For everyone having trouble with "path not found" or "c:/boot not avaible", I finally solved it with the following commands at the command prompt: bcdboot c:\windows /s c: bootrec /rebuidbcd a (for all) exit Then resume the starting process. Done, you are welcome!
Thank you so much! I followed every step by many videos, but I stuck in the "path not found", which was the last step for several days. After correcting the commands according to your message, my laptop has finally worked properly! Your tutorial is useful.Thanks a lot!
The problem with the use of a failing hard drive is that all new PCs are shipping with SSDs do they still get bad sectors and other warning signs of drive failures like their mechanical counterparts?
THANK YOU SO MUCH. Countless videos, websites etc. were not clear and not helpful at all. I found your video, followed every step and I have it finally fixed. PC booting up like a charm again. You are amazing.
I don't know how but seems like my C: has now become F: it's F: in the cmd is showing all the files that are supposed to be in the C: drive, then once I press enter after the bootrec /rebuiltbcd it says total identified windows 1 add installation to boot list? Yes (Y)/ No (N)/All(A) I choose Y then it says The system cannot find the path specified, please help me fix this!!
Great video but in my case I came across this error Error 0xc0000098 while trying to install windows 10 on a brand new Hard disk. The disk is EFI Based System & HDD. How can i manage to get pass over this if i do not have anything installed yet? I do have a windows 10 bootable usb stick & also tried with the media creation tool usb to get access to command prompt. I really do not understand why i am having this issue, please any tip would be very welcoming. Thanks
Hi tried the steps closely. got stuck at bcdedit /export c:\bcdbackup. I received " the store export operation has failed. The system has attempted to load or restore a file into he registry, but the specified file is not in a registry file format". What should I do to fix this?
Hi, I followed every step but after using bootrec /rebuildbcd it said "Identified Windows Installations: 1 C:\Windows Add instalation to boot list? Yes(Y) /No(N) /All(A). Inputting Y o N it says" The system cannot find the path specified". Any ideas on what I can do next? Thanks in advance.
It was fixed for me! I used a 'windows 10 boot usb drive', you can probably find it at a local electronics store. Make a call to see if they have it and go save your laptop.
Wow huge thank you brother. Just finished my second pc build and got this error after I set up all my drivers and ran benchmarks. Fixed it no problem great information!
TYVM. This video brought my Win11 PC back from the BSOD startuo. I caused this to occur after entering my BIOS from within Windows 11 settings because I was having a problem entering the BIOD from the keyboard DEL key during bootup. Aftering entering the BIOS setup and confirming some settings and exiting without changes I then to my horror was greeted with the BSOD your video covers. I was not having any issues... weird stuff. Checked SSD for errors and none were found. Awesome video.
My laptop's had the exact same issue, how did you resolve the issue? I followed the cmd instructions and it came up with a different answer to the last promt shown in the video, mine said something along the lines of "total identified number of windows installations: 1. Add installations to boot list? Yes (Y)/No (N)/ All (A)"
I have dual boot windows and linux, the problem appeared 6 months after installation, and the repair screen never appears no matters how many times I restart
Sir help 😭 me !! I Found this error "The store export oparation has failed. Data error (cyclic redundancy check)." .... After typing this cmd. ...... "bcdedit /export c:\bcdbackup" Please help 🥺🥺😭😭
And when you are on this video If you find you have multiple primary partitions Try the one with the biggest size under the heading "size" Worked for me
What happens if you get to the last bootrec /rebuildbcd and it comes up with: Total identified Windows Installations: 1? [1] C:\Windows What do you do with that? Need help please?
To troubleshoot and resolve the BCD error code 0xc0000098 preventing Windows 11 from booting, follow these steps: 1. Create a Windows 11 Bootable USB Drive or DVD Installation Media. 2. Run a disk check to fix any disk errors on the C partition. 3. Rebuild the BCD using a USB drive or third-party software like EaseUS Partition Master Professional. 4. Repair the Master Boot Record (MBR), Boot Sector, and Boot Configuration Data (BCD). 5. Run Startup Repair. 6. Run the System File Checker (SFC) Utility. 7. Run a CHKDSK Scan. By following these steps, you should be able to troubleshoot and resolve the BCD error code 0xc0000098 preventing Windows 11 from booting.
