What should we match this up with as a topper? I was thinking that after 48 hours that I would top it with TW seal and shine, but is there something similar that is better? I know TW seal and shine didn't have these gloss numbers. Is the gloss going to drop if I top this with S&S?
Brian, You know all about C5's. Planning to use 3D One on a Uro-fiber 50/50 or Lake Country purple foamed wool pad to remove light swirls. Follow up with Xtreme Solutions LVR403 Foam Pad Polishing Glaze. Can I then top with TAC systems Shinee spray wax or Xtreme Solutions Poly-Seal for the ultimate gloss for car shows? Learning so much from you. Keep up the good work and Merry Christmas from Kansas.
I dont do this alot but I went ahead and purchased a quart of the lvr 403 so I can try it out as you peaked my interest! I really hope I get the same results as you! Thanks for the video!
deepsquat600 I stayed at a holiday inn...... its actually made by m and m chemicals (maybe wrong name it starts with a M) of Denver Colorado they are one of top chemical manufacturers that formulate base detailing product then company buy base stock or have custom formulation of there base products puris is there own brand they created. Extreme solutions use this company the large manufacturer and some puris products. I assume they have them do custom formula or have additives to base materials Puris is an offshoot or division of the M and M company it is not part of extreme solutions
@@PeteyMcSavage I believe it's B&B Blending, check thier website, you'll find the whole Jade line (Puris), Detail King carries the Jade line as well. I beieve B&B bought Puris, which was a European company.
This video just answered my question I asked you earlier today. thanks bud. This is exactly what I am looking for. Something that will fill, and something a ceramic coating will adhere to
Come on Brian. What detailer (professional like you or newbie like me) doesn't want EVERY new product that gives great results. Thanks for the discount!! Love the channel. Off to Amazon 😊
There are so many options! Would love to see a video where you provide your first pick series of products from cleaning to base coat to ceramic to wax and topper. Especially first preference (or ties) for people without garages, as well as confirmation that the products are available. A few things seem to be out of stock on the xtreme site. I have a black lexus I plan to drive for 5 years, but no garage. I 'd love to really take my time one weekend soon and just spend a couple days doing a really thorough clean and then layer a few things. Plan to start with a good polish and decontamination and then ceramic base coat or two. Have the adams car wash, have the citrol and goof off pro. planning on a couple coats of clean and shine and then would like to do one more type of thing on top of that if it's advised, and then do the 'secret sauce' stack to finish, except the LVR367 magnum wax is out of stock, so was hoping to use their topper for that step instead. Just not sure if it will get the same results or if there is a different substitute. Have watched close to a dozen Apex videos, love how clear everything is, have learned a lot!
Hi Guys, team Autobright here. I must thank Aaron of Xtreme Solutions for guiding UK customers to ourselves for this product available from our website autobright.co.uk under our brand name - Final Finish. I have been using this product for many years as a final stage to boost the gloss and it really enhances your final finish. Loving the video Apex Detail
You sold me on this one, plus who can resist a coupon code?? 😀 I think this will be great on my wife's Jeep, it's a bit darker and hopefully this will help fill some of the little flaws.
Is this not a Glaze will fillers in it? Personally I'd be a bit wary dropping $330 worth of coating on top of an 'acrylic glaze' until it's long term viability has been proven. Will the glaze affect any of the limited swirl-reduction capabilities if Zipang?
I have just subscribed to your channel. Direct instructions and information and no silly antics or music. I have 2 questions. Do you still like/recommend Meguiar's synthetic sealant? I am getting ready to ceramic coat (Avalon King) a friends car. What polish would you use to remove swirls and scratches? I knooowwww there are tons out there. Thank you
Just ordered the Sucker Jr as a Christmas gift to myself. Nice to see how products work before I shell out social security dollars on a hobby car. Thanks for your research, testing and evaluation.
great video and product review good friend. looks like a homerun.VERY well priced. so it's basically polishing glaze?would u recommend using rotary or da?b well good friend
Learned a lot from you! But I have info overload! LOL. Would love some suggestions or video on how to maintain a brand new pearl white car, like a 2020 Subaru Outback with the plastic trim. Something your college graduate daughter could do (hint). Thank you!
