Samsung Waterwall Dishwasher Beeping 3 Times

Поделиться
HTML-код
  • Опубликовано: 26 дек 2019
  • My Samsung Waterwall Dishwasher is beeping. When you start it up the dishwasher beeps and flashes for five minutes. Only the top rack gets clean, the bottom rack gets mostly clean. No idea what the problem is with it but I'd like it fixed or repaired. The specific model of this dishwasher is Samsung DW80J9945US Stainless Top Control 24" Tall Tub Built-In Waterwall Dishwasher DW80J9945US/AA. Bought it from Best Buy in 2016 and had them install it.
  • НаукаНаука

Комментарии • 64

  • @koryyyy
    @koryyyy 2 года назад +11

    Ok, old video but I got here because my Samsung did the same. Top of the line, 30 days old, the one with linear washing. 3 beeps and wont wash.
    That because after trying to drain still water inside it. Could be clog in the drain hose, OR, in my case, the wife removed the filter to clean it (or thats what she thought) and installed it back improper (loose). I'm not sure if food got into the pump or the dishwasher does not drain properl;y without the filter installed.
    I installed it correctly, I filled inside the dishwasher with water (by hand) and "cancel" the wash, so will show 1 minute and will drain. It drained the water and then started a new program and worked.
    leaving this here in case that helps anybody

  • @ChapTone
    @ChapTone 2 года назад +3

    Same issue, seems as if it was an obstruction issues. Pot handle was hitting back wall and wasn’t closing the unit properly. Removed pot and rearranged my sons mess and machine is working fine now. Check for obstruction with the three beep error signal.

  • @jmagallanes24
    @jmagallanes24 11 месяцев назад +2

    This video save me $$$. Just like everyone else. Damn spoon was poking out not allowing the machine to work. Thanks!

    • @duytran4580
      @duytran4580 4 месяца назад

      Exactly the problem I encountered today!

  • @johnnyverzace2362
    @johnnyverzace2362 9 месяцев назад +1

    Removing a utensil on the upper rack that was blocking the rotor beneath it fixed this for me

  • @jeffhiatt4239
    @jeffhiatt4239 11 месяцев назад

    I had a red piece from the bottom slider obstructing the water wall. Took it off of the front of the basket and it works now

  • @vitalimakarov
    @vitalimakarov 3 года назад +2

    nice.Thanks for helping

  • @janethalvarez2093
    @janethalvarez2093 Год назад +2

    Sure enough A dish slipped out of the lower basket
    Issue fixed. Thanks!!

  • @elbobbo341
    @elbobbo341 Месяц назад

    If nothing is poking out then just let it beep for roughly 10 minutes and it will start washing. Worked for me anyway

  • @katp9563
    @katp9563 11 месяцев назад +1

    Mine does this, sorta...keeps trying to run then flashes/beeps. No explanation/no obstruction. However after 10mins it does start and run a cycle based on my specifications..... 🤷🏻‍♀️ Maybe this will help someone

  • @blossomteaches7125
    @blossomteaches7125 Год назад +2

    1:25 the tragedy happens.

  • @derekjohnwoods
    @derekjohnwoods 5 месяцев назад

    I have exactly the same dishwasher and exactly the same problem. Eventually it starts but the bottom rack is badly cleaned.

  • @shutchomatic
    @shutchomatic 10 месяцев назад +1

    Turns out it was a pair of chopsticks that were put in with the forks and spoons. It was blocking the lower washbar. Working great now.

  • @leorentzis63
    @leorentzis63 4 года назад +15

    Same here. Samsung products are junk. My new microwave broke AND I had to change the ice maker in my fridge also. Complete garbage

    • @mazenelsiss4023
      @mazenelsiss4023 4 года назад

      @@oatmealdog how do you fix the issue

    • @oatmealdog
      @oatmealdog  4 года назад

      @@mazenelsiss4023 don't know.