Hey, in the part where he said we restarted the computer at minute 3:17 what did he do, what button did he press or what!! (I only saw that he moved his arrow)
Good one Brian this shows a few options that I wasn't aware of. Now would using an image from an external drive do the same thing and is this possible in a blue screen situattion?
So my problem is unique. I just built my pc. First boot i was in bios to use a usb and install windows. Couldnt find the usb so hit save and exit. Now it wont boot at all. My tv says "no input". Did i ruin my motherboard before i got to even use it?
I didn’t know that I could fix windows that way. Does the command line work only for windows 10 or will the command’s also work on windows server 2008, 2012, 2016 hyper V?
Bootrec will work with Windows Server, but I would not start running commands willy-nilly on Windows Server, remember its a server not a desktop computer.
DUDE I LOVE YOU IF I COULD I WOULD KISS YOU! (NO HOMO BRO) but bro for real i was an emotional wreck this entire morning because i thought i had lost my important family stuff/pics/etc but dude u literally are amazing. Typically I have a really hard time getting the correct solution(s) through RUclips but dude - i just want to say thanks man. Seriously appreciate this video. +Subbed & liked Ps: Im not get i swear im just giddy happy 😜
mine problem showed system\ pcw.sys error. but i just did nothing and i forced restart pc and it ran normally but my games are lagging so much like after 5 to 7 minutes of play..😢😢😢 something is wrong... will factory resetting pc fix?
Hi thanks for the video every command was working fine until I reached bcdedit /export ....command and that was not successful...so I failed to recover my device. Would you be able to reply what else may work? Thanks.
HiBrian, hello everyone... This video seems super helpful and is very friendly to reproduce... thanks to you Brian. Quick question : do you think fix mbr is of need since win11 seems only capable to run on gpt ? Am I missing something here ? just to understand why the fixmbr command. Thanks a lot :)
The problem originate when i cloned the sytem volume c to ssd and 2 systems volumes are connected in laptop. Now i cleaned the ssd but still couldn't able to log in. System restore and system reset both not working for me. Sfc scan found some corrupt files. Dism returning error code 87. Kindly help how to fix and re log in
Hey Brian, i followed all your steps correctly, up until "reboot your pc" please explain to me how i go on from there, like do i just press the power button or idk, please help
Trouble with "path not found" The following commands at the command prompt: bcdboot c:\windows /s c: bootrec /rebuildbcd A (for all) exit Then resume the starting process (^ i read the comments this works for me)
When I typed the command bootrec /rebuildbcd It found 2 Windows identified installations and it asked me "Add these installations to boot list?" I could select either Yes, No, or All and whatever happens it says "Specified Access path is unfound" What does it mean ? What do I do ?
This happen to me after buyung brand new laptop after 6-7 days And now I can’t able to power it off or reboot after opening this command pallete screen😢😢 Help plz
Trouble with "path not found" The following commands at the command prompt: bcdboot c:\windows /s c: bootrec /rebuildbcd A (for all) exit Then resume the starting process
Is this a custom build or like and HP or Dell? Dell and HP have built-in diagnostics, Dell is F12 and HP is F2. When the PC boots, keep taping the key until you get the option to run diagnostic, HP choose system tests then run a full scan, and for Dell it'll run a basic scan and will eventually ask if you want to run a full or advanced scan.
Trouble with "path not found" The following commands at the command prompt: bcdboot c:\windows /s c: bootrec /rebuildbcd A (for all) exit Then resume the starting process
After typing bootrec/rebuildbcd it shows tat there's a installation and asks me to add tat installation to boot list...when i type yes or no it shows that the system cannot find a specified path...y ?? 🥲
Trouble with "path not found" The following commands at the command prompt: bcdboot c:\windows /s c: bootrec /rebuildbcd A (for all) exit Then resume the starting process
First tip didnt help... can't open this settings menu anymore, when i shutdown and startup my pc 3 times it doesn't change shit, still got the blue screen with the errorcode..
Hope this video helps you fix BCD Error Code 0xc0000098. Drop us a LIKE 👍
Thanks for your help.
Bootsect /nt60 sys
No se encontró la partición del sistema:
No se puede encontrar el dispositivo de sistema solicitado.
