How A VW Throttle Body Failed with VAG-COM Demo

Поделиться
HTML-код
  • Опубликовано: 29 июн 2015
  • For full show notes visit the blog at; goo.gl/NrFzcl
    Join me today as we break down:
    What is Throttle Body
    Who can control the VW Throttle body
    How does a cable driven VW throttle body work
    How does a VW drive by wire throttle body work
    How a VW throttle body fails
    Symptoms of a failing VW throttle body
    How to diagnose a failing VW throttle body
    Vag-Com Demo of Throttle Body
    Throttle body locations
    Can you DIY a VW throttle body
    Tips on ABA throttle body replacement.
    and more
    Sponsor of the Day
    shopdap.com/
    Humble Mechanic Podcasts
    • The Humble Mechanic Po...
    Failed VW parts videos
    • How VW Parts Fail
    Tool Reviews
    • Tool and Product Reviews
    How To videos
    • How To Fix Your Car
    MK1 VR6 Swap Videos
    • VR6 Engine Swap MK1 Ca...
    Follow me on:
    The Blog
    humblemechanic.com
    INSTAGRAM
    / humblemechanic
    FACEBOOK
    / humblemechanic
    TWITTER
    / humblemechanic
    GOOD STUFF ON AMAZON
    goo.gl/5304Qw (affiliate)
  • Авто/МотоАвто/Мото

Комментарии • 323

  • @petecurran3995
    @petecurran3995 8 лет назад +2

    Thanks, great explanations! Gotta love that VCDS. On a recent 2005 1.6 Golf I worked on, I got "17953 - Throttle Valve Controller
    P1545 - 35-10 - Malfunction - Intermittent"
    Any suggestions appreciated, though it's only intermittent so not too concerned unless it comes back with CEL etc.
    VW on, man!

  • @monasterix6
    @monasterix6 8 лет назад

    I own a Seat Leon 2014 1.4 tsi, sometimes I like to check all the parameters in my car with an OBD2 protocol. The thing is I noticed my leon was making only 125 HP when it usually makes 145. I made a run and noticed the throttle body is at ±12% at idle and tops 35% at 6000 rpm, is this ok? Thanks for your time, greetings from Mexico.

  • @Schen-Ten
    @Schen-Ten 6 лет назад +5

    Very informative. Loved the part where you explained the usage of vag-com .

  • @Goose2909
    @Goose2909 4 года назад

    Thanks for this informational video, it’s very usefull. I do have e question though. In block 62, what would it mean if the vallues of position 3 and 4 of the gas pedal are equal? M could this mean that the gas pedal is broken?

  • @momanskiakabiffbuz6004
    @momanskiakabiffbuz6004 6 лет назад

    I have a mk4 1.8t with 110kW, motor code agu. I think it has the dual system throttle(electric and manual). After reinstalling the throttlebodey after cleaning, is it necessary to adjust the cord to a specific position?

  • @robnaj2
    @robnaj2 3 года назад +1

    Thanks for the video. In the cable trottle body, whats the function of the vacuum lines. Does it assist for idle speed control and cruise control?

  • @paulthigpen4835
    @paulthigpen4835 6 лет назад

    Have a 2010 vw beetle 2.5 engine. Have changed out crank shaft sensor already. Car usually runs fine but will sometimes stall out and will not start back up until after it sits for a few hours. This last time it stalled it acted like it flooded. We were able to finally get it started back running after we pumped the accelerator pedal a few times and held it to the floor, then it cranked but ran rough. A few more times of doing this it started running good again. Could this be the electronic throttle body? One time before it surged a couple of times like it was going to die but didn't, and after it was parked in the shopping parking lot upon ready to leave it would not start until after several hours and then fired right up. (The fuel pump relay pulls in and we can hear the fuel pump run every time we turn on the ignition switch). One extra piece of information is we have no check engine light illuminated, so I suspect no codes. Hope you can help.

  • @nightwolff
    @nightwolff 4 года назад

    hi, my jetta mk5 throttle body is leaking coolant for one of the little tubings where hoses go on, i can see little fractures in the metal, can those tubings be replaced?

  • @sureshbipath824
    @sureshbipath824 5 лет назад +1

    Heya guys I have recently bought a mk4 golf 2001 1.6 n I see a vacuum hose missing from the throttle body , any ideas of what hose connects to would appreciate it thanks

  • @conaboot
    @conaboot 7 лет назад

    Hey Dr. Humble im a fan of yours and I do have a few questions. I have an 2005 Audi TDI B7 140Hp 16v BLB motor. I have done the oil pump swap 2 years ago and it was all good, last christmas it smoked and stalled on a 1200km ride and had a new EGR installed.
    The thing is after 4 months a Pollution light came on. I have erased it 2 times but always comes on.. 1st time the machine told it was the Mass Air Deb but I know it cant be, cause I dont have a loss of power. Just black smole when its on low revs and when I hit the throttle.
    A friend said it is a bad mixture of diesel and air and it got me thinking that it can be the trotlle body.
    The vacuum lines have no cracks and the throttle body has an rubber ring getting out and its leaking oil.. can it be the cause of it?

