DeWalt Pole Saw

Поделиться
HTML-код
  • Опубликовано: 16 окт 2024
  • It is great to restore old tools and give them new life, but we have to admit not all vintage tools are the most efficient. Some new tools are very pragmatic for getting the job done. For me, they help get jobs done so that I can get back to restoring the fun stuff. This is the case for my newest tool, the DeWalt 20v cordless pole saw. Come join me for the fun.

Комментарии • 36

  • @jalleman61
    @jalleman61 9 месяцев назад +1

    Good and honest review.Just got one for Xmas but haven't used it yet

    • @toolscouter
      @toolscouter  9 месяцев назад

      Thank you and congratulations. Hope you find it to be useful. Have a great weekend and a happy new year.

  • @andyschad6882
    @andyschad6882 7 месяцев назад

    Have owned this saw for several years and would buy it again. Amazing how long it goes on one battery. Only issue we have is the unit leaks oil all the time. Fill it one day and the next all the oil has leaked out. So we only put in as much as we need. Have not found a fix, but told this is a common issue with this saw. Otherwise, works great!

    • @toolscouter
      @toolscouter  7 месяцев назад

      Good to hear it. I have had very good results with mine, and it has served me very well. You are right though, it does leak oil badly. I hang it from the ceiling, horizontally and oil tends to stay in the reservoir. If I hang it vertically or lay it on its side on a shelf somewhere it will leak all over. Thanks so much for stopping by the channel and sharing your experience. Have a great week.

    • @Moonshinedave1
      @Moonshinedave1 Месяц назад

      From other videos I have watched on this pole saw, I am told the oiler is a drip type, and needs to be emptied before storing. It does say to empty the oil tank in the owners manual (who reads those?) Here's my take, if I am only doing some small trimming, I don't even use the oil tank but have a small pump-type oil can I keep with me, before starting and after a cut or two I give the chain/bar a few squirts of bar oil. Works for me.

    • @andyschad6882
      @andyschad6882 Месяц назад

      @@Moonshinedave1 Great Idea! Thanks!

  • @Johncollins219
    @Johncollins219 2 года назад +1

    Just ordered one and it will be here tomorrow

    • @toolscouter
      @toolscouter  2 года назад

      Good for you, happy cutting.

  • @campkemp9466
    @campkemp9466 Год назад +1

    Great video!!!

    • @toolscouter
      @toolscouter  Год назад

      Thank you for stopping by and for your kind words. Hope it was helpful and have a great day.

  • @florinelr8154
    @florinelr8154 Год назад +1

    Hello sir, Are you satisfied with it, how does it behave over time, do you recommend this chainsaw? Thank you 🙏

    • @toolscouter
      @toolscouter  Год назад +1

      To date it has worked very well. The only limitations that I have run into is in regards to its size. Just can’t cut something that’s too big anything about 6 inches or smaller works well.

  • @shaundmyszewicz658
    @shaundmyszewicz658 2 года назад +1

    We have that and love it!!!!!

    • @toolscouter
      @toolscouter  2 года назад

      Glad to hear it and thanks for the comment.

  • @DanyRivard
    @DanyRivard 2 года назад +1

    I've just buy one …, at my age (57) i will not anymore make the monkey on a branch of the tree or on a dangerous stepladder .
    Thanks for sharing !!

    • @toolscouter
      @toolscouter  2 года назад

      I love your word picture and I agree

  • @leoemond9973
    @leoemond9973 Год назад +1

    my dewalt is a gas powered pole saw. i have an issue with the chain coming off and i do not know why, it seems like there;s too much oil for the chain. Not sure if there's a factory setting for the chain oiler. any help would be appreciated

    • @toolscouter
      @toolscouter  Год назад

      That’s a tough one without looking at it. Do be sure that your chain is tight enough but not too tight. Also see if all of the teeth are on the underside of the chain. If one or two of those teeth on the bottom of the chain are broke off, they might jump out of the track. Also, make sure your chain bar is tight. I have seen the rivets on the end of a regular chainsaw, bar pop, loose and it allows the track to widen and causes problems. do you have a small engine mechanic close by? Hope you’re able to solve the problem. Thanks so much for stopping by and good luck.

  • @melissadaugherty1923
    @melissadaugherty1923 2 года назад +1

    Thank you for letting us know it’s a good pole saw. I just bought mine.

    • @toolscouter
      @toolscouter  2 года назад +1

      So, how do you like it after three months?

  • @myintsein3549
    @myintsein3549 Год назад

    😮where can you buy a extended De Walt chain saw?. What a pity an advertising with no references to buy one.

    • @toolscouter
      @toolscouter  Год назад

      I was just sharing about the tool that I got. When I made this video my channel was almost brand new. I wasn’t being paid to advertise it, but I did get it on Amazon. I’m still trying to grow the channel and appreciate any comments and visits. Hope you have a great week.

  • @imlew7853
    @imlew7853 Год назад

    OUCH !!! Is it too much to under cut a branch ? Will do justice to trees.

    • @toolscouter
      @toolscouter  Год назад +1

      We do the best we can to undercut the branch, but it tends to bite and kick back. If you can get it to work right that’s fine but it needs a bumper on top to lightly leverage your cut. Thanks for watching and come back again soon.

    • @ForViewingOnly
      @ForViewingOnly Год назад +1

      @@toolscouter Great video, thanks. I was also wondering about undercutting branches with a pole saw, but I can see that it would not be easy to do with the saw being on the end of a 10' pole.

  • @barbcullenphotography
    @barbcullenphotography 2 года назад +1

    Now Aaron thinks he needs one to add to his fleet of Dewalt tools. 🤦‍♀️

    • @toolscouter
      @toolscouter  2 года назад +1

      Could be, have fun if you do. It is much safer for me, no ladders to be kicked out from under me when the limb drops and springs back.

  • @TheUnicornblood
    @TheUnicornblood 2 года назад

    What if you’re a midget and only 3’ tall? 😂🤣. Only getting 13’ reach lol

    • @toolscouter
      @toolscouter  2 года назад

      Yes, that is something to consider. 😄

  • @Roffepuck
    @Roffepuck Год назад

    Good, except for the stupid music added when you began using it.

    • @toolscouter
      @toolscouter  Год назад +1

      Sorry. Trying to make it somewhat entertaining. At the making of this video I was still relatively new to video editing and was still experimenting with the whole process. Hopefully my newer videos won’t be so abrasive to you. Thanks for watching and have a great week.

    • @beazyb
      @beazyb Год назад +1

      ​@@toolscouternothing wrong with the music thanks for the effort I'm going to purchase this.

  • @myintsein3549
    @myintsein3549 Год назад

    Music is. Annoying and distracting.

    • @toolscouter
      @toolscouter  Год назад +1

      I’m sorry I didn’t like it. I do. Hope you have a good week.

    • @trashes_to_treasures
      @trashes_to_treasures 8 месяцев назад

      There is so much more to the video than just the music.
      Great review, thanks for that!