@@franksinatra474 كل ما نزل نسخه هنعمل كدا
I cannot see the reset this pc
Not yet, getting this error soon after just plugging the USB
For everyone having trouble with "path not found" or "c:/boot not avaible", I finally solved it with the following commands at the command prompt:
bcdboot c:\windows /s c:
bootrec /rebuidbcd
a (for all)
exit
Then resume the starting process.
Done, you are welcome!
Thank you very much, I was stuck there. How did you found the solution to that step? Where did you find it? thank you again
This is helpful. Actually i change my "c" to "d" because c has no folder. Thank you so much.
Thank you so much!
I followed every step by many videos, but I stuck in the "path not found", which was the last step for several days. After correcting the commands according to your message, my laptop has finally worked properly!
Your tutorial is useful.Thanks a lot!
@@hakuiii8261how you fix that bro mines says path not found
You are the saviour bro 😘😘😘. Stuck there .. solved 😂 ❤ 😘😘
I got this problem 4 days after purchasing a completely new laptop from Lenovo.
Straight forward no fluff ,no nonsense,all facts and info thank youuu
How to fix Windows 11: don't install Windows 11
Did you work that one out all on your own? lol
Every windows got bsod problems bruh..
Man I just started installing a windows update last night. I wake up . This is the problem I see.
Never a-fucking-gain.
I just had this problem with my nitro 5 and I’m suppose to be doing a session soon 😔
i windows 11 is the default OS on my Laptop. it was there ever since i bought it
The problem with the use of a failing hard drive is that all new PCs are shipping with SSDs do they still get bad sectors and other warning signs of drive failures like their mechanical counterparts?
SSD do fail and cause intermittent problems as well.
@@Britec09 I knew they failed I just wasn't sure if they displayed the same warning signs knock on wood haven't had one fail
THANK YOU SO MUCH. Countless videos, websites etc. were not clear and not helpful at all. I found your video, followed every step and I have it finally fixed. PC booting up like a charm again. You are amazing.
I don't know how but seems like my C: has now become F: it's F: in the cmd is showing all the files that are supposed to be in the C: drive, then once I press enter after the bootrec /rebuiltbcd it says total identified windows 1 add installation to boot list? Yes (Y)/ No (N)/All(A) I choose Y then it says The system cannot find the path specified, please help me fix this!!
pls pls tell me what you did to fix this!!! I'm having that problem right now
Me toooo@@fernguIIy
Did you fix this?
@@dabio7270 I did but I literally don't remember how I did it
@@gamelysis2777 u pressed yes no or all which one should I do
Great video but in my case I came across this error Error 0xc0000098 while trying to install windows 10 on a brand new Hard disk. The disk is EFI Based System & HDD. How can i manage to get pass over this if i do not have anything installed yet? I do have a windows 10 bootable usb stick & also tried with the media creation tool usb to get access to command prompt. I really do not understand why i am having this issue, please any tip would be very welcoming. Thanks
Hi tried the steps closely. got stuck at bcdedit /export c:\bcdbackup. I received " the store export operation has failed. The system has attempted to load or restore a file into he registry, but the specified file is not in a registry file format". What should I do to fix this?
i have same problem
any updates on this?
Hi, I followed every step but after using bootrec /rebuildbcd it said "Identified Windows Installations: 1 C:\Windows Add instalation to boot list? Yes(Y) /No(N) /All(A). Inputting Y o N it says" The system cannot find the path specified". Any ideas on what I can do next?
Thanks in advance.
@Britec09 I have the same issue
Any luck with this step?
What can we do with this issue?
It was fixed for me!
I used a 'windows 10 boot usb drive', you can probably find it at a local electronics store. Make a call to see if they have it and go save your laptop.
at the beginning, did you change the directory to C: in the cmd prompt by typing "c:" then enter?
Thankyou so much, bro!🥺
I really have a hard time to fix my pc, i watched many videos on yt but no one can help me. Thank God i found this video!❤️
I never knew that BCD existed in Windows
Brian, Thanks Much for the steps below in notes,
All the best,
Bob
You're welcome
Wow huge thank you brother. Just finished my second pc build and got this error after I set up all my drivers and ran benchmarks. Fixed it no problem great information!