  • @nemozzzz1
    @nemozzzz1 5 лет назад

    You r the man i follow all your VW videos saved me a lot of money to fix by myself instead of dealing with dealership

  • @danielthompson7445
    @danielthompson7445 8 лет назад

    For 2.0 TSI , will need the VAG cable? I wasn't sure after your statement about the newer ones being plug and play

  • @PlasmaHH
    @PlasmaHH 7 лет назад

    What is the best way to figure out whether the motor controller is sending wrong data, or the throttle valve doing the wrong thing upon it? I have figured out so far that on a 1998 GolfIV I have in idle conditions suddenly "slams shut" and the motor going off, after restarting everything is fine again. Now I am wondering if the controller is overcompensating something the wrong way, or if it sends the right things but the throttle valve is doing it wrong.

  • @AoH9999
    @AoH9999 6 лет назад

    Hey Man, so I ran these blocks, and in block 062 sensor 1 and sensor 2 never fully invert, also in block 55 my idle stabilization is a negative -3.9%.....is this all correct, or is it time for a throttle body? Car is a 2010 Mk5 Jetta TSI

  • @goosetv8100
    @goosetv8100 5 лет назад

    Is it possible to short out a tb? Was getting tb faults and epc light and realized that one of the middle wires going to tb harness was broken at crimp from previous splice per tsb. Wiggled the suspect wire while engine was running and throttle body acted strange and would struggle to idle even after running adaptation and repairing broken connection. Did I somehow fry it or am I missing something? Have 5volts to the harness.

  • @randyvannorman560
    @randyvannorman560 7 лет назад

    While checking the OBDII check engine lite got a P0411...after rerouting the vacuum lines and retesting found the Throttle Valve Control Module making a High Pitch squeal sound, unplugged it and that's how assured it was it making the noise. What causes this squeal sound ...?? Does it need to be replaced or reset...??? Please advise.....On My 2001 VW Jetta GLS 2.8L,12V gas engine,......203k miles on her....Thanks.....oh cleared the P0411.......Randy

  • @TheJudokaGrappler
    @TheJudokaGrappler 7 лет назад

    Would I be able to use OBD to reprogram the throttle body or is Vag COM required?

  • @Danidasanic
    @Danidasanic 6 лет назад

    Hi . Can you help or give me any advice to solve my problem ? I have a vw polo 00 1.0 mpi with 3 errors from throttle body , malfunction , adapt. Not started and intermitent . I already tried another tb , ecu , checked the wiring (no resistence from ecu to the plug) ... I rly dont know where is the problem , i cant adapt the tb .. the gas padle can generate this error?

  • @alanwong928
    @alanwong928 4 года назад

    Hi buddy, i wanted to ask you about my vw polo throttle body i purchased, on the side where the gears are i can hear a rattling noise like the gears are rattling against the housing, where the plastic cover is. Is that normal? I cant remember my other throttle body doing that.
    It sounds as if something is broken in the gears part, hence making that noise.

  • @georgebarraza2334
    @georgebarraza2334 7 лет назад

    2001 VW Beetle 2.0L AZG. I was getting G188 code, replaced throttle body, now getting J388 adaptation error code. Not sure what I'm doing wrong, any suggestions?

  • @ilTubodiEliGabri
    @ilTubodiEliGabri 5 лет назад

    If i press the clutch, there is something related to the throttle body or not?
    I'm having an issue and the mechanic told me that the throttle body is the problem (Polo 9n3, 1.2, 2007, 45000km...)

  • @FaithisKey792
    @FaithisKey792 8 лет назад

    My 2009 VW PASSAT TSI 2.0 L Turbo just began acting weird. While I'm driving the engine lights comes on and TCI as well then I cannot go pass 2 thousand Rpm on all 6 gears.
    would the throttle body on my car need reprogramming after cleaning it or replacing it. ?
    p2181
    p0221
    where the codes that pulled up after scanning for codes.

  • @uniculCSM
    @uniculCSM 7 лет назад

    Is it ok to put silicone grease or special grease on the plastic gears? WIll that prevent them from wearing out?

  • @miguelalmanza1664
    @miguelalmanza1664 3 года назад

    Humble mechanic I was on the road driving my 09 golf gti and as I rolling down the st I decided to turn on my ac so not even 3 seconds the whole engine cut off! Just I try giving it some gas and the gas pedal felt like lose as soon as I got off the road try to push the break and it was so hard! Do you think it is the throttle body??