Brian, would you still do a IP wipe with this product or ones meant to be a base or “primer polish” before applying a coating? If so at what point before or after cure? Thanks you are the goat.
Great stuff Brian. Only down side is keeping a vehicle down for 48 hrs. To clarify, you are saying wait to put protection on top or it can not be used in the climates or be outside?
I think you would be fine to add protection right after. No other polish or glaze I’ve seen makes you wait to add protection. I just ordered some and just going to layer it right after
Kris Hi, sorry, just saw this. The LVR2 is great for getting out deeper scratches, and I really like the dynamic cut compound as it gets out lots of scratches and it’s very easy to remove with no dust. Then follow up with their ICE FTW! 😊
Finally. First thumbs up. And wow. Letting someone else run the DA. Brave man. I always took you for being like my personality type, the one that just needs to do it myself if I'm going to have it done right. Haha One of my handicaps. I've never seen the gloss meter start so low. Wow now that's some gloss. Sheesh. Amazing. Would this be a good one to use as a polish to finish with after using 3D One? My 3D One is doing great on our vehicles. Loving it. Got almost all scratches out of our white Honda Odyssey. But I need to really over pop it since it's white.
The other guy is Dan, he's been in a few of Brian's videos, Brian will tell you other than his son and Sissy, Dan is the only he will allow past the shop doors. Yeah Dan is good.
At 4:22 you switched to a yellow pad on the Honda, was that Rupes Yellow? It looked soft as you rolled over the edges on the hood. Product looks to do an excellent job on restoring the gloss and turning clear as you polish is helpful.
Brian, will 403 work to correct minor imperfections on a coating like Essence+ or will it remove the coating? I have the good fortune of living 15 minutes from Extreme Solutions in south jersey. The guys there are great!
Brian...I’m looking to buy a gallon of either power clean or carpro multi-x as per your recommendation for a pre-treat for soiled exteriors. I want something that is effective on the whole exterior including glass & plastic trim. I saw I can buy a gallon of power clean for $35 where as multi-x is around $85. Is multi-x really worth the extra money over power clean?
Excellent product. Is this similar to Car Pro Essence it how it works or is it completely different??? We have single stage paint so would suit them I imagine.
I love the performance of the product but have only white cars. Will this product work on lighter color paint as well? If not, what is the equivalent for light color paint ?
Hi Brian, thanks for another great video and review. Being over in the uk it can be difficult sometimes to source products you review on this side of the pond. But as I was really blown away by this product I reached out to Aaron at extreme solution to see if they would ship to the uk. Aaron advised the product is sold in the uk under a different name, Final Finish and can be bought through autobright 👍👍😀. Keep up the good work even though it costs me a lot of money....lol Hope you have a great Christmas holiday and New Year and look forward to more videos in 2020!! All the best, Andy 👍 Ps Amazing customer service from Aaron @ extreme solutions
Apex Detail my 2020 silver Ford Escape titanium hybrid is in great condition and no scratches that I see. Would u recommend me using LVR 403 with like a soft polishing pad to amp up the gloss before sealant and wax or I also have Sonax perfect finish but since I don’t see any scratches I’m thinking no need for aggressive pad or compound. What do you think?
Great video Brian ! Dang ,as we say in the South ! I got to get a pint of that stuff ! I have a lake country white polishing pad ,would that work okay ?
I tried this after seeing your videos on it. I lived it, but Xtreme recommended I use LVR 404, which is supposed to be the same, but for lighter color paints... It's not. I like LVR 403 much better.
Just received mine. Good size bottle for 11 bux! Just curious what pad is that in this video and can you recommend a pad? Was thinking trying the new euro fiber compound and finishing pad possibly.
Brian, did I understand you correctly- you can apply a ceramic coating over this after fully curing? Just cautious because of how much the coating companies stress the paint being completely bare.
Hi Brian. I noticed you used a yellow pad, could you have used a less aggressive pad? Did you base the pad choice on experience or did you do a test spot to determine the pad choice?
Thank you for this video, I've been looking for something that can give my single stage 20 year old car some much needed help with that final bit of pop to it's black paint without taking more of a dwindling thickness away from it. This sure sounds like what I've been missing!