TYVM. This video brought my Win11 PC back from the BSOD startuo. I caused this to occur after entering my BIOS from within Windows 11 settings because I was having a problem entering the BIOD from the keyboard DEL key during bootup. Aftering entering the BIOS setup and confirming some settings and exiting without changes I then to my horror was greeted with the BSOD your video covers. I was not having any issues... weird stuff. Checked SSD for errors and none were found. Awesome video.
My laptop's had the exact same issue, how did you resolve the issue? I followed the cmd instructions and it came up with a different answer to the last promt shown in the video, mine said something along the lines of "total identified number of windows installations: 1. Add installations to boot list? Yes (Y)/No (N)/ All (A)"
I don't get the second screen with all the other advanced options, only the 'blue screen of death', what would this mean?
me too let me know if you figure anything out
yea me too and if damn annoying that the only thing I've been looking for like 8 hours
I have dual boot windows and linux, the problem appeared 6 months after installation, and the repair screen never appears no matters how many times I restart
After 12 hours of searching si almost lost hope as I had alot of data and work that could’ve been lost, it finally worked thank you so much.
Sir help 😭 me !!
I Found this error
"The store export oparation has failed.
Data error (cyclic redundancy check)."
.... After typing this cmd. ......
"bcdedit /export c:\bcdbackup"
Please help 🥺🥺😭😭
At 3:11 min when i run the command rebuildbcd , i got 1 in the window installation. How to fix that one ?
Same here. Did you solve it?
@@heliobraz4184did u get solve ? Yes no all what should I do
Hello on 3:08 I have Total identified windows installations:1
[1] C:\Windows
Add installation to boot list? Yes/No/All ??
Same issue is with me... I have 3 installations
And when you are on this video
If you find you have multiple primary partitions
Try the one with the biggest size under the heading "size"
Worked for me
What happens if you get to the last bootrec /rebuildbcd and it comes up with: Total identified Windows Installations: 1?
[1] C:\Windows
What do you do with that?
Need help please?
same issue with mine, how did you solve yours?
Solved it?@@Guts364__
To troubleshoot and resolve the BCD error code 0xc0000098 preventing Windows 11 from booting, follow these steps:
1. Create a Windows 11 Bootable USB Drive or DVD Installation Media.
2. Run a disk check to fix any disk errors on the C partition.
3. Rebuild the BCD using a USB drive or third-party software like EaseUS Partition Master Professional.
4. Repair the Master Boot Record (MBR), Boot Sector, and Boot Configuration Data (BCD).
5. Run Startup Repair.
6. Run the System File Checker (SFC) Utility.
7. Run a CHKDSK Scan.
By following these steps, you should be able to troubleshoot and resolve the BCD error code 0xc0000098 preventing Windows 11 from booting.
Hey, in the part where he said we restarted the computer at minute 3:17 what did he do, what button did he press or what!! (I only saw that he moved his arrow)
Did you find how to restart/reboot from command prompt?
Have you made a post on how to turn on system restore for windows 11?? Again thank you for sharing and have a nice safe day!!
bro i have problems in rebuildbcd step it shows me the system cannot find the path specified
Did you find a solution to this ?
No bro I didn't, I had to finally sell it.
There is a comment with a lot of thumbs up, which resolves this issue
I've got an error in the last step "bootrec /rebuildbcd" .. couldnt add instalation to boot.. " The system cannot find the path specified"
Did you find a workaround?
it shows to me ''Total identified windows instillations : 1 ''I think that's where could be a problem for me ?
Same, did you fix the issue?
same here I think you're meant to type yes with ot
Look at the comment with a lot of thumbs up, this is resolved there
Yes, i did.
@@deinfanhausiwhich one
I had doubts that my windows will never be unlocked but after meeting him I can only say great things about him
Good one Brian this shows a few options that I wasn't aware of. Now would using an image from an external drive do the same thing and is this possible in a blue screen situattion?
and what if we dont have a back up file 2:28 min . what if we just bought the laptop and did 1st install on windows ?
for me it said . couldnt find file at 2:30
So my problem is unique.
I just built my pc. First boot i was in bios to use a usb and install windows.
Couldnt find the usb so hit save and exit.
Now it wont boot at all. My tv says "no input".
Did i ruin my motherboard before i got to even use it?
if you have a graphics card, you should connect your tv with the graphics card instead of the motherboard. should help
I didn’t know that I could fix windows that way.
