This is the one! I was having trouble connecting my X2TN trigger and TT685IIN flash. The manual that came with it was no help. Thank-you for the walkthrough! 🔥🔥
What a HUGE help!!!! Every step by step instruction was super easy to follow. So happy I found your video was almost ready to send the trigger back. Thank you a ton!!!
Thank you so much for this, I struggle with connecting Godox 850-III and Godox X2-Trigger, but after this video, everything was so easy and straightforward. I've managed to connect them.
Hi there, thanks for this video! Just a quick hopefully not dumb question: when I fire the flash I have to wait a 5 or so seconds before the green light goes back on & I can fire again.. how can I change this so I'm not waiting so long?
The more it starts to heat up, the longer the recycle time will be. So as it gets close to overheating, at higher power outputs it will take longer, especially when taking a lot of continuous shots. If you can, lower the output power to get faster recycle times
same question. when i use the nikon version of this flash with my nikon and a x2t trigger, the flash only fires full manual power. can you do demo in ttl mode?
So helpfull, thanks!! it works to me. Dude i have a question. Each time i shoot the flash with the transmissor, the flash turns on the modeling light and it keeps on until y set it off from the flash menú. There is some option to not use that modeling light on the front at all?? I am a Canon user. (haha i already Fix it, it was just presing the MENU boton on the Transmissor by 3 seconds and done, that's the way to turn off the front light of modeling).
Hi, I have just received my Godox X2T and V860 II units and have been following your set-up procedure. Everything goes fine until I reach Time 2:26 secs where you confirm that the two units are talking together. Unfortunately, although I have followed you to the letter many times...when I reach that time mark and try a test by pressing the Flash button on the X2T...the V860 III does NOT respond...i.e no flash output. I note that during the set-up procedure you did not seem to SYNC the two units together... is this an omission or do the two units automatically sync when they are both set to the same Group and channel?? I would be grateful for any comment on my problem as I need the Trigger and Flash to respond to commands from the TRIGGER. Many thanks.. great video
it syncs automatically but I noticed with mine that it only triggers when the flash isn't directly in line with the trigger, if I hold my hand in front of the trigger the flash works but not if it has a direct line of sight which is incredibly strange. It also works if it's offset from the trigger to the side or below
How many groups are available in the mk iii? I can't seem to find a definitive answer in the mk iii manual online.. I've seen some photos of a group D & E - but no video. The mk ii, which I have, only offers groups A-C and M when the unit is on camera set to commander.
I’ve done everything said and grand, if I click the flash thing on the trigger it pops the flash, grand, everything synced, but then when I take a photo nothing happens
![Godox X2T Wireless Trigger with V860ii Speedlight Flash [ How to Connect/Link Tutorial ]](http://i.ytimg.com/vi/9BkG3vVNApQ/mqdefault.jpg)
![Godox X2T Wireless Trigger with V860ii Speedlight Flash [ How to Connect/Link Tutorial ]](/img/tr.png)
Get your Doubt Me merch at www.DoubtMe.com/Apparel
Follow The Hyphenate on instagram and TikTok: @TheHyphenate
Thank you!!! I've watched several videos telling me how to set up the controller OR the flash. But FINALLY I understand how to sync them together. 🤓
Happy to help. Thanks for watching 🙏🙏
This is the one! I was having trouble connecting my X2TN trigger and TT685IIN flash. The manual that came with it was no help. Thank-you for the walkthrough! 🔥🔥
Happy to help. Thanks for watching 🙏🙏
Finally. I got it! It's not like the 860ii, which was easier, but I got it right, from this video. Thanks!
Happy to help. Thanks for watching 🙏🙏
What a HUGE help!!!! Every step by step instruction was super easy to follow. So happy I found your video was almost ready to send the trigger back. Thank you a ton!!!
Happy to help. Thanks for watching 🙏🙏
Thank you so much for this, I struggle with connecting Godox 850-III and Godox X2-Trigger, but after this video, everything was so easy and straightforward. I've managed to connect them.
Great and concise video! Than you very much for the step by step set up.
Happy to help. Thanks for watching 🙏🙏
Amazing: Fast and easy. Thanks!