Im a beginner at correcting paint and i was wondering if this would be a good product for a beginner. My black car has minor defects not terrible but definitely there. And which pad would you recommend using with this product on a panel with swirls and minor scratches.
Brian, I should have asked this in my last post..... for us mere mortals that don’t have a shop large enough, what do you recommend doing for the cure time of 24-48 hours. I have a full size pickup and was thinking of purchasing some type of cover to use while it cures but I am not sure if this would affect the time to cure or cause the cover to do a zen thing 😉 (become one with the new finish). Obviously it would need to be protected after it cures. Thanks.
This stuff reminds me of used car yards that fill up paint with products like this. First wash at home and the owner is wondering what happened to their paint when all the scratches are uncovered.
No offense, I like how you do the process not another guy. I like the way how you spread the product, grab the machine even wipe the residue off . Great product
What I noticed that it looks like you can cover a larger area than with other products. It seems like a great product. Can one cover a larger area at a time with this product when it comes to polishing with a polisher?
@@rskrks I couldn't tell if it's an F30 or a G20. F30 was called the 335i from 2012-2015 when it had the N55 engine. They started calling it the 340i when it got the B58 engine.
Brian - I have a 2017 F150 with "white gold" paint, a champagne like color. I have some very light scratches and I would like to make the color pop. Should I use LVR 403 or 404 for this color?
How would a polish know if the paint is dark or light? Honest question considering you're correcting the clear coat. I watched a junkman video where he sorta laughs off polish for dark paint vs light paint
Tldr it cant. Sometimes more fillers are used for darker colors because it's easier to see fine scratches In dark paint. It sounds like a glaze. Fillers are a no no for experienced detailers. He's basically testing the fillers. A true compound, polish and wax would last way longer and probably look better. A glorified infomercial or product demonstration, Unfortunately Apex detail is selling out and becoming a paid influencer. This always happens when they get a large enough following. Dpc was the last one to go this way. I was suspect of his promotion of the xtreme solutions detailer spray. This just confirms it for me. Time for me to move on to newer smaller detailers and mostly sticking with independent reviews and testing from forums etc.
@@taz4100 if someone is trying to sell me a product thats made for darker colors I think I'm calling BS on that one. The filler aspect makes sense but then again all it's doing is hiding rather than fixing which is fine if that's your goal.
What a polishing and sealing glaze? It contains a sealant? Stage 2 to Stage 3 ? I know compounds, polishes but i have no clue what a glaze is? is this a finishing polish?
Hi Brian, I'd like to consider using this on a grey 08 Honda. I'm looking to try a paint enhancement with the 403 then add TW ICE for my 1st polishing w the Griot's G9, how much product do we need for 1 or 2 cars and which pads would you suggest ? Thanks
How long do you find an acrylic product like this will last in terms of gloss and filling without a topper? I know it varies depending on how it’s maintained but roughly
As impressive as it is, most of my clients won't give a shit about the levels of gloss because they're already driving relatively new cars. I wish I could show the exponential difference on a real beater with oxidized clearcoat.
Will this with an aggressive enough pad remove an old ceramic coating? And, if so, would you want to do the a pass to remove the coating, then a second to lay down the acrylic, or would one pass total be sufficient?
I want to layer a ceramic coating over lvr403 after it cures 48hr. Do I use a IPO on the 403 before applying the coating. I dont want to ruin the beautiful look of the 403 polish
@@Retset Hi RetsetVX, we are a complete different company - autobright.co.uk. www.autobright.co.uk/polishes-pads/final-finish-250ml-1l-ff1l If we can help with any advice on our product range we would be delighted to do so. More new products being released in the New Year.
Would you use this after a heavy cut compound in a 2 step polish to remove the hazing and bring out the gloss on a black vehicle or would you suggest another product?
Which pads did you use on the Honda ? This is almost like a 1 step but you can add wax after 48 hours .. would white or orange LC CCS pads be ok to use ?