  • @scotta.728
    @scotta.728 4 года назад

    Quick ? Just got a 01 jetta vr6 12v. Has slow deceleration making shifting a lil delayed. I cleaned the TB. To see if it would improve that still having same issue. Do i have it reset or could it be something else cause slow deceleration. Thanks for ur time.

  • @colinaglae2605
    @colinaglae2605 6 лет назад

    Thanx for educating us on Throttle body problems.

  • @chrisvillalobos4995
    @chrisvillalobos4995 8 лет назад

    hello from chris i got an issues with my 95 vw golf3 its got 90425 miles and i was washing the engine one day and yes the car woulnt start but i had the issues with the coil replaced i had a used one got it running but then starting having idle issues and well replaced plugs wires cap and rotor and a new coil by beru also did a compression test and i got 150 for each cylinder so not what happens is when i fire it up runs good and smooth then it start to hick up and then fell like it wants to shut off but when i turn on the ac idle goes up i need your sdvise is it and issue with throttle or tps or something else

  • @joes.7536
    @joes.7536 6 лет назад

    Charles, is there any work around at all for a 1999 Passat Aeb 1.8t TB adaptation. I'm trying to switch to a chipped Ecu that has been in the car before. Few years ago. Now when I put it in there no communication with the throttle body. I don't have vag-com yet and I've tried reaching out to local enthusiasts here in Metro Detroit with no luck. The two shops I called refuse to make it a quick cheap thing. I have to make an appointment and leave it for the day even though it's a 5 minute job. Edit. With the unchipled ecu currently installed it runs smoother than butter.

  • @henrietta70
    @henrietta70 6 лет назад

    Golf 4, 2003, BCB, Trouble code 17961 and 17912. Cant give gas at all.
    In VCDS, group 62. In the two last boxes (accelerator pedal position) the numbers are almost identical. But is there one or two sensor in the accelerator pedal?

  • @alireza071
    @alireza071 8 лет назад

    hi i install egr valve to vw golf mk5 1.6fsi and the car come on ok but idling not as smooth as it should i think it need programing it can u please let me know how to doit i know i have to go to engine messuring block 072 but dont know whats next as im very new in vcds any help please

  • @jeremyvasquez9508
    @jeremyvasquez9508 4 года назад

    I have a 2000 VW golf gls 2.0 liter . Question what is the part located directly under the throttle body on this engine ? The car had a rough idle , and there is a rattling noise coming from the valve cover , so I pulled the manifold off to check my plugs and wires because of idle , and I left it sit like this for a while because I had no valve cover gasket yet and I wanted to take the throttle body off as well to clean it thoroughly , so I waited for this til I could get all necessary gaskets . Anyway today I noticed a black hose just hanging there and looked at it and it snapped and left the tiny clamp and part of hose on this part directly under throttle body. There is a I'm guessing solenoid of some sort attached to firewall driver side and there is another small hose that goes into the booster hoses. Is this some sort of vacuum line that snapped and was making my car idle rough ?

  • @spizongema2715
    @spizongema2715 4 года назад

    My vw mk5 don't pass 4 rev speed but it also cut patrol and you have to wait for atleast 2 hours. Do you think i need to change a throllle?

  • @checkengineautoservicios8212
    @checkengineautoservicios8212 7 лет назад

    gracias por compartir tus conocimientos pero puedes explicar un poco ha cerca de la coneccion de los pines dell throttle body

  • @james19X
    @james19X 7 лет назад +5

    these thing are so expensive. how can I repair this unit.

  • @daltoniks
    @daltoniks 5 лет назад +1

    can we have a video on checking intake manifold flap motor Bank1 and Bank2 - and how to fix them. I replaced mine with cheapest aftermarket from china.
    12 months and no issues at all.

  • @Dmt715wisco
    @Dmt715wisco 5 лет назад

    Dose a 1999 Passat 2.8 v6 need to be flashed or a cap discharge? Thanks in advance!

  • @alexrodriquez9866
    @alexrodriquez9866 4 года назад

    I have a 1994 vw golf with an isv does the adaptation still apply?

  • @TommyTen10
    @TommyTen10 6 лет назад

    My A4 B6 with BDV 2.4l V6 has fly by wire ! Will be doing the check soon, cheers.

  • @algraevan22
    @algraevan22 4 года назад

    Really need some help here, just replaced the throttle body because the EPC and Engine light came on, and it worked great for 2 weeks. But just a few days ago same thing happened, lights came back on and limp mode started. Getting P2101 and P2106 codes now. Not sure if the throttle body I got was bad (note: was remanufactured) or if I need to get a new pedal sensor. Any help? :( (also side note, when I installed the new throttle body, it said a idle speed relearn was needed, but I didn’t end up doing that cuz it worked out fine, could this be a factor)

  • @freesaxon6835
    @freesaxon6835 7 лет назад +12

    Great informative video thanks.!
    Watch that beard when sticking your head under the bonnet ( hood) whilst the engine is running lol

  • @jaredkelly925
    @jaredkelly925 2 года назад

    Any chance of an update for modern UDS cars? Throttle valve position 1 shows up as volts for me, and the accelerator pedal positions both read the same number. Thanks Charles!

