meh i ran 10 speed with 60 series detroit running flatbeds at 80k lbs and then ran 13 speed zero advantage for 13 speed except splitting on mountain makes you lose less momentum as you dont have to drop a full gear but very small advantage maybe if you talking about heavy hauling but i dont know. i never ran over 80k lbs
@@zaidchalabi1599 Depends on what the 13 speed is hooked too I guess. The cummins isx that I'm running is got the 13 speed backing it. And I can pull fancy gap at 55mph with a full load
you've definitely gotta be the owner of that truck, to much care and finesse in those shifts and back on the throttle. lol I'm the same way with my Pete haha 99 Pete 379 6nz cat 18 speed, stay safe sir great video, you earned a subscriber
Thank you sir! I don’t take that compliment lightly! I don’t get much time in them now a days, but I sure enjoy every minute! You have the power plant I’m needing to go in my 96 379 that’s sitting!!😬😬😬 Keep on trucking and be safe!!
@@Sy-Con yes sir it's definitely been a beast since iv owned it, it's got a marine Cam and Pittsburg power injectors and fuel pump and a Pittsburg power box in the cab, all I do is haul coal locally with it now, I used to run it over the road pulling my 39ft spread axle dump bucket but with freight rates dwindling it just wasn't worth it anymore so I stay round home now haha, but you be safe to sir and have a great weekend.
@@CoalMiner379 sounds like you’ve been in the game long enough to know what’s going on! Couldn’t agree with you more! If more rubber on the asphalt don’t show more green at the end of the month, it just ain’t worth it. 🤷🏼♂️
@Diesel_Shorts i really like the Pittsburgh power box I have on my Peterbilt 379 with the 6nz cat, my cat does have the marine cat cam and marine Pittsburgh power injectors amd those back by the power box really made a huge difference in my pulling and top end response, of course you can start sucking down the fuel with it if you really get into it, but if your normal driving and get used to the way it's running you can get really good mileage out of it. Even being loaded I can honestly say that I can average 7 to 8 mpg but not all the time but I can average it, but that's because it's not starving for fuel or air of course, but I do not regret buying any of it, I honestly bought it all with getting better mileage in mind but it is nice to be able to drop a gear and mash on it to get around traffic or get on up a hill and not lose it all by not passing governed trucks or slower vehicles. I really recommend a owner operator trying out a Pittsburgh power box if you get the chance, iv let several of my buddy's that are owner operators drive my truck to see what I difference there is in the settings of it, my box has a 1-6 twist know on it with 6 being the highest setting of course. And I'll say to on the highest setting in a hard pull you definitely need to be mindful of the pyrometer if you have one or I recommend installing one.
I miss driving big trucks, started out w/a 83 Pete conventional, 13 speed fueler transmission. I/we logged up the north shore my dad & I, what a good life, breakfast, lunch, dinner in the woods. Get up & do it all over again.
Our first dump truck here was a 1999 Mack RD triaxle. She did us a splendid job for 3 years. She’s still in the road here locally. Kinda mad we sold it now…😅
If you watch this and want to float shift one and aren’t familiar with it, for God sake don’t put much tension on the shifter. Let your fingers be like the spring that is holding tension against it lightly instead of the palm of your hand! Keep in mind that all that length of the shift lever amplifies your pressure immensely and synchronizers and blocker rings aren’t unbreakable
The shift pattern is SO simple. I genuinely wish that instead of the complicated "splits" they just extended the pattern to the right or made you run it through the pattern again for the transmissions with more gears. A true 15-speed that you run through THIS pattern 3 times could likely replace an 18-speed and would be much nicer to drive. Likewise, a 12-speed that's just this pattern with an extra shift per layer could take over for both 10s and 13s. Then there'd only be two or three transmission types and they'd all be equally nice to drive. 10 speed low/hi, 12 speed low/hi, 15 speed low/med/high.
