Hello there, good video. Question: If you want to isolate one of the flash units (say you are using 2) can you turn one off so it doesn't flash via the X2T rather than turning off the flash? Useful to see what each flash is offering.... thanks
Thank you I finally got mine working, ihad my flash to the different setting, I really need to go through manual for this thing again. Edit Also throwing this out there, that is also compatible with the neewer 880s (the clone of the godox speedlite)
Thank you so much.. was looking for this for a while. Does it matter which company the flashes are from? Or can you connect multiple flashes from different makes to one trigger?
Hello . I want to use two devices simultaneously. Nikon Z6 + Nikon D750. I already have two godox x2tn transmissions and two godox ad100 flashes. If I set them all on the same channel, when I change the power on one transmitter, does it automatically change on the second one as well?
I have 2 GODOX AD400Pro’s and I can’t seem to get both connected to my Xpro receiver at the same time. Any advice? I know how to use the Godox AD400 Pro perfectly fine, but can’t seem to get 2 of them cooperating at the same time.
My Godox X2Ts receiver won't connect with my Godox TT685S flash anymore -is there a way to reset my trigger? I currently have my Sony A7iii set on fill flash and wireless flash.
Hi, i dont get it, you say set the ID on all but i dont get how you set the ID when the received only has two buttons, one for channel and one for group, there is no ID selection. Do set the ID on the speedlite itself? Not very clear to me... Sorry and thanks
Hey. I have a neewer strobe that came with a trigger. I want to buy speedlights to sync together but i dont know if they would support each other. Please help❤️
Is there something that stops the ad400 from the info off by itself after a period of idling? I use to press "mode" on the trigger to get it to activate again but it stopped working for some reason. Now the mode just says "off" on the ad400.
Hello, please can you help? I have trigger on camera Fuji and flash 685 in slave mode all work just when I set HSS on camera black bar happen... When I have flash directly on camera HSS work... where can be a problem?
The current problem that I'm running into is that I have a group turned off on the trigger, but it's still flashing when I take the picture. I don't know why but it's a pain when my wife and I are shooting a dance floor at a wedding and her trigger is setting off my flash.
I just came across your channel fam, great info which I needed too! am very much interested in speed lights and strobes, specifically for out door location shoots. i own 2 cameras, one being the (Sony A6000). when you can I def need your pro opinion as to BEST strobe and speed lights TTL capable and (Compatible) with a6000 appreciate it man! btw just Subbed liked with notifications. looking forward to more great content from your channel. peace!
Hi, I try to connect my godox flash to the x2 trigger but it does not work. It seems that they are connected because the test flash works but when I shoot with the camera does not light the flash. Do you have any idea ? Or how can I solve the problem ?
@@DoubtMeTech i use the sony trigger on the a7riii to control the speedlite 600rt or the godox v1c mounten on the reciver x1rc. They work perfectly just aperture has a stop difference
Anyone able to get the unit to do ATG TCM on Canon/Godox/Hasselblad/Fuji/Orlit/Profoto/Interfit TTL monolights? The ATG Gold X2t Kim X runs about $850 can do that. Just thought any got it working that would like to share.
Get your Doubt Me gear at www.DoubtMe.net/apparel
Follow me on TikTok and IG: @TheHyphenate
just upgraded to ad200 and couldn't get to use it mixed with the tt600 but now I can! Thanks a lot
Happy to help. Thanks for watching 🙏🙏
Thanks a lot!!! you are an Awesome teacher. Short, precise and easy to understand!
Happy to help. Thanks for watching 🙏🙏
thanks man you made this gem years ago and its still so helpful
Happy to help. Thanks for watching 🙏🙏
Simple yet so informative! This cahnnel is what I share to my friends learning the Godox flash systems!
Happy to help. Thanks for watching. 🙏🙏
Thanks a lot!!! you are a GREAT teacher. Short, precise and easy to understand
Thank you so much. I really appreciate that. Thanks for watching. 🙏🙏
I know this is an older video but this is exactly what I needed. Thanks
Happy to help. Thanks for watching 🙏🙏
Thank you bro super easy , well explained and not that long , perfect
Happy to help. Thanks for watching 🙏🙏
Useful msg. Within a minute i understood on the photoshoot
Happy to help. Thanks for watching. 🙏🙏
Outstanding. Thanks for saving me time and heartbreak.