    • @Mrtekem
      @Mrtekem 4 года назад +1

      I wouldn't say garbage. All of the brands with similiar tech have the same issues. They resolved the issues in future models so guess we should have waited until they worked out all of the bugs. My four door flex fridge still looks fancy even after 6 years. ;)

    • @mellypm6626
      @mellypm6626 3 года назад +3

      Same! I wish I never bought all 4 appliances from Samsung! My ice maker is broke & it’s only 3 yrs old

  • @skoko2205
    @skoko2205 7 месяцев назад +2

    Mine did the same. Beeped 3 times, checked everything. Reset the system, still the same issue. Just left it like that, it beeped 3 times for around 5-6 times and started functioning normally after that.
    Hope this helps someone.

  • @robertachtmeyer2781
    @robertachtmeyer2781 Год назад

    Did you get this issue fixed? Mine is doing something similar

    • @oatmealdog
      @oatmealdog  6 месяцев назад

      No, after contacting Samsung they said they would have to replace the arm and the cost wasn't worth it. I bought a new dishwasher.

  • @zachrose5129
    @zachrose5129 2 года назад +4

    Thank you a ton my dishwasher doing same thing I was about to burn this mf lol but I had straws in the lower basket that were going through the bottom when I removed them it started working fine smh 😅

  • @rajwinderdhaliwal7616
    @rajwinderdhaliwal7616 3 года назад +9

    Same thing happened to me. So this happenes when the rotor arms are stuck so if you have long spoons or spatulas remove it and then run.

    • @roj00roj00
      @roj00roj00 3 года назад

      Thank you !!!! This happened to me and checked if anything was in the way and you were right ! Saved me from doing dishes lol

    • @brianhobson3468
      @brianhobson3468 Год назад

      Thankyou I had a pot handle down below the bottom rack. Your comment saved the day

    • @aydinredsten2577
      @aydinredsten2577 8 месяцев назад

      There’s nothing in the way and I’m having this issue

    • @thegrizzable
      @thegrizzable 4 месяца назад

      ​@@aydinredsten2577 I'm having the same issue. Did you figure out what it was?

  • @mazenelsiss4023
    @mazenelsiss4023 4 года назад +1

    I have the same issue How do you Fix it

    • @Mrtekem
      @Mrtekem 3 года назад +1

      I had a best buy warranty on mine and they shipped out an updated drive assembly as there was a revision made due to all of the issues with the original design. Ill update when mine is done on Monday

  • @shantelleganon7314
    @shantelleganon7314 Год назад +1

    My god I just drove myself insane for half an hour… it was a damn chopstick coming out of the compartment where you place utensils!

  • @hvdpro
    @hvdpro 10 месяцев назад

    I had the same problem, 3 beeps at the start of the cycle. It turned out it was the filter. You need to take it out and wash it. I hope it helps

    • @aydinredsten2577
      @aydinredsten2577 8 месяцев назад

      That’s not an issue for my model and it’s doing the same thing.

  • @MandaDebbie
    @MandaDebbie 7 месяцев назад +1

    Here to say : yes, something was blocking the bottom rotor! I had the same issue and was STRESSED because the last thing we need is a broken dishwasher. Funny enough, this issue is NOT stated in the owners manual 😒 FU Samsung. Anyways, just make sure there’s nothing blocking the waterfall at the bottom.

  • @truebighairlady
    @truebighairlady 4 года назад +5

    Mine is doing the same thing! So disappointed in Samsung. I ran a test on it and no errors. I have no idea what’s wrong with it!!

    • @kristyblevins951
      @kristyblevins951 Год назад

      There is NOTHING in my dishwasher I'm trying to do a clean and it's doing this

    • @thegrizzable
      @thegrizzable 4 месяца назад

      ​@@kristyblevins951did you figure out what it was? Mine is doing the same thing

  • @mia.samokevich
    @mia.samokevich 3 года назад +3

    Samsung dishwashers have a waterwall motor that consistently fails, mine reads a 7e code. second time replacing mine. just a friendly tip,take a flashlight and open the door and make sure nothing is obstructing the waterwall arm as it moves back and forth and some dishes will hit the top spray arm. look for obstructions.

    • @wstt4
      @wstt4 Год назад

      How do you get the error code? I have a DW80J7550US and can’t find on the net where to get the error code. I found it once. I think my waterfall isn’t working.

