I bought one of these just a few days ago, here in England. I am really enjoying sewing with it, great machine, feels really well build, solid, and sews a great stitch
@@DnB-BMX one time I got a machine, the pedal worked on and off, I thought it's the pedal problem, but later found out there was a loose wire connection on the power circuit. So, I suggest you check all the wire connector first. Good luck!
@@catsam1429 This sounds a bit familiar, to get the pedal to operate the machine I have to hold the "airline plug" onto the machine and as soon as I let go the airbulb gets stuck and seems to create uneven pressure, was actually hilarious!! My 10 year old suggested that it could be an airpump as I was stood with my multimeter in the airline, he brought a small section of plastic tube, he connected it to the machine, blew in the end and the machine started operating perfectly, It was a moment!!!
@@DnB-BMX That's exactly like mine. This is what I did: disconnected the power, removed the bottom cover, there were 3 or 4 wire connectors( I think), I pushed them in one by one, and secured the connection, it works well after.
You can remove the top cover, on the upper left, there is a thing which control the widths of the zig zag, by adjusting that it can also change the needle position.
1. Raise needle to highest position. 2. raise presser foot. 3. open slide plate. 4.drop in an empty bobbin with black rings facing up into bobbin case. 5.select the straight stitch. 6. thread the machine as the video show, and bring thread from needle , under presser foot and wind it one turn around the presser foot screw. 7.half way close slide plate with the two triangle marks lining up. 8. press the foot control to wind the bobbin.( Do not allow thread to wind beyond the outside FULL ring.
@@kimphungo3854 There are many cause that, I can't answer your question without put my hands on your machine. I found this article may help you: sewingsociety.com/why-is-thread-bunching-up-underneath-my-fabric-while-i-sew/
I bought one of these just a few days ago, here in England. I am really enjoying sewing with it, great machine, feels really well build, solid, and sews a great stitch
Salam qiymətini bilmey istərdim
Gracias! Acabo de adquirirla y no sabía como llenar elcarrete.me ayudó mucho tu vídeo.Gracias
Hi. I'm from Malaysia. I got this machine model no 6235 but the back gear for feed dog is broken . Where can I get the parts.
@@tankweechoo4655 I don't know about Malaysia, but here in the US, you can find it on Amazon, eBay, AliExpress...
Can you tell me how to oil this machine? It doesn’t seem to have a cotton wick like other machines.
Manual says not to oil it. Had mine since 1985 and never needed to oil it.
Paylasiminiz icin tesekkurler keske bu makinanin diger ayarlarinida anlatsaniz
I have this machine which is great but the reverse button want work just sews backward. Can it be fixed easily.
Does this one have the air pressure foot pedal?
Yes
@@catsam1429 really interesting design, got one of these today with hopefully just a faulty pedal, any recommendations on spares?
@@DnB-BMX one time I got a machine, the pedal worked on and off, I thought it's the pedal problem, but later found out there was a loose wire connection on the power circuit. So, I suggest you check all the wire connector first. Good luck!
@@catsam1429 This sounds a bit familiar, to get the pedal to operate the machine I have to hold the "airline plug" onto the machine and as soon as I let go the airbulb gets stuck and seems to create uneven pressure, was actually hilarious!! My 10 year old suggested that it could be an airpump as I was stood with my multimeter in the airline, he brought a small section of plastic tube, he connected it to the machine, blew in the end and the machine started operating perfectly, It was a moment!!!
@@DnB-BMX That's exactly like mine. This is what I did: disconnected the power, removed the bottom cover, there were 3 or 4 wire connectors( I think), I pushed them in one by one, and secured the connection, it works well after.
Hi! I have got the same from my mother 😊 who knows what is the hole on the top of the machine? Is it maybe for the second thread for a twin needle?
@@vivianaargento1613 yes, you are right.
@@catsam1429 thank you!!
Tengo una nesesito el porta bobina y la bobina donde los vende
www.sewingpartsonline.com/
Super merci
Cómo puedo centrar la aguja
You can remove the top cover, on the upper left, there is a thing which control the widths of the zig zag, by adjusting that it can also change the needle position.
@@catsam1429 muchas gracias dios te bendiga siempre saludos
Como puedo hacer ojales
6:45
My sewing about 36 yrs old ,bobbin shaft is broken 😭
Cách cuộn chỉ vào suốt như thế nào ạ?
1. Raise needle to highest position. 2. raise presser foot. 3. open slide plate. 4.drop in an empty bobbin with black rings facing up into bobbin case. 5.select the straight stitch. 6. thread the machine as the video show, and bring thread from needle , under presser foot and wind it one turn around the presser foot screw. 7.half way close slide plate with the two triangle marks lining up. 8. press the foot control to wind the bobbin.( Do not allow thread to wind beyond the outside FULL ring.
Cảm ơn bạn rất nhiều... Máy may loại singer 6235 thừa và bị rối chỉ dưới thì làm thế nào để khắc phục ạ? Giúp mình nhé!
@@kimphungo3854
There are many cause that, I can't answer your question without put my hands on your machine. I found this article may help you: sewingsociety.com/why-is-thread-bunching-up-underneath-my-fabric-while-i-sew/
لو سمحت اريد معرفة عيار الدرزه العاديه
5/8"?@@sawsanalmasalmeh1792
What is the price if I like to buy it thanks 🙏
This one has been sold.
À vérité j'abondonne pour reliée la canette au fil.
لقد اشتريت واحده وجد صعوبه بستخدامة
الإبرة لا تجر الخيط
I agree