Daughters Polo starts to seem if its cutting out when you blip throttle it regains power, has cut out before and when restarting seems ok. Any ideas ??
0:14 Weird,I dont have a hose right there on my polo.Its just that hole without a hose (3 years ,never noticed)why is that? And no its not lying around somewhere.
Hi mate, great video. I have a 9n Polo (2005) and in the last few months it has developed a weird fault. When pressing on the accelerator and letting off there's quite a severe bucking or jerking, it feels like the engine is rocking back and forwards twice when letting off the accelerator, the idle is also lumpy and feels like It's going to stall. Could this be my issue with the throttle body? There's no codes stored apart from a steering angle sensor fault that is archived, and no EML. It's been in to a garage and they said there's nothing wrong with it. Cheers!
Hi i did clean the throttle body but after i drive it for few kilos its doing the very same thing again what could be the problem cause now it looses power
hello , curious about why my vw polo ' s pcv hose connect to the throttle body , not to the air intake housing like yours (for your info i just bought my car from the used car seller) is it ok or i need to put it back to the intake ? thanks
Hey All I have been battling with my 2005 Polo 1.6 (9N3). It starts immediately (with accelerator pressed I always start it like this). It will idle fine with no problem but as soon as I release the accelerator it idles funny for few seconds and then switches off. I took it to a local mechanic and he did a full service ( spark plugs, oil and air filter, oil change) and I also replaced the battery but the problem still persists. Please help It has had this issue for months now and have lost the joy of owning a car.
Does it only happen the first time you start the car or does it also happen when the engine is warmed up ?. Lift the bonnet and turn the key to the 'On' position. Can you hear the throttle motor working for a second or is it silent ?
@@screwsnutsandbolts it happens all the time . Whenever I release the accelerator I literally have like +- 4 seconds before the engine cuts off (before that it will run funny)
My 2003 polo is showing error codes saying throttle body problems, goes into limp mode and sometimes misfired. Then it can run ok for weeks. Would this cleaning help?
My 06 Polo 1.4 9N been having an irregular idel. I'm so glad to find your video!
Hello! did cleaning the TB like in the video help fixing your idle problem? Thanx...
Thank you! Used this video to clean mine, worked a treat.
My intake manifold is very very dirty though, that will be next in the list to clean
Great job :-) is the battery healthy ?
Daughters Polo starts to seem if its cutting out when you blip throttle it regains power, has cut out before and when restarting seems ok. Any ideas ??
hello! Can you make a video and show us how you clean the intake manifold?
0:14 Weird,I dont have a hose right there on my polo.Its just that hole without a hose (3 years ,never noticed)why is that? And no its not lying around somewhere.
Hi mate, great video. I have a 9n Polo (2005) and in the last few months it has developed a weird fault. When pressing on the accelerator and letting off there's quite a severe bucking or jerking, it feels like the engine is rocking back and forwards twice when letting off the accelerator, the idle is also lumpy and feels like It's going to stall. Could this be my issue with the throttle body? There's no codes stored apart from a steering angle sensor fault that is archived, and no EML. It's been in to a garage and they said there's nothing wrong with it. Cheers!
..the point of his video is how to clean the TB.. are you going to do that and tell us the result?
I'm having this problem now🤦🏿♂️
Clean your throttle body and map sensor, likely that is the issue
Hello. I have a 2011 Polo. I will do the same thing. If we disconnect the battery, we don't need to calibrate it, right?
That is same sounds, i have onto my car
Hi i did clean the throttle body but after i drive it for few kilos its doing the very same thing again what could be the problem cause now it looses power
There's a few causes of power loss. Check this link: gumout.com/causes-of-power-loss-and-how-to-fix-it/
Can i open that flip when cleaning the throttle body?
You may have to re-adapt the throttle body if you do. Check out this video: ruclips.net/video/YiOtKbj75Hk/видео.html
hello , curious about why my vw polo ' s pcv hose connect to the throttle body , not to the air intake housing like yours (for your info i just bought my car from the used car seller) is it ok or i need to put it back to the intake ? thanks
Depending on the engine type it may be different. What year and engine size is your Polo ?
@@screwsnutsandbolts its a 2005 vw polo 1.4 code BBY
Hey All
I have been battling with my 2005 Polo 1.6 (9N3). It starts immediately (with accelerator pressed I always start it like this). It will idle fine with no problem but as soon as I release the accelerator it idles funny for few seconds and then switches off. I took it to a local mechanic and he did a full service ( spark plugs, oil and air filter, oil change) and I also replaced the battery but the problem still persists. Please help It has had this issue for months now and have lost the joy of owning a car.
Does it only happen the first time you start the car or does it also happen when the engine is warmed up ?. Lift the bonnet and turn the key to the 'On' position. Can you hear the throttle motor working for a second or is it silent ?
@@screwsnutsandbolts it happens all the time . Whenever I release the accelerator I literally have like +- 4 seconds before the engine cuts off (before that it will run funny)
It sounds like it could be a dirty or faulty throttle body, but it's hard to say
Can a throttle be cleaned while raving the car?
My 2003 polo is showing error codes saying throttle body problems, goes into limp mode and sometimes misfired. Then it can run ok for weeks. Would this cleaning help?
It sounds like it could be an issue with the throttle body position sensor but I can't be sure. You may need to have a mechanic check it out.
Hi i cleaned my throttle body and my engine light came on. Cleared it once but came back again
Did you disconnect the battery before removing the TB ?
@@screwsnutsandboltsif he doesn’t remove the battery, now he must connect to the computer and calibrate the TB.
Не устоичивая работа двигателя , я бы почистил и форсунки ....