Rico, we have been there! This company started with a single axle that I only drove! 😂 Then to an RD Mack that was on the road for three years and she’s about the ugliest thing you’ve ever seen. But by god she was always back on the road every day and never hardly let me down! As long as it’s making you a living sir, it don’t matter what it sounds or looks like! As long as the job gets done! Stay safe driver!!😎
eaton fuller 10 speed rtlo with 1650 tq great transmission got 1.2 mill on mine and still shift perfectly run flatbed almost always 75k-80k lbs and never needed 13 speed transmission. 10 speed is perfect
@@zaidchalabi1599 13 speed will get you better mileage and you can drive it like a 10 if your not hauling close to 80k. So if your a reefer driver like you most likely are, a 13 speed is gonna be more effiecent in the long run. Not to mention if you have a smaller litre engine then a 13 speed is definitely gonna get you better mileage and your motor will have less strain when your going up a hill when you can split your gears in that sweet spot.
Stick with it, you will get it, and the clutch will only be starting out or stopped at a light or something, it will be second nature to you, you will learn the sound of the engine without even looking at the tack , it's just like breathing.
@@billbyxbe2408 you can still down shift while floating gears, my CDL instructor showed us the technic and it was the same way. Listen to the engine, give the engine gas float to the lower gear and the lower gear will slow the engine down, when the engine gets slow enough gas the engine and float down a gear till you hit 1st gear and then use clutch to stop at a 🛑. I’m sure I’ll be able to do this much later but not right now. Lol
I miss doing this when i was a smooth bore food grade tanker..... 😢😢😢 never used the clutch b/c we were always heavy, unless we were empty..... only time you use the clutch was to stop and go
beautiful shifting. what a lotta people don't know is you can float gears on basically any manual trans, I do it on my sports cars all the time when I'm feeling lazy. I love clicking off up and down shifts on my bikes with no clutch too, since they've got dog engagement you just chop or blip the throttle and it clacks right in
@@joen2418 not with that attitude! haha no but really it's just what it's called, floating gears or slip shifting, when you shift with no clutch by matching rpm's.
I can tell by looking at your hands that your not that old but you shift like an old timer. Great job your boss should be thankful that his truck isn’t being abused.
One of the coolest comments/compliments I’ve had on here so far! Although it’s not always fun, my wife and I happen to be the owners. After a few hefty maintance invoices, you show everyone the least harsh way to drive a truck. Not saying the way I did it was perfect, but hopefully helps them! Keep safe out there! And thanks for the comment!
@@Sy-Con man I’ve driven many Pete’s in my 25 years behind the wheel and not one of em had a cup holder! It was the first thing I noticed LOL. Cheers from northern Ontario Canada
That's sounds more like a n14cummins than a cat or a m11 cummins doesn't sound like that u ain't got no 3406 cat will go to talking bout 18-2000 u got a old turd under the hood
For all the nay sayers and the negative comments about my foot work… made one just for y’all!
ruclips.net/user/shortsEqsoCOmarXI?si=dAqqg0L9zCD-Ive-
Love those 10 speeds, almost mistake proof.
10a are mistake prone due to the fact you have to break the wall to go into higher forward speeds . It's a really stupid setup.
@@chucktaylor1982 what??? You only obviously dont realize 1st is still a gear whether you use it or not? Lol
I thought the same thing until I got in a 18 speed it's so much better its not even close in my opinion
@@truthhurts95 I can’t wait to get in an 18 speed and learn that.. been trucking for a while but my company only uses 10’speeds
@William G it's different at first because of the shift pattern but as long as you can remember that H pattern you'll be fine
10 speeds are good with lighter loads or a big motor and hefty trans. My opinion either 13 or 18 speeds are nice
I agree completely! This is a dump truck. 8LL or 10 speed. Out on the road everyday, can’t run with out that 13 or 18.😅🤷🏼♂️
@@Sy-Con yea makes sense
My 8 speed over with deep is even better.
meh
i ran 10 speed with 60 series detroit running flatbeds at 80k lbs and then ran 13 speed
zero advantage for 13 speed except splitting on mountain makes you lose less momentum as you dont have to drop a full gear
but very small advantage
maybe if you talking about heavy hauling but i dont know. i never ran over 80k lbs
@@zaidchalabi1599 Depends on what the 13 speed is hooked too I guess. The cummins isx that I'm running is got the 13 speed backing it. And I can pull fancy gap at 55mph with a full load
Handles it like an old time G great sound going through the gears
You ate so kind to that motor, gear box, and every crossmember. This is truly the way to operate a heavy truck. B
The VTEC kicks in through every gear, sweet!