  • @saitaxtaxi
    @saitaxtaxi 8 лет назад

    hi my car is cotavia 1.9 tdi 2005 105bhp. i ve vcds 14.10 2. in trying to alignment throttle body but code 098 0r 60 not opening it madule. any help??

  • @Faraonqa
    @Faraonqa 8 лет назад

    Question is there a way to fix the position sensor on a 1.4 on mk4

  • @Salesman666
    @Salesman666 4 года назад +4

    Made my car run smoother, thx!!!

  • @waynescott9938
    @waynescott9938 7 лет назад +11

    i had to install a new throttle body on my 2010 cc, it calibrated itself out after a few days of city driving and i didn't have to reprogram it for some reason.

  • @b0ba8
    @b0ba8 6 лет назад

    Hello i recently take of my throttle body and clean it and when i was doing it i shake the throttle body and something ratteld inside the throttle body is this normal or is something broken inside because after the clean the car runs better but somethimes i still have bad response when i putt my foot down on the gas pedall

  • @1co438
    @1co438 7 лет назад

    yo man I'm having problems with a Seat Ibiza throttle body, when I start the car it runs but the revs are constantly up and down from about 1000rpm to 2000rpm. The accelerator is completely unresponsive when its like this, I have already changed 2 throttle bodies because of this and read 2 actuator faults. I am thinking that maybe there are some bad connections or problems with the throttle position sensor in the pedal box but its not very obvious. Have you seen or heard about symptoms like these?

  • @76ChevyC10
    @76ChevyC10 7 лет назад +3

    2003 Golf 2.0l AVH. getting P0221 Throttle/ Pedal Position Switch B circuit Range/Performance. Been having this come on every morning and having no power. Ive thrown a used throttle body and pedal position sensor at it but still have the same code. ESP light on aswell. Any pointers? thanks man, love the channel.

    • @andrewpolitano
      @andrewpolitano 7 лет назад +1

      Same issue, 2012 Golf 2.5 here.. I'm under the impression that since the sensors are built into the throttle body itself, you would need to replace the entire throttle body assembly. How did your repair work out, interested to know.. Also, can't imaging VW offering the entire throttle body for under 500 bucks, just my luck..

  • @rectify2003
    @rectify2003 Год назад

    Brilliant explanation
    I cant find the in car lighting you mentioned in this video
    Thanks
    Subscribed

  • @isma2184
    @isma2184 6 лет назад

    hi ,i aa jetta 4g 2.0 and my car start but wen pree the gas pedal the engine stop if i press the gas pedal slowly the rpm goes to 3000 rpm but no more

  • @istvanszabo4650
    @istvanszabo4650 5 лет назад

    It seems you are an expert. can you please advise? I have a Passat 2 L Diesel 2013, while downhill with engine break engine fault signal came on. mechanic read error codes: P219600, O2 sensor (bank 1, sensor 1), System too rich, status [237] and P012100, Throttle-valve position sensor, signal improbable, status [096].
    he then cleared and let me go to see if it comes back. It did about 500 miles later downhill tempomat / cruise control on. some suggest it is the throttle valve started dying and needs to be replaced. car runs nicely smoothly same powerful as before. What do you think what should I do. Throttle house £ 250-350, position sensor (good for a lot of makes) £20, throttle repair kit ~£50, The car also has got a major service a month before. can it be a dirt from the filter/engine. Would a valve cleaning solve the issue?
    Thank you for any advice.

  • @rsalaises
    @rsalaises 8 лет назад

    i have a problem on my touareg 2004 epc and code p1633 i hope you have answer for that please

  • @2CleverInnovations
    @2CleverInnovations 6 месяцев назад

    Hey Charles great video as always, when you have an intermittent problem with codes P0221 and P0121 and the problem does not occur and codes are not showing when you're testing with your VCDS, should readings be normal as you're showing on your video here or you would see abnormal readings? Thanks

  • @kangjhha
    @kangjhha 3 года назад +1

    my 2012 golf jerks and makes a clumping noise when coming to a stop.. took it to the dealers and was fixed with a SW update initially. the problem issue is happening again after 4yrs, this time the dealer say it requires a throttle body cleaning and vacuum pump replacement.

