2006-2022 RWD Charger SR Performance Lowering Springs Review & Install
HTML-код
- Опубликовано: 30 июн 2024
- SR Performance's Lowering Springs are an excellent way to improve the handling performance of your Charger. These Springs will lower your Charger's center of gravity, which will reduce squat during acceleration, body roll in the corners, and excessive nose-dive under hard braking. SR Performance Springs are perfectly suited for daily driving, street, and occasional track applications.
Aggressive Muscle Car Stance. Not only does a set of SR Performance Springs improve the handling performance of your Charger, but they also improve its overall appearance by lowering the ride height approximately 2.0-inches front and 2.1-inches rear eliminating that huge tire to fender gap, for a more aggressive street stance.
Progressive Design. Progressive springs (also known as variable rate springs) are designed to be more compliant when riding over rough and uneven surfaces like public roads. Progressive springs are engineered with a low starting spring rate that increases as the spring compresses. Variable rate compression allows for a smoother ride, while still providing good handling characteristics when pushed hard. This makes progressive rate springs a popular choice for daily street driven Chargers.
Clears Stock and Aftermarket Wheels & Tires. These lowering springs were engineered to be compatible with your factory size wheels and tires, as well as AmericanMuscle's pre-configured wheel and tire combo kits (specific to your generation), to assure proper clearance with no rubbing issues.
Professional Installation Recommended. Seeing that a spring compressor is required for installation of these Coil Springs, AmericanMuscle recommends professional installation. With the proper tools, installation can be completed in about three hours. Please note that an alignment is highly recommended after installation.
Application. This set of four SR Performance Lowering Springs are specifically designed for use on 2006-2022 RWD Chargers equipped with independent rear suspension (IRS). Does not fit SRT models. muscle.am/3M1fsaA
0:00 - Review
3:41 - Tools Needed
4:16 - Install
Item CR4746
----------------------------------------------------------------
Follow AmericanMuscle for all the latest Challenger and Charger Content:
Subscribe for Daily Mopar Videos: muscle.am/2TXrfwf
Instagram: / americanmusclechallenger
FaceBook: / americanmusclechallenger
AmericanMuscle.com has the best aftermarket parts for your Dodge Challenger or Charger: muscle.am/2ztDN5R 
Авто/Мото
![Megan Thee Stallion - Otaku Hot Girl [Official Audio]](http://i.ytimg.com/vi/USxIYOaIpig/mqdefault.jpg)
Shop these Charger SR Performance Lowering Springs! : muscle.am/3M1fsaA
I need to know which springs will fit AWD 5.7 Charger pursuits. Also, looking for a softer ride. Suggestions?
Super helpful honesty thank yall
Will these work on a 07 Chrysler 300C I bought a set for my Charger RT but started having engine problems so I sold it
Do you think this would be the exact same for a 23’ rt? I see some slight differences for the exhaust
what’s that socket called? i looked at every store and they don’t know either
No camber kit needed?
Are these an upgrade from the ones that come on an scatpack?
Do i need other hardware?
What can happen. If you Install the springs with the srunchy part on the bottom instead of the top
You can't
It’s just a dust cover. May prolong the life of strut
Anyone got the torque specs
Does it fit to AWD Charger SXT?
These SR Performance Lowering Springs will not fit AWD Chargers. -Zach
@@AmericanMuscleDodge Can i buy some lowering springs for AWD? :(
Can you put these on a scatpack?
Yes
Ok so where was the lowering done at , cause it never happened
They show it like 1 minute into the video. Should have shown again at the end though since i bet you skipped to the end.