a 60" side discharge deck since it was new. They are great for large open areas, but the deck is very cumbersome to handle and maintenance. It's heavy! I think rear discharge decks are great. They take high grass, cut it down, and lay it on the same cut path. It looks nice, consistent, and you can mow around things on both the right or the left. The only disadvantage is they do make the rear of your tractor a little grassy / dirty. I do not think it will cause you any problems. Check your rear end / hydro pump area occasionally and blow out the fins. I cleaned this one and it had grass in the fins from operating the side discharge deck. It blows around it anyways. Once you try a smaller side discharge you won't want to go back. Thanks for watching! 👍😁
@@FlatThunder Cool. I think I'll go with the RD deck then. It'll keep the grass out of my womans flower beds. I've mainly mowed her yard area weekly with a RD push mower and my three acres of horse pasture that is bumpy, hilly, has a lot of obstacles to maneuver around with a Craftsman 42" rider, so the grass and weeds in the pasture get a foot tall sometimes before I get around to mowing it. The 60" deck is indeed a beast. So far, I haven't been able to find the OEM specs on it or its weight. According to one Wheelhorse chart I saw, the 36" deck weighs 100 lbs, and for each 6" increase in size, the weight goes up 30 lbs. So the 60" should weigh around 220 lbs. But according to a couple of members of the FB WheelHorse forum, it's more like 320!
@@dkeith45 you will have to watch the trailing wheels and the rear tire interface. Mine come very close when backing up on unlevel terrain. I believe the deck is around the 300 lb mark easily. You will like the rear discharge! Cheers
@@FlatThunder i have used all the decks you mentioned -- RD leaves nice look - two tips for RD users - attach a 2-3 inch rubber flap to back lip of mower deck that deflects the grass down -- and then at end of each cut use leaf blower to clean the tranny fins - the SD is great --but although we are all expected to use the safety chute on end of deck for safety reasons, you will get wider more distant dispersal of grass without the safety chute attached - the 60 inch is a monster for big flat areas but don't plan on taking it on and off frequently because so awkward -- but that invites neglect -- so grass will accumulate and risk rot and bad cutting efficiency -lastly, the best way to determine the proper PTO belt slack is about 1 inch of slack when you pull on the belt
@@williamrsteinhaus9666 great information and good ideas! Thank you for sharing and thanks for watching! 👍😁
What star do you live? I have a312-8 and 520 mowers and plows. Need help. Can t get neither started.
I live in Ohio. I bet you can do it! Check for spark first. If it has spark and it doesn't run it has to be fuel related; clean carb and check the lines/fuel pump. You got this! Thanks for watching 👍😁
my 520 runs like a tank, but the 42 rear discharge clogs on anything, and burns up my pto belt, any idea, seems my deck front is lower than the rear, also contemplating cutting out the baffles underneath,
I believe the deck should be adjusted so it is relatively level. The other conditions are hard to gage without seeing the exact scenario. Maybe you are buying too long of a belt and or not providing enough tension? Thanks for watching and best is luck on the repair! 👍😁
@@FlatThunder goter figured out a hook thingie with a adjusting bolt on the rear side of the deck, was off, hooked it in cuttin like you in your vid, now/
@@tc-nv8ig that's awesome! 👍😁
Would you be able to take pictures of the deck height adjuster? I have to replace one on the deck for my wheel horse and the diagram for the parts is kinda difficult to understand what goes where.
Sure no problem! I can send you some tonight. Please email me your address and or contact me on the channels Instagram / FB page. Glad to help. Thanks for watching! 👍😁
Sorry if I missed your correspondence. I didn't catch a message from you on FB/Instagram or on the channels email. I thought about it today since I fired up the tractor. Check out Instagram or FB. I posted pictures of it. I hope it's helpful. Cheers 😁
Maybe some of the best plain spoken, sensible translation of technical knowledge to user application I think I've ever heard also I think I would have pressure washed and degreased the deck before installing the new belt and doin' the Lock'nLube! Maybe enlighten me as to why you chose to install the belt first and then degrease, power wash? Yeah! Once she heats up that grease will start to flow into all the right spots.
Can't get over how heavy duty the snow blade arm set up is. I'm definitely interested in a set up like that but not sure I'll find that exact set u under a toadstool any time soon but at least I'll know what to look for and that's half the battle.
Mule drive and PTO is well explained and good video with some not too weird music. There is some weird music and a lot of videos.
That 520 is a tank! It looks like you're going into shock & awe mode with them dandelions not standing a chance against that well serviced machine.
Thanks for the great video
enjoyed it much!
Thanks! I'm glad you enjoyed the video. It's difficult to find the right balance to please the masses. Some enjoy the extended explanations and others complain I talk too much 🙄. Pressure washing before the new belt would be ideal....I think my pressure washer needed serviced when this video was taken. Thanks for watching and sharing! 👍😁
Hello Andy good video! Where are you located? State or city.
Hi Jay! Thanks, I appreciate your kind words. I live in a small town in Ohio. Thanks for watching 👍😁
Hi Andy, need another video on removing tire chains and wheels weights. 😂🇺🇸😂
Later 👍🇺🇸👍
@@rammanjr88 I like where you're going with that....I haven't had either off since the 90's. If they clear this different deck I might just leave them on. Haha 😂
For the adjusted blade steel billet what was the dimension on that
I never measured it, but Google indicates it's approximately 89". Toro Wheel Horse P/N 106125
I mean the pressure down bar
How do you get the belt on the mule deck? I cannot figure this out for the life of me
The lever / arm around the pto clutch disconnects and swings out away from the step pulley. Relieve belt tension using the knob on the front of the tractor, slip the belt over the step pulley, reinstall the engagement arm, tension belt and you should be good to go! Thanks for watching 👍😁
@@FlatThunder thank you so much!! I also had trouble getting the deck back on. But after about an hour i got that sucker on! Appreciate your video!
Wha belt? I need a a number
P/N: 106125 is the belt I replaced on the deck. Thanks for watching! 👍😁