How To Build A 1LB Spinner Battlebot Part Two!!! // Testing The Bot!!!
HTML-код
- Опубликовано: 20 авг 2024
- How to build a 1lb spinner battlebot part 2! In this video we will be finishing the battlebot that we stared last week in part one! Thanks for watching! Hope you enjoy! :D
This video contains affiliate links, which means that if you click on one of the product links and buy it, I'll receive a small commission.
Transmitter : amzn.to/2qc32V3
Spinner motor & ESC: amzn.to/2FR1uXC
Drive Motors: amzn.to/2DqIH6V
Drive Motor ESC: www.ebay.com/i...
Battery: amzn.to/2Dq8U5Q
Drive Wheels: amzn.to/2DNrq5A
Really cool bot, i am probably going to make a similar one myself😀buuut this thing is like the cheapest design i could find and its still like 150-200.- this is quite the pricey hobby😅
Very cool! I would recommend a bar over a blade or disc, with the amount of vertical spinners out there, an uppercut is very likely as you have a fairly slow drive. With a quicker drive you could steer out of trouble as 90% of winning is control.
This 2 part series came up when I searched for "how to build a battlebot" great content and delivery. I can see this channel grow way past 15K subs
Thank you so much! i'm glad you liked it! :D
Once you get the smaller nut, I would run it upside down so it is more like a undercutter and is harder for wedges to wedge you. You will also be able to undercut wheels way better.
very true! That how i'm hoping to drive it!
@@MechNinji How did you set up the servos as a drive train in your 150 gram version? Mine won't turn continuously to drive.
I'm using a Fs t6 transmitter
3 years? Don't matter, this is still sick nonetheless 🤙
This was really helpful. I started designing my own after I saw this vid.😀
I made a bot with a DC Motor, a huge clip, and a battery for the base of it. I used the DC Motor with a wedge shape piece to hit against the clip and shake. It shakes in a circle so it wouldnt stay in one place. The bot has a blade on the end of it to jam wheels, or cut or scratch if driven into. It’s basically a minibot that auto-pilots.
Im not 100% sure what you mean, but it sounds really cool!
Mechanical Ninjineer lol thanks!
Gonna try to make this and then strap an fpv cam to this bad boi
He can you show/tell how you connected everything, i never did the wiring for a battlebot before and it would help if i knew where the battery is connected to
I know this is like a year later, but I'm also having the same issue... Did you ever figure it out? if so can you please please please share your knowledge?
If you have a smaller blade, it rotates faster.
Also this is designed kind of like tombstone, I like it!!!
And finally, can you make other bots?
Thanks! I'm glad you like it! And yes, iv actually uploaded several different video about different battlebots! :)
I know the video is two years old, but if you combine the two forks on the top part of the chassis, it would be more rigid and might not break as easily.
Very true! Yeah, sadly I didnt do a very good job explaining my intentions in this video. At the time i had a LOT of peeps asking me to show them a guide on how to get started building a spinner combat robot. And so I put this video togeather. It was never ment to see actual combat, just ment to surve as a very rough guide on how to get started, and take your first steps. I had a lot of rando parts laying around and so in a few hours I slapped this togeather, just to have fun, and try to show that it doesnt have to be hard to get started. But sadly, even to this day, I get messages of people building this bot part for part which saddens me. In many ways I often feel like this video may have done more harm then good. :/
@@MechNinji I think it could be cool if you made another video showing what would actually happen in combat and why this was just a base to get started.
that is the reason why airplanes have round windows, that corner is built in weakness that is the reason why it brok there
can you make a vid of the same bot in a larger scale plz
RIP Chuck Wagon
hahaha!
willem - Heck yeah! ♬"No wheels on mah wagon, ♪An' I'm not rollin' along..."
Hey, you should make a video on how to setup the remote and transmitter you had purchased for your bot. We had purchased the same one and can’t quite get the correct setup.
cool this could be my start to building the RED DEVIL
I thoroughly enjoyed this. Thanks
First time tuning in in a while! And you grew a beard wow. Glad to be back!
oh wow! Well welcome back! Im glad to have you! :D
great vidio, but you didn't show the links
They should all be in the description
Can you go into more detail of how you sautered the escs to the motor and connecting the battery inputs?
Amazing job, man! Really great bot! :D
Thank you so much! Im glad you like it! :D
Hey which receiver did you use I saw that it was a spektrum but couldn’t make out the model
The one I used in this video was a spektrum dxe, However I don't recommend it. The Skyfly Fs I6 is a LOT cheaper and can do a LOT more in terms of robots. :)
Mechanical Ninjineer ah ok thank you so much
Hey it’s 2023 now can you make a new version with working links?
could you plz put the control board and controller with the transmitter and reciever. Plz I really want to make this bot
What do you mean? I only have a transmitter and receiver.
sorry i meant the link!
Sorry
WHAT DID YOU JUST SAY???