Happy to help. Thanks for watching 🙏🙏
Thanks for the detailed videos. it helped me setup my flashes and I'm ging to use he trigger and flashes this weekend. You're my hero for thi week :)
Happy to help. Thanks for watching. 🙏🙏
Love your content - easy to understand and accurate as always.
Found the exact solution I was looking for. Thanks!
Happy to help. Thanks for watching. 🙏
You're the best!! Thank you so much for these awesome and helpful videos!!
Happy to help. Thanks for watching 🙏🙏
So thankful you made this video!
Happy to help. Thanks for watching 🙏🙏
Brilliant teacher... well explained....
Happy to help. Thanks for watching 🙏🙏
Thanks for the tutorial! Keep up the good work
Happy to help. Thanks for watching. 🙏🙏
Wow.. this made things soo easy.. Thank you
Thanks, bro. Very helpful, precise & to the point!
Happy to help. Thanks for watching and for the support 🙏
@@DoubtMeTech word!
Thanks for the easy to understand video!
Happy to help. Thanks for watching. 🙏🙏
LIFE SAVER! THANK YOU!
Happy to help. Thanks for watching. 🙏🙏
Excellent easy to understand
Happy to help. Thanks for watching 🙏🙏
Very good and very simple, thank you very much!!!
Happy to help. Thanks for watching
This one what I'm looking for
Happy to help. Thanks for watching 🙏🙏
Hello there, good video. Question: If you want to isolate one of the flash units (say you are using 2) can you turn one off so it doesn't flash via the X2T rather than turning off the flash? Useful to see what each flash is offering.... thanks
Thank you very much. this hepled me a lot
Happy to help. Thanks for watching. 🙏🙏
Thank you I finally got mine working, ihad my flash to the different setting, I really need to go through manual for this thing again.
Edit
Also throwing this out there, that is also compatible with the neewer 880s (the clone of the godox speedlite)
Happy to help. Thanks for watching 🙏🙏
Thanks for the video!
Happy to help. Thanks for watching. 🙏🙏
Thanks!
I greatly appreciate the support. Thank you so much 🙏🙏
Thanks brother ❤
Happy to help. Thanks for watching 🙏🙏
Thanks so much!
Happy to help. Thanks for watching 🙏🙏
Thank you! This helped a ton
Happy to help. Thanks for watching. 🙏
Thanks man, helped me a lot!
Happy to help. Thanks for watching 🙏🙏
Is their a way to sync TT560 with TT600 ? Or is the tt560 to old ? I have a trigger that came with the 560
Good explanation
Happy to help. Thanks for watching. 🙏🙏
Thanks to help us.. This video content very useful...
Happy to help. Thanks for watching. 🙏🙏
Thank you so much.. was looking for this for a while. Does it matter which company the flashes are from? Or can you connect multiple flashes from different makes to one trigger?
Flashpoint and godox flashes are the same, so those work together no problem.
Hello . I want to use two devices simultaneously. Nikon Z6 + Nikon D750. I already have two godox x2tn transmissions and two godox ad100 flashes. If I set them all on the same channel, when I change the power on one transmitter, does it automatically change on the second one as well?
This is so helpful 👍
Happy to help. Thanks for watching 🙏🙏
Thank you for the tutorial but my x2t trigger has a different looking menu . when I press mode it only shows on and off.
Have you had problems with your home or studio's power while using the Godox SK400 ?
I've actually never used that specific unit
Hello after I connected my speedlite it worked perfectly I wanted to connect single monolight later it failed to connect
Is it OK with Sony Alpha II with 24-70 kit lens?
How to set ad 200 & v860 iii at a time sync with X2t trigger godox
Can i use 2 x2t in 1 flash?
how do you know and change the ID of all devices?
I have 2 GODOX AD400Pro’s and I can’t seem to get both connected to my Xpro receiver at the same time. Any advice? I know how to use the Godox AD400 Pro perfectly fine, but can’t seem to get 2 of them cooperating at the same time.
