Mercedes OM651 engine (w204 CDI) lack of power. Limp mode.
HTML-код
- Опубликовано: 15 авг 2021
- This engine has error codes P245414 and P245328 stored in memory. Despite the engine light is off, engine won't go past 2500 rpms and 7g tronic has jerks and gears will engage at higher rpms than normal. This is probably due to the B28/8 differential pressure sensor of the dpf. I'll keep posted the video description :-)
- Хобби
Vacuum line going to the turbo popped off for me!
Why?
I had the same problem and I solved it, it was the particle filter sensor, I changed it and solved the problem
Yep, had the same problem. Limp mode can be a variation of reasons, but mine was fixed when i changed the oil in the trans. + changed exhaust gas temperature sensors before and after the DPF filter.
The dpf differential pressure sensor is just one sensor part with two hoses😊
if you have removed adblue, the problem lies in the programming, you need the original file and do it somewhere else, I had this problem and I fixed it
What error was there?
Hello everyone, my car has the same sound. but it has not lost power, what could be the reason?
It will lose power soon mine started like that too
My car suffers from the same problem. It was diagnosed that the exhaust gas return pipe is broken and there is a pressure leak, so the repair will take 10 days until the broken piece arrives. I will let you know everything new.
How did it go? I have the same problem
@@zaydelias3339 It's still the same problem, even Mercedes doesn't know the reason for this, unfortunately
@@MOALR-fn9ughave you changed the egr valve? Dpf pressure sensor?
I replaced the sensor but egr no
I am dealing with the same problem now guys , my car is at the merc specialist, they’ve said will check the vacuum lines , to see if there is any leaks, in not they said could be oil into the vacuum lines, and I’ll need to find out where is leaking from ! That could cost 1500 pounds they said ! Duno what to do ….😢
It’s on my car same this one is have a problem what can I do the back and the power please tell me
It's impossible to diagnose like this. But it could be the dpf pressure sensor. Good luck
Lo as reparado?
i have the same problem mine show up after chip tuning i dont have any ideas how to fix
hi, these are not easy diagnosis. Anyway in this case was the dpf differential pressure sensor. Good luck
@@ticktime6569 cheers mate
Dpf block for me
Egr vacuum get stuck
Just read the fault codes instead of guessing.
I have the same problem today i changed the sensor and same.. the sensor before was changed 2021 by someone. Diag is writing that sensor is still bad…
Probably not the sensor. Could be clogged dpf, wire issues. Not easy to tell. Good luck
Replaced wires already bought the 3rd sensor original mercedes, replaced the temperature sensor on dpf, cleaned the dpf by proffesionalls and still the same issue i am done .
@@MultiResN sorry mate 😔
@@MultiResNdid you manage to get it sorted ?
Dpf intasato potrebbe essere
Dpf sensor
I did a regenration to the dpf and two month good and now the same probleem in my mercedes c class
Wht could be ? I didnt chabge the sensor
Please tell me how did you solve it, i have the same problem
Hi, I didn't solve it yet, but I think that 90% it's the B28/8 dpf pressure differential sensor
DPF for cleaning . I had this same issue
@@sylwestermielczarek5944 before cleaning the dpf be sure that it is the problem. It could be the differential pressure sensor faulty
@@ticktime6569 I cleaned my DPF. Nie it is better
@@ticktime6569 did you solve it?
Please is this fuel filter issue
No, dpf differential pressure sensor
Isn't dpf diesel particulate filter?