  • @gsoup7850
    @gsoup7850 5 лет назад +1

    Superb information cheers

  • @juanloza7047
    @juanloza7047 5 лет назад

    Hi, i have a problem with my audi a3 2009 8p engine 2.0tsi ea888, i have the error p2015 and now the p0121, i change the intake manifold for a new one with the tps sensor new and the pressure too (all in the kit of the revition) but i still have the p2015, its possible that the throttle body is failure and give me the error p2015 after i change the intake manifold and sensor for new pieces? I note that driving normal the mixture was 14.5, but when i accelerate it charging the turbo the mixture go to 11.9 (a poor mixture) help please, i check all the wires and they are fine, i think the problem now is the throttle body, i need to change for a new one ? thanks!

  • @mohamedredouanecharaoui8421
    @mohamedredouanecharaoui8421 4 месяца назад

    Hello, does this VCDS adaptation will help fix my problem?
    Got a 2009 Altea tdi 2L 140 bkd and the throttle body valve was stuck due to cog had snapped inside so I replaced it for a new one and when I shut the car down sometimes it’s juddering still and sometimes it’s fine!,
    Using OBD2 scanner got a p2108 code: Throttle actuator control (TAC) module - performance problem
    Any idea what this could be? I’m pretty sure I can still hear the valve opening and closing though just sometimes it shudders on shut down and sometimes It doesn’t.

  • @bautistap8515
    @bautistap8515 2 года назад

    Hello. I would be very grateful if you could help. I got a 17' V8 FSI Touareg, bougth used and battery has been changed/disconnected for a while. Throttle pedal doesnt seem linear... If you press it a bit, it wont get going, checked with obd scanner and pressing an inch on the gas, will almost not move the relative throttle position. However, if I press halfway down, and then press it down an inch or so, it will definitely make a difference. By this I mean, when using it normally and accelerating after parking, or at a red light, I really have to press down on the gas to get moving. I compared relative throttle position with my VW Golf and pressing just a bit will change relative throttle. My treg feels very "unsensitive/unlinear". My mechanic supposedly did Throttle body adaptation. any other ideas?

  • @joyceisaacs2974
    @joyceisaacs2974 5 лет назад +1

    I've been watching your videos. I have a question. Car has been running fine but I was experiencing a tapping sound after a morning start and then it would go away, along with an intermittent check engine light coming on but never actually staying on longer than 60 to 90 miles. Mechanic cleaned the throttle and said to drive it for awhile and see if the check engine light comes back on, still have the tapping sound and now car sounds like it's overheating when I turn the engine off but no warning lights come on but it sounds funny and smells a little like plastic. I had them replace the catalytic converter a year ago, no work done on the car since, except for oil change but now this.
    2006 Jetta 2.5.... Just a lady needing some suggestions if you can help I sure would appreciate it.

    • @StopTeoriomSpiskowym
      @StopTeoriomSpiskowym 4 года назад

      Probably somethimg wrong with ground or Plus on starter. Example on your battery. Clean all ground under battery from battery to engine engine to starter.

  • @TheSweetVillain
    @TheSweetVillain 2 года назад

    HumbleMechanic I've just changed the EGR valve with a new one ( original ) on a Golf 6 diesel and I'm facing problems with the RPM when the regeneration is started and I'm standing still at a traffic stop. It doesn't go to 1000rpm and stay there as it normal should until the regen is over, it fluctuates all over between 1200 and 700 rpm. Also when accelerating, power is not the same, it accelerates a bit wierd. You have any idear what could be, have you ever encountered a situation like this ?

  • @connorwildeman3048
    @connorwildeman3048 3 года назад

    I have an mk4 2.0 and am getting a P0221 code, i saw your suggestion to repin the throttle body, not able to find much on youtube in regards to that. I'm going to clean the throttle body and yet I can not find anyone who sells the throttle body connector or foot pedal sensor. any help is appreciated!

  • @Juppie902
    @Juppie902 3 года назад

    Recently got a VW Golf 06 SDI Manual... During an OBD scan I have P2106, Throttle Actuator Control System (TACS)
    I disassembled the throttle plate body. It was clean, mild dusty. WD40, some rubbing with a clean cloth, its SHINING. But the error comes back after clearing DTCs.
    Help ?
    Throttle reaction is good thats why im baffled what the heck is wrong. Gears don't shift as smooth and sometimes when letting off the throttle in low speeds and for say 1st or 2nd gear, there is a mild "kick" from the car. But I suspect its all to do with overall bad maintenance of the car and specifically the transmission. Or am I wrong and its the throttle ?
    Also when letting the car creep on its own (foot off gas pedal) , in 1st its smooth, but in 2nd it sounds like its starving for some of that sweet diesel juice, a little. When giving gas there is again this mild "jerk" or "kick" you can feel. Can't feel it in higher gears (3, 4, 5)

  • @zuanetterios9698
    @zuanetterios9698 8 лет назад

    can the throttle body make my car not turn on ? We tried everything from battery to starter to jump the battery. It was giving me problems to start but now it wont start at all.