HI, what would be a good combo with xteme lvr products, to remove scratches and swirl, then bring to an amazing shine, and what would be the best thing to protect, coating, sealant or topper
Hey man, you mentioned it's not the highest gloss overall but what is the highest gloss overall? I'd like to polish out to the highest gloss (within somewhat ease) using a product that I can ceramic coat it after finishing.
So I guess my question is if the paint isn’t that bad but needs a good one step and I go over it with this can I still expect such a huge jump in gloss or is it relative to the finish ? Meaning if the paint isn’t that bad you see less jump whereas if the paint is worse you see a larger one ?
acrylic is a type of paint like enamel. I don't believe it will provide a protection, but adds strength to the paint. Most products that have fillers in them fillers go away by first wash or rain, where as by the explanation of this product it is more of a permanent filler.
how does the cut and finish of this compare to sonax perfect finish? and if you topped this with say sonax polymer net shield would it increased longevity? I
Use code apex10 for discount!!!!
What should we match this up with as a topper? I was thinking that after 48 hours that I would top it with TW seal and shine, but is there something similar that is better? I know TW seal and shine didn't have these gloss numbers. Is the gloss going to drop if I top this with S&S?
@@davidashley2719 Great question, I would like to know the answer to it too! Brian will tell us..
alberto
@Aaron Valure That's a great idea, I must get one for the wife.
Brian, You know all about C5's. Planning to use 3D One on a Uro-fiber 50/50 or Lake Country purple foamed wool pad to remove light swirls. Follow up with Xtreme Solutions LVR403 Foam Pad Polishing Glaze. Can I then top with TAC systems Shinee spray wax or Xtreme Solutions Poly-Seal for the ultimate gloss for car shows? Learning so much from you. Keep up the good work and Merry Christmas from Kansas.
I dont do this alot but I went ahead and purchased a quart of the lvr 403 so I can try it out as you peaked my interest! I really hope I get the same results as you! Thanks for the video!
Same here lol
Retired at 49 - a have you used it yet? Your thoughts?
"The boss here is happy, her tail is wagging and so is mine" love that line 🤣🤣
Extreme Solutions is one of the most underrated brands out there... they make some great stuff.
Ed Draper all it is...is rebranded Puris products
@@PeteyMcSavage how do you know this where do you come by this information? Not saying you're wrong I'm questioning how you know this
deepsquat600 I stayed at a holiday inn...... its actually made by m and m chemicals (maybe wrong name it starts with a M) of Denver Colorado they are one of top chemical manufacturers that formulate base detailing product then company buy base stock or have custom formulation of there base products puris is there own brand they created. Extreme solutions use this company the large manufacturer and some puris products. I assume they have them do custom formula or have additives to base materials
Puris is an offshoot or division of the M and M company it is not part of extreme solutions
Matt Gavin how do you know that?
@@PeteyMcSavage I believe it's B&B Blending, check thier website, you'll find the whole Jade line (Puris), Detail King carries the Jade line as well. I beieve B&B bought Puris, which was a European company.
This video just answered my question I asked you earlier today. thanks bud. This is exactly what I am looking for. Something that will fill, and something a ceramic coating will adhere to
Come on Brian. What detailer (professional like you or newbie like me) doesn't want EVERY new product that gives great results.
Thanks for the discount!! Love the channel.
Off to Amazon 😊
Gloss on those cars looked unreal 😍
There are so many options! Would love to see a video where you provide your first pick series of products from cleaning to base coat to ceramic to wax and topper. Especially first preference (or ties) for people without garages, as well as confirmation that the products are available. A few things seem to be out of stock on the xtreme site. I have a black lexus I plan to drive for 5 years, but no garage. I 'd love to really take my time one weekend soon and just spend a couple days doing a really thorough clean and then layer a few things. Plan to start with a good polish and decontamination and then ceramic base coat or two. Have the adams car wash, have the citrol and goof off pro. planning on a couple coats of clean and shine and then would like to do one more type of thing on top of that if it's advised, and then do the 'secret sauce' stack to finish, except the LVR367 magnum wax is out of stock, so was hoping to use their topper for that step instead. Just not sure if it will get the same results or if there is a different substitute. Have watched close to a dozen Apex videos, love how clear everything is, have learned a lot!