  • @thespaz3656
    @thespaz3656 2 года назад

    Beep beep beep

  • @jessilentz7505
    @jessilentz7505 4 года назад +1

    Mine is doing this too, anyone know how to fix it?

    • @mattbasham3423
      @mattbasham3423 4 года назад

      Motor assembly for the waterwall is failed and the deflector is not moving as a result. There is a video on RUclips on how to repair if you don't feel like paying over 100 for a cheap Chinese motor to replace it.

    • @isanaumanandhini9254
      @isanaumanandhini9254 4 года назад

      @@mattbasham3423 pls could you send the link to repair it ? 1st my dishwasher do 7e error code, i clean the filter n restart the cycle. But always same error code coming ... 7e. Next am do reset n am re start 1 short program (38 min). Then just after 1min of starting the prog, it start beeping. 5 times him do 3 beeps n program of washing stopped.

  • @skygiuli
    @skygiuli 3 года назад +5

    Make sure nothing is hanging out of the lower basket getting in the way of the waterwall arm. Mine was doing this same thing but after removing the lower basket it worked.

    • @mellypm6626
      @mellypm6626 3 года назад +2

      Thank you!! You were right I had a spoon hanging down. Now it’s running👩🏻‍🔧

    • @fossdom5568
      @fossdom5568 3 года назад +3

      it worked

    • @shyambpatil19
      @shyambpatil19 2 года назад

      I had a spoon hanging down also. It worked after I removed it. Thanks

    • @fanydesousa-sap6162
      @fanydesousa-sap6162 2 года назад

      This solved the problem for us. We emptied the dishwasher and there was something obstructing one of the arms. We reloaded properly and worked again

  • @ebardales1
    @ebardales1 2 года назад

    I am having the same problem! Will never buy a Samsung product again.

  • @wk7544
    @wk7544 4 года назад

    Ever figure this out? Mine is doing the same thing.

    • @oatmealdog
      @oatmealdog  4 года назад +1

      No. I ended up replacing this with a Bosch. It's a much better dishwasher.

    • @bstaz4914
      @bstaz4914 4 года назад +5

      It is the water wall looking to find its home starting position. There is a magnet under the bar. Push the water wall bar all the way back and try it again. It may take a few times.

    • @jfisch99
      @jfisch99 4 года назад

      Sweet potatoes Oh yeah This worked for me. Will see how long it lasts....looking for new dishwasher replacement now.

    • @Mrtekem
      @Mrtekem 4 года назад +2

      @@bstaz4914 i just did this and it seemed to help, then 7E popped up. I have the five year warranty on my dishwasher from BestBuy but ironically, when i first bought this, Samsung had to repair it as this code came up when we first installed it. Nothing blocked the tray or waterwall. We used it everyday since 2016 so...not too bad for a heavy use machine

    • @bstaz4914
      @bstaz4914 4 года назад

      Update...called a appliance repair company. They called Samsung in front of me and Samsung person said that The chimes and flashing lights are the Samsung code to replace the entire drive assembly. Motor, rail and nozzles and not the waterwall bar. Cost me 500 bucks. Was going to just throw it away because who spends 500 dollars to repair a 750 dollar 4 year old dishwasher... Had to repair it because you cant find a dishwasher in NJ due to covid and wasn’t going to wait until October to maybe have one.

  • @eagle94haslanded
    @eagle94haslanded 3 года назад +5

    These things are JUNK. Disappointed in my samsung washer, fridge, and dishwasher. The microwave and dryer are ok.

  • @TheDanpirro
    @TheDanpirro Год назад +1

    BAHAHAHA I had a pan handle sticking out the bottom

    • @TheDanpirro
      @TheDanpirro Год назад +1

      And then I left the video playing and im staring at my dishwasher "hearing it beep" and going crazy again!!!

    • @katp9563
      @katp9563 11 месяцев назад

      ​@@TheDanpirroMine is doing the same thing except it keeps trying to run then beeps like this...however after 10 mins the cycle starts no problem...no obstruction..happens every single time...not sure what the issue is but as long as it runs!!!