  • @miltondent76
    @miltondent76 7 лет назад

    I'm New to the channel and Love it! Does anyone know if it's plug & play for a 2012 VW Passat 2.5 SE throttle body replacement?

  • @likesrush
    @likesrush 3 года назад

    I will add that it still acts like it's sticking, either physically or electrically, but it seems physical because it return with greater speed than it ever had on its own. The wire throttles in 2003 anyway we're a little sluggish, or maybe that's just how they are. But now i
    when it unsticks, my car instantly GOES. But only for a split second and it's back to idle. No, that sounds more Electrical? I'm so confused, compounded by the tiredness and pain of trying to fix it all day. Please help.

  • @TheEnyi
    @TheEnyi 4 года назад

    my golf mk4 2.0 throttle valve sensor 2 G188 doesn't change when i step on the gas pedal what does that mean?

  • @fernandosalazar2193
    @fernandosalazar2193 5 лет назад

    So if I just clean it do I still have to get it programmed?

  • @ziggiburda1921
    @ziggiburda1921 4 года назад

    Hello
    I had cod PO638 Throttle actuator control bank 1. I exchanged throttle body, code still appear. What else it could be

  • @carlos_sacalul
    @carlos_sacalul Год назад

    Hi,and what is happening if i dont make the adaptation after cleaning the throttle valve body? Thanks

  • @yannyfresh
    @yannyfresh 5 лет назад +1

    Hey Charles. I have a 2016 Golf SportWagen TSI and the EPC light has been coming on every now and then over the last couple months along with stuttered acceleration. After watching your video and other videos, there's a good chance that it is a throttle body issue. I have no diagnostic devices, so I don't know for sure. I was planning on taking it back to the dealership for repair because we just bought the car. We bought it with around 4k miles and we don't have much more than 5k currently. Is it typical for throttle body's to fail with such low miles on the car? could it be a defective part? Thanks for any feedback you can provide.

    • @artanxhuli3309
      @artanxhuli3309 4 года назад

      I would suggest to check all fuses and doing a smoke check yourself. For the smoke check take a jar make some holes in the top and put in the jar a soldering iron together with some socks and mineral oil insulate , so you have some smoke . One site connect with air hose in the car (on the left in engine front) the other one blow some air in the jar through the tube. Take time and on the passenger site in the rear tire vw has the EVP system, take the tire and the molding around, watch if you have smoke! After that, check for the leak in the front of engine by air intake.

  • @fredburnsiv1230
    @fredburnsiv1230 Год назад

    I have a 99new vw beetle 2.0 5 speed manual and I spayed electrical connector kleener to the wires on The throttle body let it set and now the car bucks when I got it wide open to get on the highway and it is cable driven can u tell me why thanks

  • @user-sq6nz7rf6s
    @user-sq6nz7rf6s 7 лет назад

    Hello Friend I have a Passat 1.8 t 2012 There is a problem with the vehicle going downhill when in gear It seems to me a problem with the brake system is that you can help me ?? Thanks

  • @semirmerdzic923
    @semirmerdzic923 Год назад

    I know this is the old video but i have problem with my 2007 vw gti i got the code p1579 adaptation not started i tried 3 different throttle body and in field 4 i got error i swapped the engine harness same thing not sure but it makes me to think its the ecu i bought the car with rod tru block so if you can help me out that will be great or point what to do

  • @MalteaserMilly
    @MalteaserMilly 3 года назад +2

    Fantastic video! My beetle just threw up a p0411 code and it's the throttle body. The mechanic cleaned it and said it was still playing up and not working as it should so I've bought a replacement... I was interested in how it works and how you put it in.... This was extremely interesting

  • @loganfearns520
    @loganfearns520 3 года назад

    I have no error codes but when driving sometimes the car shuts off for a second and it’s as if it bump starts itself straight back on it’s like someone is slamming the brake pedal down for a split second ?. Also I have Rev hang sometimes and if I’m driving at a steady rpm and I let off the gas and give it a quick tap and let off again there is some hesitation before the revs decelerate am I right in thinking this could be the issue ?. Any help is appreciated thanks for reading guys 😁

  • @hanzqureshi9192
    @hanzqureshi9192 6 лет назад

    Love how easy it is to replace these things.. Also having vag com helps with a vw.

  • @micidutza
    @micidutza 8 лет назад

    Hello,i have watch your video,nice job,but in all internet o don't find some answers about this error code's: 00516 and 00668.All what i find out its that i dont have voltage on my throttle body,in the 4th gear and 5 gear,i can accelerate,its limited!please help me with some advices,thank you so much!

  • @flacostoy1
    @flacostoy1 9 лет назад

    how do i do a throttle body relearn. What is the normal RPM's on a 2006 nissan altima. I Repalced throtle body and my rpms are 1500 parked. Please comment.