Hi Guys, team Autobright here. I must thank Aaron of Xtreme Solutions for guiding UK customers to ourselves for this product available from our website autobright.co.uk under our brand name - Final Finish.
I have been using this product for many years as a final stage to boost the gloss and it really enhances your final finish.
Loving the video Apex Detail
This looks like a good find B!
WOW !! Huge turnaround and gloss boost !! I must try this product on my steel gray GTI.
You sold me on this one, plus who can resist a coupon code?? 😀 I think this will be great on my wife's Jeep, it's a bit darker and hopefully this will help fill some of the little flaws.
Oh my.. this one is definitely going on the list 👀
Great video Bryan. Wish I had more money, to buy more products. That looked great and FUN. I LIKE MAKING VEHICLES SHINY AND SLIPPERY.
Wow. I'm sold, this will be the jeweling before zipang coat in spring
Is this not a Glaze will fillers in it? Personally I'd be a bit wary dropping $330 worth of coating on top of an 'acrylic glaze' until it's long term viability has been proven. Will the glaze affect any of the limited swirl-reduction capabilities if Zipang?
Thanks for the tip about the interior piano black panels.
I have just subscribed to your channel. Direct instructions and information and no silly antics or music. I have 2 questions. Do you still like/recommend Meguiar's synthetic sealant? I am getting ready to ceramic coat (Avalon King) a friends car. What polish would you use to remove swirls and scratches? I knooowwww there are tons out there. Thank you
Just ordered the Sucker Jr as a Christmas gift to myself. Nice to see how products work before I shell out social security dollars on a hobby car. Thanks for your research, testing and evaluation.
great video and product review good friend. looks like a homerun.VERY well priced. so it's basically polishing glaze?would u recommend using rotary or da?b well good friend
Got my 403 and my PolySeal , I’m pumped if it doesn’t tomorrow it’s on !
Learned a lot from you! But I have info overload! LOL. Would love some suggestions or video on how to maintain a brand new pearl white car, like a 2020 Subaru Outback with the plastic trim. Something your college graduate daughter could do (hint). Thank you!
Brian, would you still do a IP wipe with this product or ones meant to be a base or “primer polish” before applying a coating? If so at what point before or after cure? Thanks you are the goat.
I spray a 10% IPA into a microfiber to prep...never straight onto the paint .
Great stuff Brian. Only down side is keeping a vehicle down for 48 hrs. To clarify, you are saying wait to put protection on top or it can not be used in the climates or be outside?
I think you would be fine to add protection right after. No other polish or glaze I’ve seen makes you wait to add protection. I just ordered some and just going to layer it right after
I’ve got lots of Xtreme Solutions products... they work great! 👍👍
Which of there compounds have you tried.
Kris Hi, sorry, just saw this. The LVR2 is great for getting out deeper scratches, and I really like the dynamic cut compound as it gets out lots of scratches and it’s very easy to remove with no dust. Then follow up with their ICE FTW! 😊
Finally. First thumbs up. And wow. Letting someone else run the DA. Brave man. I always took you for being like my personality type, the one that just needs to do it myself if I'm going to have it done right. Haha One of my handicaps. I've never seen the gloss meter start so low. Wow now that's some gloss. Sheesh. Amazing. Would this be a good one to use as a polish to finish with after using 3D One? My 3D One is doing great on our vehicles. Loving it. Got almost all scratches out of our white Honda Odyssey. But I need to really over pop it since it's white.
The other guy is Dan, he's been in a few of Brian's videos, Brian will tell you other than his son and Sissy, Dan is the only he will allow past the shop doors. Yeah Dan is good.
Your videos are so helpful, especially to a newbie like me.
Would love to see the 404 helios on a white pearl. Hopefully it turns out as good !
At 4:22 you switched to a yellow pad on the Honda, was that Rupes Yellow? It looked soft as you rolled over the edges on the hood. Product looks to do an excellent job on restoring the gloss and turning clear as you polish is helpful.
To me it appeared to be a Max Shine, Brian has been using Max Shine pads in his more recent videos.
