I have problem with EPC during the driving randomly turns on EPC light and put my car in safe mode, i read that the throttle could be a problem. When i turn off car and turn on again the car goes normally and no EPC light.
Before we start the engine, do we need to do calibration of the new TB, or we need to see jf the TB gives that sound after the igniton is on and than we do calibration?
My engine is AKQ 1.4 16V, and the ECU doesn't give an option of reprogramming, it's locked. I've bought other throttle body and now I can't do the calibration to see if this will work too.
No, the problem I had was that the motor had failed inside the throttle body and the engine wouldn't idle when it was cold and it would stall. You had to rev the engine until it warmed up a bit before it would idle properly.
so no cleaning of old throttle body(this would of corrected problem after calibration) no cleaning of top of valves while old throttle body was off so all the carbon build up will force the new throttle body to adjust to its limit and you will have the same problem again
Thank u bro,you the only one show wright way to remove that part on engine
Excellent video, very helpful.
Thanks for watching !
Perfect video . Thanks . I will do it as soon as possible
Thanks for watching !
I have problem with EPC during the driving randomly turns on EPC light and put my car in safe mode, i read that the throttle could be a problem. When i turn off car and turn on again the car goes normally and no EPC light.
I'm not too sure. Check this link: gunthervwdelray.com/volkswagen-epc-light.htm
Super video!
Thank you !
Great video
Cheers !
Very nice video👍🏼
Thanks very much ! :)
Hello. Have you done an update. and is it mandatory to do the update in any case thanks for the video
Before we start the engine, do we need to do calibration of the new TB, or we need to see jf the TB gives that sound after the igniton is on and than we do calibration?
In most cases the throttle body will need to be reprogrammed: vehiclefreak.com/does-a-new-throttle-body-need-to-be-reprogrammed/
My engine is AKQ 1.4 16V, and the ECU doesn't give an option of reprogramming, it's locked. I've bought other throttle body and now I can't do the calibration to see if this will work too.
Thank you!!!!
You're welcome !
would this work on a 1,6 16v mk4?
It should be very similar on the 1.6L
Before you fixed this golf, when it idled was it lumpy/ rough and did you have a weird putting noise coming from the exhaust?
No, the problem I had was that the motor had failed inside the throttle body and the engine wouldn't idle when it was cold and it would stall. You had to rev the engine until it warmed up a bit before it would idle properly.
Does the throttle body need to be relearned?
Yeah they usually need to be reprogrammed
Good vid
Thanks !
Do you have the wiring diagram for your tps? I broke my connector and i dont know which pins the wires go to
I don't, sorry
hello do you have any mail to ask you about my vw polo 2001 and your acceleration body please help me!!!
Hi, What's the problem with it ?
Please my golf is not accelerating please what should I do
There could be a lot of reasons. This link might help: oards.com/causes-car-wont-accelerate/
No need to make throttle body adaptation?
The accesibility of this model is like 10 times better than on my seat ibiza. I have no idea how to remove the three screws holding the throttle.
Nope, you looking at the wrong model, my ibiza has the exact same setup ;)
How much for anew body throttle
You should be able to gbuy one from Ebay for about £50.00 like this one: www.ebay.co.uk/itm/284181305894?
شكرًا Good
Thank you ! :)
so no cleaning of old throttle body(this would of corrected problem after calibration) no cleaning of top of valves while old throttle body was off so all the carbon build up will force the new throttle body to adjust to its limit and you will have the same problem again
I changed the throttle body because the idle control motor was dead on the old one.
Good jop thanks
Thanks for watching ! :)
P