@Michanical ninjaneer so you did not use a circuit board at all? You just hooked up every single motor to the reciever?
Maybe with that extra weight, try using a 3530 motor as it has a 5mm shaft and won't explode first hit like that 2826.
Where to buy all the stuff
Your bot battled peanut butter and actually took some damage😆
You should drill out the blade except for the edges to save weight. You could also add more weight to the edges so that it hit's with more power. The blade weight is more efficiently used if it is on the dgees.
That sound like a good idea! Im just a little hesitant to drill into it because it is so easy to throw off the balance and weight of the blade.
That is true.
Just slap in the stuff inside not glueing it nothing and not managing anything just slap it in and it works perfect engineering
what are the dimensions of the motor housings???
Good bot
Thank you man thinking of getting my son in to it
You're welcome! I am so happy to hear that! :D
Dad is that you
Good Bro !!
Thanks! :D
Your definitely improving a lot with your designs. Just a few things, you give glue too much credit, most likely your chassis will shatter when hit with another spinner, also while the glue isn’t holding the blade it’s holding it centered and it could shift and cause the blade to become unbalanced. Also your motor is fine, the smaller you go the smaller the shaft your motor has which is important. And last thing, you have 50g to spare so protect your wheels because they micro gear motors are pretty brittle. But besides that great job!
Team Tanto Robotics Haha! Nah, the whole bot, glue and all is incredibly strong. Iv done quite exstisive strenght testing on it. And as for the blade as I explained in the video the glue only holds it until you bolt it down. Once properly bolted the blade won't move, not even if the glue wasn't there. And you can actually buy smaller outrunner motors with the same shaft thickness as this one has. However you are correct the motors shaft thickness does matter a lot, because the blade is only as strong as the motor it is bolted to is. :)
All the glue is for is holding the washers in place until the clamping force of the prop adapter can hole everything together with friction.
How I connect the gear motor to the brushed esc??
1:08 nice plugging battery animation.
haha! :D
It's one of those things that is just too randomly well done to comprehend :D
Hi,
Can i use a different battery because it doesnt ship to where i live
Also one more thing, can i use a different motor to make the weapon spin??
Want to make a 15kg version of it. Will need huge upgrades. From steel armour to bigger blade and powerful motors. Any 3D model available that might help us?
also. what did you use to attach the wheels to thr motor housings
A great thing you can use for that are hubs. There are alot of different versions however 3mm universal mounting hubs should work just fine for n20 motors ( the drive motors i used in this video) :)
Great video man
Thank you! :D
is it possible to switch saw to a spinner similair to the one tombstone had
Of course! You'll just need a bar! :)
"robot" :D did you mean an rc car with a saw
haha nope, I meant robot :)
:p
This is lots of fun! Your mini killer-bot looks great - I was wondering about the durability of the paint finish, though. As you've used transparent lexan for the bodywork, would spraying the inside surfaces have given better protection? You'd have got a custom car 'deep lacquer effect' for free. ;-) Of course you'll have had good reasons for finishing it the way you have, I'd just hate to see that lovely purple-orange [purange? orrple?] scratched. It deserves to survive - purange is way too cool for combat!
Amazing! Thank you!✋😊
What is the speed of A2212 brushless motor, 1000KV or 2200KV?
Childhood videos of tombstone
I got all the components but I need help Right now, please, I have a competence.
I don't know how to connect the ESC brushless (red ones) to the battery and the motor.
And all the components to the battery.
Please help.
I actually just put out a video about ESCs :) ruclips.net/video/38LL_vHCpn8/видео.html
If I was going against it I would go for the flashing light in the back I think it's connected to the controller
well yeah, Everything is connected to the controller.
This is so cool!!!
Thank you!
ik it been like 4 years but is there any way you could send new links some of the old ones do not work
can a 7.4V lipo battery supply a 3 dc motor w/ esc. that has total weight of 3kg(including chassis and other stuff in my battlebot) ? thanks for the reply
I wanna build a robot, but I'm always wondering about the remote that controls the robot. How do you get one of these?
this is the one I use and it works great! :D this is an affiliate link amzn.to/2qc32V3
Is it remote controled robot?
Those batteries and radio transmitters are expensive. Are there any cheap substitutes I can use?
keep this vid up also last one
You could improve on the blade design... simply cut off ALL the teeth except 4, making sure the remaining ones are evenly spaced. this will increase the contact points of the blade with your opponents.
I would just use a different blade. Its not usually a good idea to start cutting parts of the blade off because it becomes very hard to keep it balanced
thank you
you're welcome! :D
I love this tutorial it’s one of the better one’s on youtube, but i had two questions
How does the robot go left and right because it has no servo’s and what channels on your receiver do you use for the blade and the motors?
No, i don't use any servos in this bot however i do have two geared dc drive motors (N20s) That I use. They work great you just of course have to run them through ESCs. Servos typically aren't used for drive motors in anything larger then 150 gram bots because they aren't really built too well for it.