Jay Zstr is yellow softer than the orange pad then? Thx
Brian, will 403 work to correct minor imperfections on a coating like Essence+ or will it remove the coating? I have the good fortune of living 15 minutes from Extreme Solutions in south jersey. The guys there are great!
Wow! Looks like a great product and not unreasonably priced either!
Brian...I’m looking to buy a gallon of either power clean or carpro multi-x as per your recommendation for a pre-treat for soiled exteriors. I want something that is effective on the whole exterior including glass & plastic trim. I saw I can buy a gallon of power clean for $35 where as multi-x is around $85. Is multi-x really worth the extra money over power clean?
You’ve taught me a lot Brain ... many thanks
Excellent product. Is this similar to Car Pro Essence it how it works or is it completely different??? We have single stage paint so would suit them I imagine.
Another great video , what would you recommend for white pearl to make it pop like that. Thanks again
Insane turn around and crazy gloss unit readings as well. but what kind of protection will keep these numbers? will a wax or a coating bring it down?
I love the performance of the product but have only white cars. Will this product work on lighter color paint as well? If not, what is the equivalent for light color paint ?
I will cover that soon.
@@apexdetail85 me the link of yours that covers the Lighter to White paint. Thx
Hi Brian, thanks for another great video and review. Being over in the uk it can be difficult sometimes to source products you review on this side of the pond. But as I was really blown away by this product I reached out to Aaron at extreme solution to see if they would ship to the uk. Aaron advised the product is sold in the uk under a different name, Final Finish and can be bought through autobright 👍👍😀.
Keep up the good work even though it costs me a lot of money....lol
Hope you have a great Christmas holiday and New Year and look forward to more videos in 2020!!
All the best, Andy 👍
Ps Amazing customer service from Aaron @ extreme solutions
I must say a big thank you to you Andrew for your comments - really appreciate you taking the time to post.
Is there similar product? I live in Sydney Australia but can't find it here
WOW! Look at that GLOSS from just a little bit of work! I want this!
Brian, this stuff looks awesome. Once the 24-48 cure time is done what if anything would you use as a protectant?
You could use anything on top of this.
Apex Detail my 2020 silver Ford Escape titanium hybrid is in great condition and no scratches that I see. Would u recommend me using LVR 403 with like a soft polishing pad to amp up the gloss before sealant and wax or I also have Sonax perfect finish but since I don’t see any scratches I’m thinking no need for aggressive pad or compound. What do you think?
Great video Brian ! Dang ,as we say in the South ! I got to get a pint of that stuff ! I have a lake country white polishing pad ,would that work okay ?
Absolutely.
Great video... sweet polish!
I tried this after seeing your videos on it. I lived it, but Xtreme recommended I use LVR 404, which is supposed to be the same, but for lighter color paints... It's not.
I like LVR 403 much better.
Just received mine. Good size bottle for 11 bux! Just curious what pad is that in this video and can you recommend a pad? Was thinking trying the new euro fiber compound and finishing pad possibly.
Reminds me of Poorboys Black Hole.! What's the point of an expensive gloss meter. If you don't take readings from the amazing looking cars?
Wow! 30+ point jump in gloss. 👍🏼
Brian, did I understand you correctly- you can apply a ceramic coating over this after fully curing? Just cautious because of how much the coating companies stress the paint being completely bare.
Brian how would you compare this to tac systems shiny wax? In terms of gloss.
Sounds like a great product for my thin, super soft, OEM single stage black paint on my XR4Ti. I can’t get anything to finish nicely on it.
Hi Brian. I noticed you used a yellow pad, could you have used a less aggressive pad? Did you base the pad choice on experience or did you do a test spot to determine the pad choice?
Both. Even with experience...I still do a test spot.
John Schiesser , isn’t rupes yellow second from least aggressive?
Chris Atchley I think he said he was using Maxshine pads for this video. Is that correct Brian? Thx
Nice video, Brian. My question can you lay a ceramic coating since it has fillers. Thanks again.
Brian are any of their compounds worth looking into. Thanks
Thank you for this video, I've been looking for something that can give my single stage 20 year old car some much needed help with that final bit of pop to it's black paint without taking more of a dwindling thickness away from it. This sure sounds like what I've been missing!
