Point five of the Australian constitution states you entitled to a fair price for your product . I Pray for your safety , for your heath and against fires and flood , Rejoice in Jesus name . Amen
That drone reminds me of the chopper mustering except of course your not going up and down and around and around like loonatic. You would think that they use it to muster today you would probably not have to leave the big house❤😂🎉😢😮😅😊
Great job lads ! bit of luck it’ll be a dream harvest lots of drone shots so we can sit back and watch you hard at work 😂 Jd might even have a camera with him this year 😂😂😂all the best from Tassie
Got my hat today thanks Matt...all best for harvest...I enjoy your work, along with a few Nrth USA channels...I'm a Kiwozi, enjoy seeing contrasts in weather and dirt between countries
I’m still a diehard Rigid industries fan. Once you’ve seen how bright and well patterned they really are it’s hard to buy the cheap stuff. A 40” dual row dual pattern spot/driving bar will turn night into day.
Good job again but sometimes I wish to have an old fashioned bonnet that would have been more easy to work around fhe engine with it's related accessories instead of the new one piece bonnet!
Good to see the CAT back in action! Love the channel and thanks for the hat also! :D If you ever see any of the Brown's in town, tell them Jake said G'day haha.
Is that a barley crop? Looks a bit light but we don’t see all of it? 10 -12 bags maybe? 3/4 tonne /ha? Bit hard doing the drone estimate. On the cat, Might be worthroughing the inside of the crack and putting a fibreglass patch on while it is clean, drill a small hole in each end because the vibration might cause it to run. It would only take a few minutes. Plastic headlights can be cleaned with brasso to remove scratches but the plastic might be brittle.
As always great video again thanks Matt. Looking forward to seeing how the harvest turns out. Can I ask why you where lifting the back of the challenger up with the big fork. What was going on there?
Can you tell me about the aftermarket precleaner your set up on the CR? We run a weed mill and I have to clean the air filter twice a day. A precleaner might make life easier
Tiger lights makes led lights that replace the ones in the hood. Not sure if they sell to Australia or not. I believe they are the same as the ford new holland genesis tractors
Just put a light bar on the roof of the cabin and good to go, sure would love to come and help, as a lad in Tasmania we all helped each other with the harvest. Mainly hay bailing or shearing but we made sure it all got done as a community should.
Well done on getting the challenger back in service, I’m sure I’m not the only one who has fingers crossed that it doesn’t play up on you during harvest. Hoping you have a great harvest, hopefully uneventful… thanks again for posting.
Guess you know Warren, Western truck and tractor repairs . youtube. He did engine swap on a Challenger, reco from Cat. Road test new engine loose camshaft, trailered back to workshop. Whole thing was messy. Good luck with yours and the harvest, enjoy your stuff, play on.
If you mean the video series from a couple of years ago that was a JD 9620t. it was on it's 3rd reman engine (plus original) by the time Warren saw the back of it.
Well done boys...feeding the world..
All the best for harvest guys. Hope breakdowns are minimal this year
Good luck with harvest boys.
I always envisioned Bradley's family car as a mini-van with some boy racer rims and a fart pipe exhaust with a chrome tip on it
Put Mighty Car Mods to work for collaboration videos
Surly CAT can send you a few sets of ute mudflaps and a new headlight to 'test' 🤔🤔
All the best with harvest team
Point five of the Australian constitution states you entitled to a fair price for your product . I Pray for your safety , for your heath and against fires and flood , Rejoice in Jesus name . Amen
Come on Matt, all the time that tractor has been sitting there, um ya could'a done your lights properly 😂😂. Great video again
😂😂
That drone reminds me of the chopper mustering except of course your not going up and down and around and around like loonatic. You would think that they use it to muster today you would probably not have to leave the big house❤😂🎉😢😮😅😊
Great prep work. All the best with harvest.
Great content. Good luck with harvest hope it's a good yield
Good morning from Texas
Morning!
Drone shots of harvest with the music you play hits you right in the feels.
Great job lads ! bit of luck it’ll be a dream harvest lots of drone shots so we can sit back and watch you hard at work 😂 Jd might even have a camera with him this year 😂😂😂all the best from Tassie
I got a new drone a couple days ago so hopefully I don’t disappoint👍😁
Best of luck with harvest
I'm glad Brad knows where he stands with the Jeep. Good to see the harvest has started shouldn't be any bogged Headers this year
Here's wishing you folks a bountiful harvest.
Let's see how it all goes.
Thank you for sharing
🇺🇲💪🙏🤗
Nice to know it's still a goer. Thanks
Good job guys
Time to break in those new track's
Can't wait for this harvest for you guys😊!
