Cardo's Shoei Helmet Adapter Installation Guide
HTML-код
- Опубликовано: 15 окт 2023
- Welcome to Cardo Systems' step-by-step installation guide for our Shoei Helmet Adapter. In this video, we'll walk you through the seamless process of attaching your Cardo communication system to your Shoei helmet. With compatibility for Edge, Neo, and Custom devices, this adapter ensures you can stay connected. Get ready to enhance your riding experience. Let's dive in and get you up and running in no time!
Disclaimer:
Please note that the bundle offering mentioned in this video is subject to change from time to time without prior notice. We strive to provide accurate and up-to-date information, but the availability and details of bundle offerings may vary due to factors beyond our control, such as supplier changes, market conditions, and other unforeseen circumstances. Therefore, we recommend checking the latest updates on our website or contacting our customer service for the most current information regarding bundle offerings. Thank you.
🌐 Website: www.cardosystems.com/shop/pac...
📸 Instagram: cardosystem...
👍 Facebook: / cardosystems
🎥 TikTok: www.tiktok.com/@cardosystems?... 
Авто/Мото
![MAF Teeski - Whole Thing (feat. VonOff1700) [Official Music Video]](http://i.ytimg.com/vi/SHWEj-ndz6g/mqdefault.jpg)
We need this for the Neotec 3. Please Cardo.
Whatever you do with the Neotec 3 or other helmets, try experimenting with more robust tabs that snap in like the original rather than an adhesive and see how that works.
Very nice, but why use tape, and not plastic tabs to insert into the cover it replaces?
my thoughts exactly, what a let down. Just make a piece that slides into the fitting with the mount. Probably something to do with proprietary designs ect ect
Not a fan of the stick on option. I can't see why Cardo didn't make an adapter that uses the SRL2 connector. Surely that would be cheaper, be more solid and easily removable? I've just followed another RUclips video and got an actual clip-on adapter 3D printed and it is perfect. Video is called "Attaching a Cardo Packtalk Edge or Bold to a Shoei GT Air 2 or Neotec using Sena SRL2"
Agreed. I did 3D as well. ruclips.net/video/u1SiGgiQgig/видео.html
Probably protected design with clips etc so have to use the adhesive 🤔
Thanks man definitely checked out that video and will be doing the same
@@jameshill9410 Good luck finding the stl file, it's nowhere to be found any more 😢
at that point i'd just buy the sena instead 🤣
An adapter for the Freecom/Spirit would be even more great!
Are you guys developing an adaptor for the GT Air 3?
Currently I have an Arai TX-4, but I thought about getting a Shoei Neotec 3 for Christmas. I really love my Packtalk Edge and it would be nice to have something like this for the new Shoei series.
Another helpful video Mike, thank you.
Interesting. Was wondering how this worked. Seems like a little more effort could have been put into it to make it just clip into the helmet like the cover did rather than using adhesive. Even if it cost a little bit more I think it would be a better option.
It would be good if you did a mount for the Spirit HD, not just the more expensive models.
Not all of us require mesh as we ride by ourselves or with just a pillion.
My wife gave me a gift, Shoei GT-AIR II and I decided to change my intercom to their original one (Which is Sena) after 3 days of use, I sent it back and installed my good-old Cardo Freecom 1 to my helmet. I'm more than happy now! But it's good to know this option. If I'll buy a new one, I'll use this mount.
How did you install the freecom? Where did you place it?
Nice! Just make one more for the GT air 3!!
Got mine love it:)
Where can we expect this for the new Neotec 3 and GT-AIR3? Given they were just released, I would hope that adapters for these would also be relased. I understand you realeasing these for the existing versions, due there being more out there. I'll be waiting for the adapter for the new version. Great initiative nevertheless. Love your products!!
Definitely, that’s a great question! We hope to get you all everything you need to have the best riding experience. Your feedback has been heard!
Any update on this? Got two Neotec 3's that are just waiting for the adapter...@@CardoSystemsGlobal
@@CardoSystemsGlobalWill you be making an adaptor for the Neotec 3 that can accommodate the Packtalk Bold?.