Should be good on getting some minor swirl scratches on my black SUV! I think I am going to order it.
Wow, that thing pops!
Im a beginner at correcting paint and i was wondering if this would be a good product for a beginner. My black car has minor defects not terrible but definitely there. And which pad would you recommend using with this product on a panel with swirls and minor scratches.
Brian, I should have asked this in my last post..... for us mere mortals that don’t have a shop large enough, what do you recommend doing for the cure time of 24-48 hours. I have a full size pickup and was thinking of purchasing some type of cover to use while it cures but I am not sure if this would affect the time to cure or cause the cover to do a zen thing 😉 (become one with the new finish). Obviously it would need to be protected after it cures. Thanks.
correct me if I'm wrong but 403 doesn't protect much, it makes it shine. What would YOU use as a long term protection to put on top
What’s the best acrylic paint sealant to compliment with this? Will Wolfgang paint sealant work with this? Thanks
This stuff reminds me of used car yards that fill up paint with products like this. First wash at home and the owner is wondering what happened to their paint when all the scratches are uncovered.
No offense, I like how you do the process not another guy. I like the way how you spread the product, grab the machine even wipe the residue off . Great product
What I noticed that it looks like you can cover a larger area than with other products. It seems like a great product. Can one cover a larger area at a time with this product when it comes to polishing with a polisher?
Which brand microfiber pad is that? You said microfiber, but the orange color is throwing me off. Thx Brian
Looks like a def. keeper!!! Any idea of the durability if no other protection is chosen or used?
You can stack your protection of choice on top. I have tried everything. Durability on its on is a few months.
HOLD UP.
"twin turbo 330"
The 335i is twin turbo, the 330i is single turbo. Love your videos.
Hey He is a Finish Guy ! LOL Merry Christmas,
I think you mean 340
@@rskrks I couldn't tell if it's an F30 or a G20. F30 was called the 335i from 2012-2015 when it had the N55 engine. They started calling it the 340i when it got the B58 engine.
@@rskrks I can see now that's a G20. You're correct, it's a 340i.
Brian - I have a 2017 F150 with "white gold" paint, a champagne like color. I have some very light scratches and I would like to make the color pop. Should I use LVR 403 or 404 for this color?
How would a polish know if the paint is dark or light? Honest question considering you're correcting the clear coat. I watched a junkman video where he sorta laughs off polish for dark paint vs light paint
Tldr it cant. Sometimes more fillers are used for darker colors because it's easier to see fine scratches In dark paint. It sounds like a glaze. Fillers are a no no for experienced detailers. He's basically testing the fillers. A true compound, polish and wax would last way longer and probably look better. A glorified infomercial or product demonstration, Unfortunately Apex detail is selling out and becoming a paid influencer. This always happens when they get a large enough following. Dpc was the last one to go this way. I was suspect of his promotion of the xtreme solutions detailer spray. This just confirms it for me. Time for me to move on to newer smaller detailers and mostly sticking with independent reviews and testing from forums etc.
@@taz4100 if someone is trying to sell me a product thats made for darker colors I think I'm calling BS on that one. The filler aspect makes sense but then again all it's doing is hiding rather than fixing which is fine if that's your goal.
I was thinking the same thing, would love an answer on this.
@@DavidStillman78 maybe tomorrow haha
@@taz4100 Well said buddy 👍🏴
Can u explain by what you meant by acrylic. What product do u use for acrylic?
Acrylic is a type of plastic that resembles glass.
What a polishing and sealing glaze? It contains a sealant? Stage 2 to Stage 3 ? I know compounds, polishes but i have no clue what a glaze is? is this a finishing polish?
Hi Brian, I'd like to consider using this on a grey 08 Honda. I'm looking to try a paint enhancement with the 403 then add TW ICE for my 1st polishing w the Griot's G9, how much product do we need for 1 or 2 cars and which pads would you suggest ? Thanks
Isn't one of the things that made liquid glass so good was the fact that it was an acrylic and not actually a wax?
deepsquat600 yes
How long do you find an acrylic product like this will last in terms of gloss and filling without a topper? I know it varies depending on how it’s maintained but roughly
As impressive as it is, most of my clients won't give a shit about the levels of gloss because they're already driving relatively new cars. I wish I could show the exponential difference on a real beater with oxidized clearcoat.