VTEC? That’s a honda thing
Seasoned trucker. ❤
Please did someone could give an estimated FUEL ⛽ consumption /100km for this type of Truck ?
🙏 Thanks
you've definitely gotta be the owner of that truck, to much care and finesse in those shifts and back on the throttle. lol I'm the same way with my Pete haha 99 Pete 379 6nz cat 18 speed, stay safe sir great video, you earned a subscriber
Thank you sir! I don’t take that compliment lightly!
I don’t get much time in them now a days, but I sure enjoy every minute!
You have the power plant I’m needing to go in my 96 379 that’s sitting!!😬😬😬
Keep on trucking and be safe!!
@@Sy-Con yes sir it's definitely been a beast since iv owned it, it's got a marine Cam and Pittsburg power injectors and fuel pump and a Pittsburg power box in the cab, all I do is haul coal locally with it now, I used to run it over the road pulling my 39ft spread axle dump bucket but with freight rates dwindling it just wasn't worth it anymore so I stay round home now haha, but you be safe to sir and have a great weekend.
@@CoalMiner379 sounds like you’ve been in the game long enough to know what’s going on! Couldn’t agree with you more! If more rubber on the asphalt don’t show more green at the end of the month, it just ain’t worth it. 🤷🏼♂️
@@CoalMiner379how do u like that power box? Heard they put out power when turned up
@Diesel_Shorts i really like the Pittsburgh power box I have on my Peterbilt 379 with the 6nz cat, my cat does have the marine cat cam and marine Pittsburgh power injectors amd those back by the power box really made a huge difference in my pulling and top end response, of course you can start sucking down the fuel with it if you really get into it, but if your normal driving and get used to the way it's running you can get really good mileage out of it. Even being loaded I can honestly say that I can average 7 to 8 mpg but not all the time but I can average it, but that's because it's not starving for fuel or air of course, but I do not regret buying any of it, I honestly bought it all with getting better mileage in mind but it is nice to be able to drop a gear and mash on it to get around traffic or get on up a hill and not lose it all by not passing governed trucks or slower vehicles. I really recommend a owner operator trying out a Pittsburgh power box if you get the chance, iv let several of my buddy's that are owner operators drive my truck to see what I difference there is in the settings of it, my box has a 1-6 twist know on it with 6 being the highest setting of course. And I'll say to on the highest setting in a hard pull you definitely need to be mindful of the pyrometer if you have one or I recommend installing one.
❤ the sound of the turbo it's so relaxing
Gotta great sound of the HAMMER going DOWN. Have a great week
Good old eaton - fuller 10 speed manual transmission 👍...
Been-there-done-that!! Wishing I could do it again..
Shifting looks like mine smooth lol but the best part of video is the sound! Wish mine sounded like that nothing but exhaust and turbo!!! 👍👍
Not all of us have this luxury 😂😂
I miss driving big trucks, started out w/a 83 Pete conventional, 13 speed fueler transmission.
I/we logged up the north shore my dad & I, what a good life, breakfast, lunch, dinner in the woods.
Get up & do it all over again.
Fucking gear Jammin, LOVE IT.
Can't find em, grind em! C'mon Back!
Sounds like a damned old Cummins in there
It’s a C 12 brother! 👊
The 3 pops of the Jake 🤭
😎
Very satisfying
Awesome..love the 10
U r awesome 👍
I remember decades ago as a kid,my dad had one in a B-65 Mack hooked up to 220 Cummins
Our first dump truck here was a 1999 Mack RD triaxle. She did us a splendid job for 3 years. She’s still in the road here locally. Kinda mad we sold it now…😅
Guess you haven’t seen my 82 speed Volvo big boy?? She shifts like a dream 💭…
That Jake between 3rd and 4th tho 🤘🏼🫡
Love the 10spd
If you watch this and want to float shift one and aren’t familiar with it, for God sake don’t put much tension on the shifter. Let your fingers be like the spring that is holding tension against it lightly instead of the palm of your hand! Keep in mind that all that length of the shift lever amplifies your pressure immensely and synchronizers and blocker rings aren’t unbreakable
Oh my 10 speed, the best. Had one in my Mack
Probably taught the same way I was. Take the lid off that cup put it on the dash and go through the gears
Love this.. do a down shift please
Great idea!!