I am not sure if Cardo has released these yet but if not, I wanted to also point you towards the 3D printing community. I am certain this component has been designed and is purchasable from a 3rd party 3D print service, if they still don’t have it. Just a quick search away! :) cheers.
@bluebeast1583 hey, thanks for the tip. Anyway, I went with the HJC RPHA 91, and ended up glueing it to the part that you would remove to install their comms system, essentially the same if I had gone for the NEOTEC 3 (and had I not find a 3d printed adapter). I glue it on there with their 3M tape and left it there with two clamps for around 24 hours. I've tried pushing it in all directions and pulling with some force and it appears that the cover won't get off easy.
Also of interest, I managed to pass all wires through the paths normally there for the original comms, with the 3.5mm plug inside the "hole" normally for the battery on the back of the helmet, avowing this way adding a possible pressure point somewhere on your head. This is something I haven’t saw being done on any of the videos I reviewed for the RPHA91 + Cardo Edge.
I will however look for a 3d print model for the RPHA91 + Cardo Edge, as it might provide an ever more secure mounting, and, possibly, making it not protrude a little less from the helmet.
I need this back in stock on the cardo website, or sold anywhere in australia too, it's the one thing keeping me from pulling the trigger on a cardo system for my gt air 2 right now :)
Neotec3 adapter needed!!
Any plans to make an adapter for new Shoei GT Air 3?
Wow, that's awsome! I think you guys need to make also for HJC RPHA 71 too.
Very cool, have you guys thought about making a similar adapter for the Schuberth C5 and E2? I would be very interested. Thanks!
Nice!
I’ve made myself an adapter for the Packtalk Bold by using a small aluminum plate that I’ve shaped and used double sticky tape. Basically it does the same job, the intercom is there for about one year and it stays strong. I would buy one of those though if it would be compatible to Packtalk Bold.
When do we get an adaptor for Neotec 3?
also looking for a solution to mount an cardo 2x in neotec 3 and a good gopro mount
cool, i need it
Does the neotec 3 have the same mounting design as the Neotec2?
Like many others, I'm curious why there is an adhesive to keep the adaptor in place instead of designing it with tab connectors to lock it in place?
Do u bring it for the bold ?????
is this adapter compatible with Shoei Neotec 3?
Hi, it si compatible with the cardo packtalk bold syatem?
Is this coming to the GT Air 3?
That was the only thing holding me back on purchasing the neotec 2, now I’m good to go
Love to hear that! Happy to help!
Will this work with Packtalk bold on a Shoei Neotec 3?
Will that work with the Pack Talk Bold?
will it work with a Cardo Freecom?
is it compatible with freecom cardos?
Can we get a proper adapter that does not require sticking the plate to the helmet?
WTH!!! How am I just seeing this now. Now I'm waiting for the Neotec III version as I wait for my Neotec II to spoil. hahaha
Mine fell of after one ride.
I've used cardo since the first pac talk.
But this thing is just not fit for purpose I've now stuck it on with sugru pore effort 😔
@Cardo: I‘m using a SHOEI Neotec 2 and the Freecom 4X System. Can you please offer a holder for this too. Nobody from my friends or I are planning to a newer version (just 1,5 years old) just for that function. Any idea if this will be released and when?
Good idea I’ll send it to the relevant rep!
@@CardoSystemsGlobal That would be great. I have the same problem, and own two Cardo Freecom 4+ 's. Not planning to upgrade them either, but it would be nice to have a proper and clean solution to mount one on my brand new Shoei J-Cruise 2.
@cardo any news about the release ?
How about the Packtalk bold? Any adaptors for that?
Nothing new at the moment 🙏
@@CardoSystemsGlobal another request here for packtalk bold adapter!
@@CardoSystemsGlobal +1 for packtalk bold adapter please. Maybe also for freecom 4+.
no diff ! haha still one bulk sticking out.
That's a pretty average fit. There are 3D printed versions that fit properly and no adhesive needed....
Wow that looks sad and cheep :(
THAT is a BS, jinky-a$$ solution. Packtalk owners - you can get the same effect by just using the clip mount that comes with the Packtalk Edge. No need to buy something else when the original clip works just fine after you remove the COMMs cover. Now if CARDO actually put some effort into something that slips more nicely into that COMMs area, this conversation would be different.