SHOEI RF 1400 HELMET HOW TO INSTALL CARDO EDGE IN | STEP BY STEP
HTML-код
- Опубликовано: 16 ноя 2024
- This is the Cardo Packtalk Bold being installed on my SHOEI RF 1400
Unleash the Power of Seamless Communication: Cardo Packtalk Edges Step By Step Installation Guide!
One of my favorite features about this helmet is the Air Mount. It makes it easy to switch your Cardo to other helmets. If you have more than one helmet the PACKTALK EDGE 2ND HELMET KIT is a must-have!
'Air Mount' system to connect to your helmet, increased range, higher quality sound, and lots more.
👉INSTAGRAM: / srtf1k
I don't normally take the time to thank someone for a video, but .. thank you. I really appreciate how you got right to the helmet padding deconstruction and install, very straightforward. Not only that but some of your cable routing ideas were extremely helpful.
@@ooliquidnightoo highly appreciated. I am glad I did able to be give small tips and guide about tricky points of installation.
What do you do with the ear covers you took out? Do you put them back or just leave them off?
Just took them out and store it in the box. Perhaps one day if i remove speakers. I may insert back
This is a great video. Thank you so much. I am really new to installing headset into Shoei and you have really helped me.
Thanks for feedback, I am glad that it did make it easy for you.
Thank you, dear! Incredible video, going to install mine soon!
good luck. thanks for feedback
What tape did you use to hide the wires that didn’t come off easy? Thank you for the video by the way!
@@TheSter48 you are welcome. I used just normal tape. Nothing special. Any type it helps.
I have the same helmet in matte black. I installed my cardo edge with the adhesive but it came off after using it once. I live in Australia and it was 26 degrees not sure if its because its hot. Is yours still on? Is it easily come off like that? Do you have any suggestion that I can do to keep it on properly? Also Thanks for your video, it made the installation a lot easier.
@@Cihan_Vural first of all sorry to hear that, but you got the issue. I live in Saudi Arabia and trust me here is more warm than Australia.. I had no issue at all with the coming off or stability. Perhaps you buy 3M strong stickers to stick it back and make sure the surface exactly flat doesn’t have curve to avoid sticking.
@@Cihan_Vural 🫡❤️🇹🇷 Turkmusun?
@@Cihan_Vural probably matt black surface doesn’t allow to have strong sticker. Matt has different surface than grey colour one.
@@srtf1k my helmet is shoei nxr2, as i know its the same helmet. So yeah It has some curves on the side, i wiped it with wipes that comes with it, dried it up. But i start using it in 2-3 hours instead of leaving it all night but i dont think thats the problem. Man i would be so sad if its because its matte black. With this specific helmet, we cannot use the clamp too :/
@@srtf1k haha evet kardesim ❤️🇹🇷
Thank you for the detailed video!
You are welcome. Glad it helps people❤️🙏
I feel like the Cardo Edge speakers are a bit to bulky for that helmet and they hurt my ears a bit. Do you have the same feeling?
On loudly level it is. But when you do over 150km/h it is not enough. Wind takes over everything 😅
Some friends even goes bu 44mm speakers
I think it comes with 2 different pads? One thick and one thin. If u used the thick, try changing to the thinner ones.
@@CarlJohnson-ok2mr no it works and suits well
Thank you.. it's very helpful 👍👍👍
Is the RF-1400 the same as the NXR 2?
Basically yes. The only difference is the material of the shell. But everything else is the sams. RF-1400 is the name in the US, whereas in Europe it‘s named NXR2
I am not sure but if it is in Europe. It might be. What they call it
Yes, I'm in the UK and have a white NXR 2. In the US it's definitely the RF1400.
I would pay for an install
Would do it pleasure. No charge bring it on🫡🙌🏻
great video. I would suggest you to get a proper chin mount
Thank you for your nice words😇.
Tbh this chin mouth what I found as latest out there in the market and so far it works pretty strong on high speed even. But! I have used a stronger 3M sticker😉
Please suggest me if there are better ones🙏
@@srtf1k you should be able to find 3d printable schematics for this helmet (look for rf1400 or nxr2) and then have one printed and stick it to the helmet, or you could get one from chinmounts but they're very overpriced and you would have to replace the sticker with sugru because I've heard it tends to fail
thank you @@yungfabio420
@@srtf1k no worries, glad I could help
Thank you!!!
Speakers dont touch your ears?
@@damacknificent151 no. It is not touching