  • @rustyshackleford4117
    @rustyshackleford4117 4 месяца назад

    Super helpful video, I'm hoping to accomplish the same test using OBDEleven on my 17 Golf R

  • @theblackmambaplague
    @theblackmambaplague 6 лет назад +4

    I’ve replaced my throttle body with a brand new continental one and I’ve done the tsb of the connection. I’ve cleared the codes and adapted the throttle body, but I keep getting p0221 and p0123.
    Runs good for about 2 minutes and then epc and esp lights come on.

  • @bobzak9508
    @bobzak9508 2 месяца назад

    New to VCDS...how do I find the group numbers for the VCDS? I own a 04 Volkswagen beetle and gave no throttle response. It shows it works on the system but it doesn't work my throttle body which is newly replaced and adapted...

  • @WorknB
    @WorknB 2 года назад

    Hey Humble Boy ,Im getting smarter every time I watch one of your vids .Kids keep bringing home every imaginable VAG product. We have an array of issues .But alas with your constant posting of material most of these issues I can make some good ground on to solving.
    Ahhh The power of YOU tube and the ability to access the knowledge . This time 18041 a whole new problem to look forward to. Good to have you helping me out. ☑

  • @sirernest7
    @sirernest7 2 года назад

    What if my gli runs better when its warm? Cold it tends to choke? Is that a sign for a cleaning?

  • @ahmedagha5605
    @ahmedagha5605 3 года назад

    Hi i have vw t5 2.5tdi 131 hp. Showing code p0122. But same time engine is smoks white when running whitout pushing gas pedal.. as soon as i hit the gas pedal smoks wanish .. can u help?? Please.....

  • @mohamedalsayaghi
    @mohamedalsayaghi 7 лет назад

    Dear. Eng, many thanks for your amazing videos.
    I have Touareg 2008 V6 FSI Engine...I have unstable rpm in ideal position... I tried to clean the Throttle but still the problem.
    Also when I turn on the A/C the RPM not increase.
    is the problem from the Throttle ?
    To be noted I change all spark plugs and the air filter and cleaned the mass air.
    I hope you can advise me

    • @StopTeoriomSpiskowym
      @StopTeoriomSpiskowym 4 года назад

      When you turn AC rpm grown. Probably potentiometr has worn out and on higher rev work better. Or pressure sensor of power steering broken. Switch off these pressure sensor and check. put some pencil lead on the potentiometer track.use adaptation of throtlle. Check idle speed switch into throtlle.

    • @mohamedalsayaghi
      @mohamedalsayaghi 4 года назад

      @@StopTeoriomSpiskowym many thanks for the reply, I will try to do it soon.. is it possible to share a video ?
      I appreciate your help 🙏

    • @StopTeoriomSpiskowym
      @StopTeoriomSpiskowym 4 года назад

      @@mohamedalsayaghi are you searching for answer on internet vw forums? you have FSI well. Its different story carbon build up on the valves, maybe you have too much of it. another High pressure fuel pump your fuel filter is clean? the pump work with oil (probably in yours too) at idle rpm injectors stream can not be correct (you must check in VCDS whats your fuel ratio when your problem happend).compresion is fine in all cylinders? . Another timing belt or timing chain to check. Sparks plugs to check. Coils too. Engine temperature sensor its vw failure. Leaking in intake mainfold. Lambda failure.

  • @guilhermerovida5488
    @guilhermerovida5488 4 года назад

    I'm gonna remove mine to clean, since I'm getting fault codes. But, I don't have Vagcom, I have OBDELEVEN though. Would you be able to show us how to reset the throttle body using the OBDELEVEN??? Thanks!!!

  • @mikede2331
    @mikede2331 Год назад

    I have a problem, if you see this and can help that would be great
    I have a mk5 golf gti 2L petrol
    Code misfire cylinder 1
    I sealed the cool with another same problem, I changes the plugs and took out and cleaned injectors and new seals,
    I cleaned the maf with maf cleaner spray, and this seemed to change it a little bit still happens and same code cylinder 1,
    I'm debating to buy new maf but I'll check the wiring first
    Any ideas what it could be?
    Sometimes but rarely it ideal a little high, use to atsll in hit starts somtiems that's gone snow,
    Still get this tho when I accelerate it's bogs out sometimes struggle to exellerege smoothly car somtiems jumpy

  • @richardwatts7604
    @richardwatts7604 3 месяца назад

    I have a 203 MK 4 golf 1,6 petrol sometimes when I am driving the car cuts out suddenly this sometimes happened more when the weather is worm outside , and sometimes it judders I have changed the spark plugs and the four silver tubes that attaches to the spark plugs, but the problem is still there could this be the Throttle body causing this issue?

