Great video. Parts look awesome. I get the sense though that the B74 and other new 10th scales are meant to only be driven on carpet and other clean type indoor tracks and not loose dirt outside tracks. That if you want dirty go to 1/8 scale it seems to me.
so picture this... when you for instance would lift up your buggy of the ground holding it with one hand under the chassis in the air. when you would press the left or right wheel and swing arm all the way up it would force the sway bar to lift the opposite side up as well.. the thicker the swaybar the more it would help the opposite wheel and swing arm to move up. By doing so it means that if you would corner hard on a high traction surface the weight of the buggy would pull it to the opposite side..for instance if you would turn hard left it would lay over to the right and the left shock would be all the way extended compressing the right shock to the ground. what the sway bar does then is also lifting the opposite side then making the buggy flatter in a hard corner instead of leaning hard over to the opposite side of the turn making it less likely to roll over (traction rolling) obviously sacrificing a bit of traction but handling easier. its more commonly used on astro and carpet tracks
Looks good bro and good for you getting your ideas in to this fuck these little things are just like a real race car to funny its all the shit I go threw lol I just cant over how much you guys do to set these things up
Spencer I have a hobbywing 6.5 turn motor I am having trouble getting the wires and solder to stick to the motor tabs. What can or do I need to do to get the solder and wires to stick to the motor tabs? Aaron
Hey Spencer, I really liked your video! Do you run the steering rack on both carpet and dirt? And also, I like the decals on your bodies, may I ask who made them for you?
I tried to turn on the notification bell, and RUclips says “content made for kids” doesn’t allow this. I’m 43, and would like to know when you post vids. Any help with this would be appreciated.
I wasn't aware of that centering feature with the brace and rack combined. Cool idea!
thank goodness the B74.1 will come out with this standard.
Great video. Parts look awesome. I get the sense though that the B74 and other new 10th scales are meant to only be driven on carpet and other clean type indoor tracks and not loose dirt outside tracks. That if you want dirty go to 1/8 scale it seems to me.
Spencer on a 4wd buggy, I am trying to better understand how the front and rear anti roll/swaybars help the suspension and traction.
so picture this... when you for instance would lift up your buggy of the ground holding it with one hand under the chassis in the air. when you would press the left or right wheel and swing arm all the way up it would force the sway bar to lift the opposite side up as well.. the thicker the swaybar the more it would help the opposite wheel and swing arm to move up. By doing so it means that if you would corner hard on a high traction surface the weight of the buggy would pull it to the opposite side..for instance if you would turn hard left it would lay over to the right and the left shock would be all the way extended compressing the right shock to the ground. what the sway bar does then is also lifting the opposite side then making the buggy flatter in a hard corner instead of leaning hard over to the opposite side of the turn making it less likely to roll over (traction rolling) obviously sacrificing a bit of traction but handling easier. its more commonly used on astro and carpet tracks
Can you do a video building 1/8 shocks, bladder vs. emulsion?
Looks good bro and good for you getting your ideas in to this fuck these little things are just like a real race car to funny its all the shit I go threw lol I just cant over how much you guys do to set these things up
so sick!
What turnbuckles are you using on the buggy?
Awesome dude, I love it!
I Always listen closely to Spencer's videos, need all the help I can get, lol!
I assume this upgrade will transfer to the B74.1?
Spencer I have a hobbywing 6.5 turn motor I am having trouble getting the wires and solder to stick to the motor tabs. What can or do I need to do to get the solder and wires to stick to the motor tabs? Aaron
Hey Spencer, I really liked your video! Do you run the steering rack on both carpet and dirt? And also, I like the decals on your bodies, may I ask who made them for you?
Yes I run them on both surfaces. Thanks man, Stickit1Racing does my stickers.
@@spencerrivkinracing awesome, thanks for the reply!
Will there be a black version available in the future?
As far as I know, no
will they make a black version?
No
Spencer which motor do you prefer, the reedy sonic or the reedy sonic s+plus? and why?
I prefer the Hobbywing G3 Motors. Hobbywing has the latest and newest Technology over everyone on the market
@@spencerrivkinracing do they have more punch and acceleration
Oh definitely!
Being that you are a team associated Driver I am gonna stick with y'alls motors at team associated and support you and the company you drive for.
Spencer what pinion gear do you recommend for reedy sonic 540-m4 9.5turn motor
Probably a 20 or a 21
@@spencerrivkinracing would it be the same for a 7.5t brushless motor?
I tried to turn on the notification bell, and RUclips says “content made for kids” doesn’t allow this. I’m 43, and would like to know when you post vids. Any help with this would be appreciated.
Does it work with the B64 also?
No sir.
What turnbuckles are those
Jconcepts:)
Id swipe my CC for that if it was black
Great. What's this going to cost me!?!?!
no puppy.. click bait haha
Exotek hat das bereits