The shift pattern is SO simple. I genuinely wish that instead of the complicated "splits" they just extended the pattern to the right or made you run it through the pattern again for the transmissions with more gears.
A true 15-speed that you run through THIS pattern 3 times could likely replace an 18-speed and would be much nicer to drive. Likewise, a 12-speed that's just this pattern with an extra shift per layer could take over for both 10s and 13s.
Then there'd only be two or three transmission types and they'd all be equally nice to drive. 10 speed low/hi, 12 speed low/hi, 15 speed low/med/high.
Eaton Fuller 💪💪
10 speeds are awesome for someone who struggles to remember shift patterns i prefer a 13 to 18 speed myself
Volvo super 10. With the switch on the thumb. You did not have to touch the clutch just need to listen to the engine and switch down 👍🤣
First of all, I don’t know too many drivers that start a low gear you’re either a new driver. Well, you know what I’m thinking if you ain’t.😂😂
Depends on how loaded, how flat, and how soft the surface
Listening for ages ❤❤❤
THAT TRUCK SOUNDS SOOO GOOD. I MISS THE OLD DIESELS. SOUNDS LIKE A 3406 CAT
Close sir! C12! 😎👊
Wish my 10speed shifted and sounded that nice. 01 Mack CH totally gutless but she goes down the road pretty decent for 1.5mill
Rico, we have been there!
This company started with a single axle that I only drove! 😂
Then to an RD Mack that was on the road for three years and she’s about the ugliest thing you’ve ever seen. But by god she was always back on the road every day and never hardly let me down! As long as it’s making you a living sir, it don’t matter what it sounds or looks like! As long as the job gets done! Stay safe driver!!😎
Don't think there's much bad about the CL or CH personally. For a old truck they can still hold there own. But the R700 was the boy in it's days...
I had a 425 cat with 4×4 16 speed in a 1965 Diamond T .PULLING A GRAIN TRAILER TO HOUSTON SHIP YARD FOR YEARS ! THANKS FOR THE MEMORIES !
A cat and a road ranger go so well together
NOTHING TO IT BUT TO DO IT!
Nicely done
A 10 speed and a round dash... that poor Peterbilt.
😂😂
Fuck this should have been titled the sick turbo diesel sound! 👍😱
eaton fuller 10 speed rtlo with 1650 tq
great transmission
got 1.2 mill on mine and still shift perfectly
run flatbed almost always 75k-80k lbs and never needed 13 speed transmission.
10 speed is perfect
try hauling 105,500 with a 10 speed 😬
@@YourLocalShooter thats dumb comment
95% of trucks run under 80k lbs
Why would one comment about other 5%
Its different ball game
@@zaidchalabi1599 13 speed will get you better mileage and you can drive it like a 10 if your not hauling close to 80k. So if your a reefer driver like you most likely are, a 13 speed is gonna be more effiecent in the long run. Not to mention if you have a smaller litre engine then a 13 speed is definitely gonna get you better mileage and your motor will have less strain when your going up a hill when you can split your gears in that sweet spot.
Proper pressure on the stick is shown with two fingers inserting into sincrinizer.
WOW😮
Absolutely love me the eatons
So cool
I love the grunt Jake made from 3rd to 4th 😊
😬😅
Sounds good
That jake snort was mint
Ikr
What a sound ❤
Nice my friend 👍
Nice 👊🏻💯
Didn't know 10-speeds had whistles ha. Smooth.
Meanwhile I'm cursing when something forces me to stop and shift trough the 4 gears on my van, this guy is churning butter in the center console
Hell yes .. pete power❤❤❤
Smooth bro
HERMOSO EL PETERBILT
I love that snort from 3rd to 4th idk why it just sounds amazing
The Jake brake?