  • @digitalblasphemy1100
    @digitalblasphemy1100 2 года назад

    I have a mk6 tdi and the cable on the side moves in and out at regular intervals every 3 seconds. I can’t figure out what the problem is but it stopped for a month and came back. It stutters in a particular rpm range like it’s running out of fuel but that throttle is moving back and forth no matter how I drive every 3 seconds. It’s got a check engine light on that is meant to be something about fuel system very general code

  • @crististancu4994
    @crististancu4994 Год назад

    HEey,I have Passat 1.4 tsi 122hp,my idle stay at 680/min,it is to small.I wood like to rise at 800,but i cant because the ecu ask me a code pin.I try it ,with 12233 or something like that but still no .Mechanics says that to this model tsi it is not possibile to change the idle?It is real?Only at diesel works?

  • @MIKECASTR0
    @MIKECASTR0 5 лет назад

    Charles, my daughter's 2005.5 Jetta needs a throttle body. 05-07 2.5 p/n 07K-133-062-B
    is twice the price of the 08-14 2.5 p/n 07K-133-062-A. They look identical except newer one doesn't have throttle body coolant line pipes. What do you think about using the newer one and bypassing throttle body coolant?

    • @MIKECASTR0
      @MIKECASTR0 5 лет назад

      So, it worked for me. 07K-133-062-A on a 2005.5 Jetta 2.5. Only $215 on Amazon: a.co/d/e6sPKB6

  • @MechanicTechnicianRepair
    @MechanicTechnicianRepair 7 лет назад

    amigo. tengo un. problem. 2007. AUDi A4. 2.0. liter. codes. p1545. me. Puede. ayudar grasia

  • @eddgiles
    @eddgiles 3 года назад

    Does ETCS reset refers to the throttle body reset that you were talking at the end of the video ??? Thanks in advance

  • @onememories8523
    @onememories8523 3 года назад

    How do you reset the throttle body WITHOUT the VCDS program ? This is for A4 B7. Please let me know. Thank you.

  • @rayvandenberg2161
    @rayvandenberg2161 5 лет назад

    I'm having problems with my throttle body freezing up on me in my 08 A3. It's been -20'C in Ontario for a week. Only have issues first thing in the morning. Starts fine but goes into limp mode because the throttle can't move. I get a P2101 code. Once it warms up a bit the car runs fine. Any ideas on where this moisture is coming from?

    • @dale116dot7
      @dale116dot7 Год назад

      Generally it comes from the crankcase ventilation although it can accumulate with operation below freezing and with humid air. If you do short trips and don’t get that oil hot enough to boil off any moisture this can happen.

  • @DailyRitualW4r10ck
    @DailyRitualW4r10ck 8 лет назад

    Hey Charles, I have my mk 6 gti and I just changed my PCV which was whistling; but now mt check engine light came back on with an error code of P0507. My first thought was vacuum leak or throttle body failure. What do you think it could be?

    • @HumbleMechanic
      @HumbleMechanic  8 лет назад

      Probably a vac leak. Check the nipple on the little pipe at the back of the PCV. I have seen that break and you don't realize it.

    • @DailyRitualW4r10ck
      @DailyRitualW4r10ck 8 лет назад

      HumbleMechanic OK cool.

    • @DailyRitualW4r10ck
      @DailyRitualW4r10ck 8 лет назад

      +HumbleMechanic thanks. my GTI has been a labor of love and I'm hoping its not the throttle body.

  • @ezattablo9108
    @ezattablo9108 6 лет назад

    hello
    I have oil come from the throttle body Passat 2008 is this normal

  • @brunodiaz98
    @brunodiaz98 8 лет назад

    Hello, I have Jetta 2.5 lts 2010 and I have problems with the fault code P0106. I take the car to VW dealear and they change the MAP sensor. But I have 3 times the same symthoms and allways the VW dealer told me the clean de MAF, but know I need to change the Throttle Body and a presion sensor.
    The symthoms are:
    The car likes to hesitate whenever I have the gas pedal
    The engine has shut off while driving and I lost all power when I stop in a singnal,
    I got a chck eng light on.
    The VW dealer told me to change the 07K133062A, 03C906051F.
    Thanks

  • @mohamadholwa4876
    @mohamadholwa4876 7 лет назад

    Hi, I have a car vw passat 2006 and in erorr number P2100 I did change the Throttle Body wiped the mistake, but unfortunately the fault still exists. The car is working perfectly and the engine lampe is still Lights up, HELP HELP HELP
    MOH

  • @Xantylon74
    @Xantylon74 4 года назад

    I disconnected the Battery while i was working on the seat. Later i connected the battery and a think i heard the throttle in learning mode for 30 sek or something. Does this mean i have self programming throttle?
    It's a 2005 Beetle Convertible with a 1.6 BFS Engine. Thank you and Greetings from Germany!