My Godox X2Ts receiver won't connect with my Godox TT685S flash anymore -is there a way to reset my trigger? I currently have my Sony A7iii set on fill flash and wireless flash.
I followed the video, both won’t fire at the same time until I put the flash light on the camera
Sorry, but am i right in thinking if i had 2 of these. I could mount 1 on my D850 and control my SB700 that is mounted on another?
I have not tried it, but I think you can
Only if you got the ATG.Godox TTL receiver. Then some of the Nikon SB-700 will work.
If you have SB-900, SB-910 or SB-5000, then it will work.
Thanks for tips, Is it pronounced 'Go dox" or "God ox"?
Happy to help. It's pronounced "God Ox" 🙏🙏
GODO -X :D
Hi, i dont get it, you say set the ID on all but i dont get how you set the ID when the received only has two buttons, one for channel and one for group, there is no ID selection. Do set the ID on the speedlite itself? Not very clear to me... Sorry and thanks
The ID option for the receiver is in the menu
Can you please tell me how you would sync the two, if you had put v860 on camera and kept ad600 as ocf?
Hey. I have a neewer strobe that came with a trigger. I want to buy speedlights to sync together but i dont know if they would support each other. Please help❤️
Are they the same brand?
Is there something that stops the ad400 from the info off by itself after a period of idling? I use to press "mode" on the trigger to get it to activate again but it stopped working for some reason.
Now the mode just says "off" on the ad400.
straight to the point thanks man 🤌
Happy to help. Thanks for watching 🙏🙏
Does the controller only work for Godox flashes?
I don't know if it works with other flashes. I've never tried it. But for sure it works with flashpoint flashes.
Thanku
Happy to help. Thanks for watching. 🙏🙏
Hello, please can you help? I have trigger on camera Fuji and flash 685 in slave mode all work just when I set HSS on camera black bar happen... When I have flash directly on camera HSS work... where can be a problem?
The current problem that I'm running into is that I have a group turned off on the trigger, but it's still flashing when I take the picture. I don't know why but it's a pain when my wife and I are shooting a dance floor at a wedding and her trigger is setting off my flash.
how conect ad 300+ v860 with x2
I just came across your channel fam, great info which I needed too! am very much interested in speed lights and strobes, specifically for out door location shoots. i own 2 cameras, one being the (Sony A6000). when you can I def need your pro opinion as to BEST strobe and speed lights TTL capable and (Compatible) with a6000 appreciate it man!
btw just Subbed liked with notifications.
looking forward to more great content from your channel. peace!
Hi, I try to connect my godox flash to the x2 trigger but it does not work. It seems that they are connected because the test flash works but when I shoot with the camera does not light the flash. Do you have any idea ? Or how can I solve the problem ?
What camera? What settings do you have for flash on your camera? Make sure it says "fill flash"
Is there any chance that can we connect godox tt520 flash to X2T?
Unfortunately I dont know. If it has a built in wireless receiver, then yes it should
My x2ts in combination with the x1rc and speedlite mess up the aperure. F 2.8 in the lens is f4 on the flash. Both in manual and TTL..any clue?
You're using Sony and Canon triggers at the exact same time and linked together? What speedlight are you using?
@@DoubtMeTech i use the sony trigger on the a7riii to control the speedlite 600rt or the godox v1c mounten on the reciver x1rc. They work perfectly just aperture has a stop difference
Its not working for me im trying to connect it to 2 mano lights
Help!! If I select High Speed Sync mode, why does it still show second curtain icon on the menu overview?
Rusnė Draz on all my Nikons the setting for front/back curtain is on the camera.
I've got 3 tt600. And me and this x2t are about to have a fight
😂😂😂
Anyone able to get the unit to do ATG TCM on Canon/Godox/Hasselblad/Fuji/Orlit/Profoto/Interfit TTL monolights?
The ATG Gold X2t Kim X runs about $850 can do that. Just thought any got it working that would like to share.
Thanks 😊
Happy to help. Thanks for watching. 🙏🙏