Does the command line work only for windows 10 or will the command’s also work on windows server 2008, 2012, 2016 hyper V?
Bootrec will work with Windows Server, but I would not start running commands willy-nilly on Windows Server, remember its a server not a desktop computer.
I am still getting access denied for the fixboot operation, is there anything to do
Yeah me too let me know if u find a fix
THIS HONESTLY WORK 100% THANK YOU SO MUCH. Just do every step, close cmd and tap on the shutdown menu and wvalla
How do u go from blue screen to that other screen he went to?
DUDE I LOVE YOU IF I COULD I WOULD KISS YOU! (NO HOMO BRO)
but bro for real i was an emotional wreck this entire morning because i thought i had lost my important family stuff/pics/etc but dude u literally are amazing. Typically I have a really hard time getting the correct solution(s) through RUclips but dude - i just want to say thanks man. Seriously appreciate this video.
+Subbed & liked
Ps: Im not get i swear im just giddy happy 😜
Danke!
Thanks for the donation 🍺
For me it says The system cannot find the path after rebuildbcd.
mine problem showed system\ pcw.sys error. but i just did nothing and i forced restart pc and it ran normally but my games are lagging so much like after 5 to 7 minutes of play..😢😢😢 something is wrong... will factory resetting pc fix?
Thank you your video has been really helpful. ❤
BROOOO I LOVE YOUUUU YOU GOT YOURSELF A FOLLOWER ! 🙏🏽
When I press F1 or Esc it returns to the same screen and nothing changes.
How dk you get to the repair screen?
Hi thanks for the video every command was working fine until I reached bcdedit /export ....command and that was not successful...so I failed to recover my device. Would you be able to reply what else may work?
Thanks.
HiBrian, hello everyone... This video seems super helpful and is very friendly to reproduce... thanks to you Brian.
Quick question : do you think fix mbr is of need since win11 seems only capable to run on gpt ? Am I missing something here ?
just to understand why the fixmbr command. Thanks a lot :)
is reboot pc you said to do reset cause i cant do that or just cut it on and then off
Thank you very much ❤❤❤❤ I thought I was going to lose all my work files
I don't have usb 😢😢
The problem originate when i cloned the sytem volume c to ssd and 2 systems volumes are connected in laptop. Now i cleaned the ssd but still couldn't able to log in. System restore and system reset both not working for me. Sfc scan found some corrupt files. Dism returning error code 87. Kindly help how to fix and re log in
bcdboot c:\windows /s c:
bootrec /rebuidbcd
a (for all)
command fixed the issue
THANK YOU SO MUCH, YOU SAVED MY LIFE
Absolute legend. Thank you so much. 🙏
Hey Brian, i followed all your steps correctly, up until "reboot your pc" please explain to me how i go on from there, like do i just press the power button or idk, please help
After I typed the bootrec /rebuildbcd and typed A (All), it says that "the system cannot find the path specified"
What do I do?
Trouble with "path not found"
The following commands at the command prompt:
bcdboot c:\windows /s c:
bootrec /rebuildbcd
A (for all)
exit
Then resume the starting process
(^ i read the comments this works for me)
@@jumariquijano5794still cant find rhe path bro when i did that
@@jumariquijano5794still nothing, please help. I have a report to submit tomorrow
@@jumariquijano5794thank you very much, this works 🙂👍
Omg that command saved my life and stress
I tried many videos how to fix bcd problem, but 5his one works. thank you so much!
I have tried countless videos like this and not single one has worked for me. My computer is new and in great physical condition.
When I typed the command bootrec /rebuildbcd
It found 2 Windows identified installations and it asked me "Add these installations to boot list?"
I could select either Yes, No, or All and whatever happens it says "Specified Access path is unfound"
What does it mean ? What do I do ?
Same for me I’m clueless
Some wizard once said "oh sh!t, here we go again"
lol
This happen to me after buyung brand new laptop after 6-7 days
And now I can’t able to power it off or reboot after opening this command pallete screen😢😢
Help plz
When I did rebuildbcd it said (1) and gave me options of yes no and all.
What do I do ?
Stuck here too
Just press y or n or a
Trouble with "path not found"
The following commands at the command prompt:
bcdboot c:\windows /s c:
bootrec /rebuildbcd
A (for all)
exit
Then resume the starting process
@@jumariquijano5794thank you!!!! Between the steps in this video and you extra tips here, I fix my computer. You all rock 👊
Thanks very much…your video prevented me from freaking out.