Will this with an aggressive enough pad remove an old ceramic coating? And, if so, would you want to do the a pass to remove the coating, then a second to lay down the acrylic, or would one pass total be sufficient?
I want to layer a ceramic coating over lvr403 after it cures 48hr. Do I use a IPO on the 403 before applying the coating. I dont want to ruin the beautiful look of the 403 polish
I would also love to know thoughts on this. Seems like an IPA wipe would remove the fillers left behind by the 403…. Can anyone help with this ??
How do you think this product would compare with an of the Meguiar's mirror glaze polishes, thx Mario.
Brian what type of microfiber pad was that? Was it the Uro 50/50 pad? Thx
Looked like the other one they do, the finishing one as it was all black. Not 50/50.
Hmmm I’m out of polish angel glass coat wonder if this would accept spritz or high gloss?
I can’t find more lvr 403 anywhere!!!!
I know, late to this party... Do they make one for white paints?
What speed are you running the polisher on? Please and thank you Bryan.
Got all excited then found it's not for sale here in the UK. I really like the idea of hardly touching the clear.
Google that part number Brian listed, it maybe dustributed under another name, like The Rag Company here in the U.S. is The Rag Master in EU.
autobright final finish same product uk sister company
David Webb ah, the same people that make my foam lance I guess. TY!
@@Retset Hi RetsetVX, we are a complete different company - autobright.co.uk.
www.autobright.co.uk/polishes-pads/final-finish-250ml-1l-ff1l
If we can help with any advice on our product range we would be delighted to do so.
More new products being released in the New Year.
@@AutobrightUK Ah, yes, you have a 'g' in the name! Thanks for the link. Have a great Xmas!
Going to try this one.
Would you use this after a heavy cut compound in a 2 step polish to remove the hazing and bring out the gloss on a black vehicle or would you suggest another product?
Can I put a spray ceramic sealant over this? Do I have to wipe with ipa first or will that ruin the idea?
Which pads did you use on the Honda ? This is almost like a 1 step but you can add wax after 48 hours .. would white or orange LC CCS pads be ok to use ?
HI, what would be a good combo with xteme lvr products, to remove scratches and swirl, then bring to an amazing shine, and what would be the best thing to protect, coating, sealant or topper
When I asked xtreme solutions u can apply wax directly after no need to wait till it cures
Does it not stain trim like the last cut and optimum hyper system?
No staining.
Hey man, you mentioned it's not the highest gloss overall but what is the highest gloss overall? I'd like to polish out to the highest gloss (within somewhat ease) using a product that I can ceramic coat it after finishing.
Apex Detail is that the Pro series ll ? If you had only one choice between a griots G9 or a Maxshine M15 Pro series ll, which one do you grab? Thx
Try this by hand with light pressure. Sick!
Max shine 15mm 900watt or the pro 1000, is the difference worth the extra money for the pro?? Thanks JP IN SD.
Can the new turtle wax polish and wax be used as a base for a ceramic coat or should I be a polish that gets stopped with an ip solution?
Will this work with a urofiber 50/50?
Where is the best place to buy these products?
Hi Brian. Would this be something I could use once a year with a black finishing pad to exfoliate my paint before applying my sealant or wax?
Do you need to wait the full 24-48 hours before coating?
So I guess my question is if the paint isn’t that bad but needs a good one step and I go over it with this can I still expect such a huge jump in gloss or is it relative to the finish ? Meaning if the paint isn’t that bad you see less jump whereas if the paint is worse you see a larger one ?
Exactly.👍
What type of protection is acrylic? Its an older term I have seen with Klasse products, but it isnt talked about much?
acrylic is a type of paint like enamel. I don't believe it will provide a protection, but adds strength to the paint. Most products that have fillers in them fillers go away by first wash or rain, where as by the explanation of this product it is more of a permanent filler.
Acrylic is a clear plastic that resembles glass. Very similar to clear coat.
how does the cut and finish of this compare to sonax perfect finish? and if you topped this with say sonax polymer net shield would it increased longevity? I