Got my hat today thanks Matt...all best for harvest...I enjoy your work, along with a few Nrth USA channels...I'm a Kiwozi, enjoy seeing contrasts in weather and dirt between countries
Awesome! Cheers😁
You'll be up to your eyeballs in it by now guys. I hope all the weeks of prep are paying off and nothing too serious goes bang!
Going well so far👍😁
Hey Matt how many tonnes of wheat can the hopper on the header hold. Great Video Mate
I think it’s nearly 11t standard and the big top ads another 2.5 I think👍😁
Was that wheat or barley you had a nibble at there Matt ?
Wheat👍 must of forgot to say on the video😁
"5k for two lights" .......heavy equipment costs never cease to amaze me.
Hi Matt, what year is the Commer Maxiload i have seen in your videos and is she still in use please?
I can’t remember🤔 it still gets used fairly regularly at planting and harvest😁👍
Yeah!
I’m still a diehard Rigid industries fan. Once you’ve seen how bright and well patterned they really are it’s hard to buy the cheap stuff. A 40” dual row dual pattern spot/driving bar will turn night into day.
Hey Matt love the videos how many acres do you farm
Currently farming about 2700hectares👍😁
Another awesome video guys.
From kiwi land.
Good job again but sometimes I wish to have an old fashioned bonnet that would have been more easy to work around fhe engine with it's related accessories instead of the new one piece bonnet!
thank you guys for keeping us fed. as always enjoy watching what ever is going on , on the Farm. Happy Harvest season :)
The Challenger has been a bit of a challenge but you saw the light at the end, eventually.🙃 Great job as always fellas.🤎 The Ole Fella greg
Maybe if you didn't make Brad carry the heavy end of everything he might not of been so tired and not dropped that hood!
Nice work men , bugger about the bonnet but it could always be worse, be safe
A local farmer once told me "when you think the crop is ready, you then go on holiday for two weeks"
Great to see the Challenger up to a harvest season 🤞🏻👍🏻🏴
Would love to work there,great atmosphere and love the farm.
Good luck and have a GREAT harvest!
All systems go hope you guys have a great harvest cheers boys
Good to see the CAT back in action! Love the channel and thanks for the hat also! :D If you ever see any of the Brown's in town, tell them Jake said G'day haha.
Cheers mate!
Is that a barley crop? Looks a bit light but we don’t see all of it? 10 -12 bags maybe? 3/4 tonne /ha? Bit hard doing the drone estimate. On the cat, Might be worthroughing the inside of the crack and putting a fibreglass patch on while it is clean, drill a small hole in each end because the vibration might cause it to run. It would only take a few minutes. Plastic headlights can be cleaned with brasso to remove scratches but the plastic might be brittle.
It’s a wheat crop, I must of forgot to mention it in the video👍 it was doing about 4t/ha 👍
Matt you’re beard needs a little maintenance.Good luck for the harvest
All the maintenance effort has gone to the machines😂
As always great video again thanks Matt. Looking forward to seeing how the harvest turns out. Can I ask why you where lifting the back of the challenger up with the big fork. What was going on there?
Thanks! We were aligning the drive wheel for the tracks👍😁
Can you tell me about the aftermarket precleaner your set up on the CR? We run a weed mill and I have to clean the air filter twice a day. A precleaner might make life easier
It’s a turbo 2 pre cleaner, seems to work well, just needs a bit of modification👍
Tiger lights makes led lights that replace the ones in the hood. Not sure if they sell to Australia or not. I believe they are the same as the ford new holland genesis tractors
I had checked them out and they are for the 55 challengers which were similar to the genesis series🤔
Just put a light bar on the roof of the cabin and good to go, sure would love to come and help, as a lad in Tasmania we all helped each other with the harvest. Mainly hay bailing or shearing but we made sure it all got done as a community should.
I was a bit quick off the mark with my light bar comment.
I think that those LED lights will light up the whole area ahead of you. Good luck with the harvest guys! Thanks for sharing. 😊
Awesome teamwork
U do a good job
Well done on getting the challenger back in service, I’m sure I’m not the only one who has fingers crossed that it doesn’t play up on you during harvest. Hoping you have a great harvest, hopefully uneventful… thanks again for posting.
Guess you know Warren, Western truck and tractor repairs . youtube. He did engine swap on a Challenger, reco from Cat. Road test new engine loose camshaft, trailered back to workshop. Whole thing was messy. Good luck with yours and the harvest, enjoy your stuff, play on.
This is Australia mate !
No reman just good honest engine rebuild!😏
If you mean the video series from a couple of years ago that was a JD 9620t. it was on it's 3rd reman engine (plus original) by the time Warren saw the back of it.
Praying for everyone a safe and record harvest thanks for sharing everything with us