Bro the only thing I can do is go into bios and see the blue screen that’s it
That is not good
Is this a custom build or like and HP or Dell?
Dell and HP have built-in diagnostics, Dell is F12 and HP is F2. When the PC boots, keep taping the key until you get the option to run diagnostic, HP choose system tests then run a full scan, and for Dell it'll run a basic scan and will eventually ask if you want to run a full or advanced scan.
@@Britec09 well the file says it’s a boot problem and I d tried to find a video and could but I think it’s my hard drive and it was also mad in 2014
@@Ninge it’s a custom build
@@kobiehyer_571 you figure a solution? I have a custom build too and it’s bricked like this
Does this still work sir?
Hello everytime I open my laptop it goes directly to the recovery blue screen.
Whay should I do?
it says i have total indentified windows installations : 1 after i use rebuildbcd
what should i do
Just type y or. N or a
If doesn't work
Trouble with "path not found"
The following commands at the command prompt:
bcdboot c:\windows /s c:
bootrec /rebuildbcd
A (for all)
exit
Then resume the starting process
Thank you so much, this worked instantly!
bootrec /rebuildbcd
It says it can’t find the file path
Did you fix it?
@@dustdukk2832 formatted my pc
@@HN_ZO alr no worries I fixed mine too 👍
@@dustdukk2832how
Oigan, en la parte donde dijo reiniciamos la computadora en el minuto 3:17 que hizo, que botón apretó o que!! (Sólo veía que movía su flecha)
Is it normal that for me when I go into the cmd it says "source" instead of "\windows\system32" ?
Fixboot says access denied
Should I remove the extra hard drive when doing the steps?
I’m not able to get to the advanced options screen. The Dell logo doesn’t spin and goes strait to the bsod
thanks brother :) the bootsect command sorted it out for me
After typing bootrec/rebuildbcd it shows tat there's a installation and asks me to add tat installation to boot list...when i type yes or no it shows that the system cannot find a specified path...y ?? 🥲
did you fix it?
What if the windows os is in the D: disk? The steps are the same?
Muito obrigado, não achava solução para esse erro aqui no Brasil ate ver o seu vídeo. Obrigado pela ajuda 12/08/22.
como vc fez pra sair da tela azul?
So sad it doesn't work for me. Windows 10 and it say can't find a specific location to install.
I got this too!
Trouble with "path not found"
The following commands at the command prompt:
bcdboot c:\windows /s c:
bootrec /rebuildbcd
A (for all)
exit
Then resume the starting process
If u do that u lose all photos and song anything? I have laptop with that error
HELP I rebuilt the bcd and it says the system cant find the path specified!!!!
Its not showing continue to windows 11💀
I had that error a few days ago and thanks god I was just able to rebuild the bcd!
From the Recovery window I can only get to the UEFI screen that gives you a choice of PC Info, Date and Time, Management and Exit.
My problem is when I Re write the drive it says “The Media is Write Protected”
After the bootrec rebuild
Total identified windows installation 1
Add installation to boot list?
Yes or no
Same issue i just jump and do chkdsk
My Windows 10 pro doesn't show the Windows logo but directly open the blue screen error.
When i get to the A all part it says system cannot find the file specified
Do I need a USB when booting?
On the last step instead of a 0 I got a 1 with "Total identified Windows installations: 1" what should I do?
same here, what should I do?
My windows startup is just black, and i have a startup menu and its kinda outdated and i dont have this advanced menu option
My problem is that i have not even a option to reset my pc can you help with that?
Thanks this really helped me!
i cant get to the command centre
Hello can u please tell me what yo do if it says add installation to boot list
After the bcdebit con and it’s says there is not enough space how to fix
The System cannot execute the specified program
For me reset this pc also dont work, how can i fix that?
I try used windows bootable usb and an advance setting, go to command line and type " bcdboot c:\windows
I cant Really Access cmd it just wont put me inside This menu
First tip didnt help... can't open this settings menu anymore, when i shutdown and startup my pc 3 times it doesn't change shit, still got the blue screen with the errorcode..
My laptop keeps restarting after an update happened it just says updating then restarts then updating then restarts