Absolutely stunning gains… Great work! Have you played with the timings on the NEI SK chips at all? That GPU boost from the RAM clocks is awesome, and likely comes with minimal power consumption gains compared to CPU/GPU. Any chance you could test out Fallout 3/New Vegas through Box86 with GL4ES? Just got my switch and ordered my RAM chips and mod chip. Will need to look into custom kernel like you, I wonder if we can add more dynamic stepping for CPU and tweak vCore. These older NM chips probably have good margins for voltages.
Timings used : 491 - 414544587 I probably won't do more video on Box/Wine emulation It’s not mentioned in the video, but the LUT table was increased from 33 to 63 in the kernel used here. This allows for finer voltage steps This feature should be available if 5.2.0 is ever released
Thanks for the info! I'll look into the switchroot discord and wiki to see how to change the max frequencies before building. Thanks again! Definitely earned a sub :D
Hella interesting, keep up the hard work brother.
Absolutely stunning gains… Great work!
Have you played with the timings on the NEI SK chips at all? That GPU boost from the RAM clocks is awesome, and likely comes with minimal power consumption gains compared to CPU/GPU.
Any chance you could test out Fallout 3/New Vegas through Box86 with GL4ES?
Just got my switch and ordered my RAM chips and mod chip. Will need to look into custom kernel like you, I wonder if we can add more dynamic stepping for CPU and tweak vCore. These older NM chips probably have good margins for voltages.
Timings used : 491 - 414544587
I probably won't do more video on Box/Wine emulation
It’s not mentioned in the video, but the LUT table was increased from 33 to 63 in the kernel used here. This allows for finer voltage steps
This feature should be available if 5.2.0 is ever released
I though the Ninjas had found him with the length of his hiatus...
My fav channel
can you plug in a egpu and see performance in games?
the cpu is the main bottleneck with running stuff, a bigger gpu won't really help
I have H9HCNNNCPMMLXRNEI modules in my oled. what ini settings u have for 3200mhz on ubuntu?
And where do i adjust the CPU GPU SOC speedo?
How do you overclock past the max of 2397 CPU and 1228 GPU? I've tried messing with the NVPmodel file and it won't go past the set max :/
@@ethansnyder5515 you need to build a custom kernel
Thanks for the info! I'll look into the switchroot discord and wiki to see how to change the max frequencies before building. Thanks again! Definitely earned a sub :D
Naga what version of Linux do you use in the video nobleKde or Jammy please ??
Bionic
make sw lite vibrate, please...
can you do yakuza kiwami overclocked to the highest gameplay with uncapped fps on switch (via the switch software not linux)
He won’t
Babe wake up naga posted
Is it safe to overclock Ram to 3200 MHz?
Yes as long as you use a safe voltage and have a high enough SoC Speedo to handle it
Can oc the display? Or lower
Yes there is software for that however ive never managed to get it to work over 62hz
Around 64Hz max on OLED 45/50Hz is working, probably a bit higher on Lite / v2
Please test Yuzu
Snapdragon 845 gets 529 and 1728 on GB6, impressive
The cpu score is good but gpu is shit.
@8bitchiptune420 impressive for a 2015 low tdp soc, monky
Other way around@@8bitchiptune420
BRO WAKE UP NAGA POSTED A VIDEO
Please come gta v in open world session
please mr naga how i can make nintendo switch like this
4! Shout out meee