@@jettalanis6264 yes
I heard that grind
Not shabby for a guy that doesn’t drive 2 or 3 times a year…🤷🏼♂️😂
😅Awesome job 💯 👍
I've always floated the gears. Transmissions in big trucks aren't synchronized. Saves a lot of clutching.
Thomas Dutkiewicz
As long as the rev is in the right place floating is no problem:-). I’m no where to mastering it, I still use my clutch…lol
Stick with it, you will get it, and the clutch will only be starting out or stopped at a light or something, it will be second nature to you, you will learn the sound of the engine without even looking at the tack , it's just like breathing.
Don't let anyone lie to you that doesn't use it in the right application! Keep after it!
When are you going to down shift.
@@billbyxbe2408 you can still down shift while floating gears, my CDL instructor showed us the technic and it was the same way. Listen to the engine, give the engine gas float to the lower gear and the lower gear will slow the engine down, when the engine gets slow enough gas the engine and float down a gear till you hit 1st gear and then use clutch to stop at a 🛑. I’m sure I’ll be able to do this much later but not right now. Lol
What's a Clutch???😂😂😂
Nothing like the sound. Of the Hammer going DOWN
Relics of a golden age
It's what I've city drove in my CDL training school, manual driving all day baby whooooo doooogie 🤙🏾
I did a job with this kind of gear box. It's a Peterbilt truck. Here it's named 11-10 gear box.
Oh, that satisfies
Got my ten in the wind
10 speed great shifting!!
I miss doing this when i was a smooth bore food grade tanker..... 😢😢😢 never used the clutch b/c we were always heavy, unless we were empty..... only time you use the clutch was to stop and go
I love those hands
Nice
beautiful shifting. what a lotta people don't know is you can float gears on basically any manual trans, I do it on my sports cars all the time when I'm feeling lazy. I love clicking off up and down shifts on my bikes with no clutch too, since they've got dog engagement you just chop or blip the throttle and it clacks right in
Gears are stationary objects that rotate
Never do they leave the chat and float
@@joen2418 not with that attitude! haha no but really it's just what it's called, floating gears or slip shifting, when you shift with no clutch by matching rpm's.
I want a 13, or 18. I hate the 10 pulling hills.
Que linda la Fuller!!
The good old days!!!
Wow
Damn that's a long truck 😅
Shovel 😮
I can tell by looking at your hands that your not that old but you shift like an old timer. Great job your boss should be thankful that his truck isn’t being abused.
One of the coolest comments/compliments I’ve had on here so far! Although it’s not always fun, my wife and I happen to be the owners. After a few hefty maintance invoices, you show everyone the least harsh way to drive a truck. Not saying the way I did it was perfect, but hopefully helps them!
Keep safe out there! And thanks for the comment!
Yes, split up the gear..the engine sound it's amazing.. 💖💖💖
Holy shit! A cup holder!
I laughed ridiculously to hard at this comment! 😂
@@Sy-Con man I’ve driven many Pete’s in my 25 years behind the wheel and not one of em had a cup holder! It was the first thing I noticed LOL. Cheers from northern Ontario Canada
Now for all u young bucks out there, listen to the turbo, it tells you when she's ready to go in gear
From 5th to 6th .... thats a labyrinth 😅😮😊
👍
Good Sr you good 👍 ❤
Rowin' on down
the road
Круто!!!!!!
Nothing shifts as good as a cat with a road ranger behind it loved driving my ih 9300 with the 425 and 15od on some 391 gears
That's sounds more like a n14cummins than a cat or a m11 cummins doesn't sound like that u ain't got no 3406 cat will go to talking bout 18-2000 u got a old turd under the hood
ain't no super gear shifter slammer yet son.. keep practicing!!
Shoot ol son, we don’t post thos on the RUclips’s!😎😅 stay safe driver!
Аетон 10ка👍👍👍
OH MAN I LOVED ME 10SPEED FREIGHTLINER😎...But no more taking off in 6th gear from the light...now I have to take in 2nd and go through every gear😪
Came out of a 10spd and got in an 8LL. I’ll never go back to a 10!
Man i miss floating through gears
I always liked the 18speed since I did heavy haul
Mind blowing
I always start out in 4th.
👏