As for channels, it will depend on your setup, but i use 1 and 2 (mixed) for drive and 3 for weapon. :)
Ty i am going to build this one myself. Kust need a cheap rc tranmitter and reciever and rhen i'm all set
How u conected the weapon esc into the batery ?
Go lil dude
haha!
can i use 3s 11.1v battery on 2 brushed drive esc 4-8v?
It seems like the drive motor ESC link is broken. Could you recommend another one?
www.ebay.com/itm/RC-ESC-20A-Brush-Motor-Speed-Controller-w-Brake-for-RC-Car-Boat-Tank/332357822669?hash=item4d6211e8cd:g:6PEAAOSwSypY9yNN i found it on ebay and it was the exact same name as the old one, just a different listing
Hello! I know im kinda late since this video was uploaded in 2018 but I want to make my first battlebot this summer. I was just wondering how much it would cost to make the bot you made in this video?
Hey man! What type of control did you use? Also, where can I find it? I plan on building this bot, but not for fighting sense it’s my first one I’m actually building from scratch. Thanks in advance!
How exactly did you wire the esc's i have the same esc and confused on how/what wires to solder onto motor and to connect to battery.
I actually have a video about that! :D ruclips.net/video/cGtsXMkWMSo/видео.html
How did u attach the battery
AND! How many different main batteries will I need? How long does just one battery last?
The Robot will only need one battery in it at a time, however you will want spares. As for how long it lasts that depends on what kind and size of motors you're using and what size battery. For me, the battery i used lasted about 4 or 5mins on a single charge in my bot. :)
Part 1 ??
any chance updated link for Drive Motor ESC :3
Can you please share the code?
How did u conected 2 ESCs into a batery ?
im making this bot as a project, is their anyway to hace the blae in a different postion? Low instead of high?
You're asking if there's a way to mount the blade lower? No, not really. However you could mount the motor upside-down which in turn would make the blade alot lower. That is probably your best bet OR you could make a vertical spinner. :)
Hey I’m very late to this video but what did you use to bolt the blade down
3:59 broke a piece of the frame off. Defeated by a peanut butter jar lol
Please provide circuit diagram
Sweet
How are you controlling it
?
How did you fit the battery in there, it looked so crammed even without it
It was snug but it actually wasn't too tight once I put the smaller esc's in the corner. :)
how do you do to plug the 2 esc
plz im cant now
Where exactly to do u connect the gear motors to the esc wires
Where do u solder it to
Im so sorry, im not sure if I understand the question... But the brushed motor will have two leads that you'll solder to the two output leads of your brushed ESC. Does that help?
Mechanical Ninjineer thanks that helps
I Like It! :)
Thanks! I'm glad to hear it!
4 of these links are unavailable😢
Hey a built a bot just like this thanks, I'm having an issue with the bolt staying on the motor for the spinner. Do you have thoughts?
Hey man, I’m building this bot too. Is it the little cap piece that slides onto the brushless motor that’s sliding off?
what do you use for a receiver
Cool man
Thanks!
You have ready robot? In running condition.
Yes, I actually have a few bots in finished condition! :)
Can you give the link to the transmitter/receiver you used
This is an affiliate link but here it is! :D Transmitter : amzn.to/2qc32V3
U just gave an idea on parts for sojourner Rover
Thats awesome! Best of luck on the build!
could i get away with using a cheaper transmitter? could i take one out of an old RC car?
I want to make one of these
Awesome! Im happy to hear that! :D
Hey what did you use for the recievers?
where do you plug in your esc´s
I have a question will it work if I use four motors and a weapon and in use four speed controllers instead of 2 with a five channel receiver and use the fifth slot for the weapon motor. Thanks for any help
Yes, that is possible! However you can actually get away with 3 ESCs and a 3 channel receiver. Two ESCs, for the 4 drive motors, and 1 ESC for the weapon motor (assuming you're not using a servo, because a serve doesn't need an ESC). Give me a sec and i'll drop a link to 2 of my videos that should help! :)
ruclips.net/video/38LL_vHCpn8/видео.html
ruclips.net/video/8JftijCIQ-E/видео.html
what type of receiver is it?
The link to eBay doesn’t work can someone tell me how to get it
Could you please put the link on how to make the controller? Cause i really want to make this bot
I just use the "sky fly Fs I6" transmitter. It only cost about $50 AND that includes the receiver! I love mine! :D
where can i get a receiver that responds to a remote control? do i tear apart any ol' useless rc car and get a receiver there?
You're trying to get a toy grade transmitter to talk to a toy grade receiver? Well they will have to be the same frequancy. Or you could just buy a hobby grade trans and reciever for $45. Heres a link for the one that i use. This is an affilate link Transmitter : amzn.to/2qc32V3
This should be named tiny tombstone I can’t be the only one that notices the similarities
how how to control it via rc?
How many Volt have the receiver?