Happy to help. Thanks for watching 🙏🙏
Thanks a lot! ☺️
Happy to help. Thanks for watching 🙏🙏
Hi there, thanks for this video! Just a quick hopefully not dumb question: when I fire the flash I have to wait a 5 or so seconds before the green light goes back on & I can fire again.. how can I change this so I'm not waiting so long?
The more it starts to heat up, the longer the recycle time will be. So as it gets close to overheating, at higher power outputs it will take longer, especially when taking a lot of continuous shots. If you can, lower the output power to get faster recycle times
Thank you a lot finally I got this working
Happy to help. Thanks for watching 🙏🙏
can you upload video about how to use flash light for softbox? for outdoor and indoor? please. subscribed
Can i control the manual mode from the flash dial instead the trigger after both is connected ?
Yes you can
Will mounting the flash off camera on an L bracket cold shoe harm the metal connections at the bottom? If so how do you recommend you mount it? Thx
So with this setup its possible to use ETTL for off camera flash correct?
same question. when i use the nikon version of this flash with my nikon and a x2t trigger, the flash only fires full manual power. can you do demo in ttl mode?
@@guangguang1472hi it auto matically syncs to ETTL. managed to try this.
Thank you very much? great job👍
Happy to help. Thanks for watching 🙏🙏
Thanks You ❤ 😊
Happy to help. Thanks for watching 🙏🙏
Nice video
How to use the TCM. I miss this button
Thank you!!!
So helpfull, thanks!!
it works to me.
Dude i have a question. Each time i shoot the flash with the transmissor, the flash turns on the modeling light and it keeps on until y set it off from the flash menú.
There is some option to not use that modeling light on the front at all??
I am a Canon user.
(haha i already Fix it, it was just presing the MENU boton on the Transmissor by 3 seconds and done, that's the way to turn off the front light of modeling).
Happy to help. Thanks for watching 🙏🙏
Hi, I have just received my Godox X2T and V860 II units and have been following your set-up procedure. Everything goes fine until I reach Time 2:26 secs where you confirm that the two units are talking together. Unfortunately, although I have followed you to the letter many times...when I reach that time mark and try a test by pressing the Flash button on the X2T...the V860 III does NOT respond...i.e no flash output. I note that during the set-up procedure you did not seem to SYNC the two units together... is this an omission or do the two units automatically sync when they are both set to the same Group and channel??
I would be grateful for any comment on my problem as I need the Trigger and Flash to respond to commands from the TRIGGER. Many thanks.. great video
it syncs automatically but I noticed with mine that it only triggers when the flash isn't directly in line with the trigger, if I hold my hand in front of the trigger the flash works but not if it has a direct line of sight which is incredibly strange. It also works if it's offset from the trigger to the side or below
Thx for the the tutorial, but when i set the trigger and flash and press the flasshig button its ok but when i take photo is not flashig, why?
How did u change id on flash
How many groups are available in the mk iii? I can't seem to find a definitive answer in the mk iii manual online.. I've seen some photos of a group D & E - but no video. The mk ii, which I have, only offers groups A-C and M when the unit is on camera set to commander.
THANKSSSSSSSSSS U SAVE ME
Happy to help. Thanks for watching 🙏🙏
Is that x2t the best trigger for this you’d say?
I definitely think so
How many volts of AA battery is applicable for this trigger? 1.2 or 1.5? which one
Not sure exactly. I've used standard AA batteries before, but currently I use Li-Ion rechargeable AA batteries with it
Useful video
Happy to help. Thanks for watching 🙏🙏
I’ve done everything said and grand, if I click the flash thing on the trigger it pops the flash, grand, everything synced, but then when I take a photo nothing happens
Best
Happy to help. Thanks for watching 🙏🙏
THNAK YOU.... !!
Happy to help. Thanks for watching. 🙏🙏
Nice video
Happy to help. Thanks for watching 🙏🙏
What about hss?
great video and advice, thx
Happy to help. Thanks for watching. 🙏🙏
How to click on 1/8000?
Talk a little faster. Going to this and get the other one. Every video assumes everyone has had godox before