Absolutely amazing Martin, for a minute I thought I was watching the Colin Furze channel! I just need to build a mobile version for out on the road 👍👍👍
I changed the way I secure our diy pulling tower - we used chain it to one of the workshops uprights - the new version doesn't need any floor/wall/chain retention - and it works great day to day - you might be interested in how it secures, just a handy way to do it - I stuck up a short vid on my crappy little channel, you'll get the gist if you have a look. Would never have thought of building one without you showing your version - mine has since done a world of work, so thank you for the inspiration. :-) .
Hi James! Thank you for a great comment and your feedback. I could have start making my towers but couldn’t be bothered and would rather help people out showing my tower build. It’s amazing that you built your own…. Welcome to send pics to me if you like dent08@yahoo.com Thanks Martin
Привет Мартин! Отличный упор у тебя! Настоящий мастер и профессионал должен уметь не только работать с профессиональным инструментом, но и уметь его изготавливать. Я очень рад! У нас каждый второй инструмент в гаражной мастерской изготовлен самостоятельно )).
Привет Алексей. Спасибо за ваш комментарий! Я пытался делать инструменты, но у меня нет подходящего оборудования для этого. Думаю, мне нужны тиски и ацетиленовая горелка. молодцы, что делаете инструменты для собственного бизнеса. Я надеюсь, что бизнес также хорошо для вас? спасибо Мартин
Привет Алексей. Мне удалось добавить русские субтитры к моему новому видео, которое скоро выйдет. Я также добавил русские субтитры к своему последнему видео «Will The Dents POP Out». Я не знаю, есть ли у вас время, чтобы проверить это видео и посмотреть, работает ли перевод? вам не нужно смотреть все это, просто 5 минут были бы супер помощью. Тогда я всегда буду добавлять русские и другие субтитры к своим видео. спасибо Мартин
@@dentremover01 Привет! Очень здорово, что появились русские субтитры. Я обязательно посмотрю это видео и в комментарии к нему отвечу. Что касается инструментов, то иногда приходится что-то изготавливать самостоятельно для своих конкретных задач. Для некоторых мастеров эта работа является основным доходом, а для кого-то хобби. Лично для меня кузовной ремонт - это хобби и поэтому я чаще всего инструмент изготавливаю сам.
@@dentremover01 У тебя хорошая мастерская и да, тебе обязательно нужны тиски и ацетиленовая горелка. Если же речь о крючках для PDR, то здесь подойдёт индукционный нагреватель (induction heater).
Привет Алексей. Большое спасибо, что сообщили мне. Я использовал автопереводчик RUclips, чтобы изменить английские субтитры на русские. Было несколько разных русских диалектов на выбор, поэтому я выбрал основной русский. Я не настолько умен, чтобы переводить самостоятельно, и я хотел бы быть мультиязычным! Также да, я согласен с тем, что другие языки откроют мои видео для тех, кто не понимает английский. Я также добавил другие языки в видео. касается изготовления инструментов. У меня есть несколько идей, но определенно нужны тиски. и для других работ моя страховка может вырасти, если я возьму газовую горелку! Еще раз спасибо Мартин
Great work, will definitely be building mine. I especially love the channel attached to the floor. That was the missing piece of the puzzle for me. and solves my problem of buying a traditional body shop pulling tower attached with floor pots. 👏👏👏
Hi Nelson PDR my pleasure if you need any pointers just get intouch. I’m sure all the measurements are on the videos. It’s a very sturdy puller and solid when anchored into the floor Thanks Martin
Great job with the design and ingenuity of this project. I admit I am too lazy to do all that work, I would rather just buy one lol. As a safety precaution, I would throw a towel over the chain during use incase it decides to fly off at one point, don't want to get whipped by a chain.
Hi Javani thank you I really appreciate your comment and recommendation regards the safety. Yes your absolutely correct I use to do this when jigging vehicles and do have a blanket and bungee strap to limit any sudden shock or slap Thanks again and all the best for 2022
@@dentremover01 time is precious my friend, always busy doing something! 😉 hope you got a spare gas bottle in your shop this week, it's freezing out there! 🥶 🥶 🥶
Hi mate, can you please elaborate what final changes you made towards the end of the video? And what porta power you used ? Good stuff mate. Thanks from down under.
Hi Amit. Yes sure do you mean the foot plate and over extension pin? Are you trying to make one yourself? The porta power is a “powerTec” one which is an off the shelf kit
Hi buddy!Am sorry am a real body shop repairer since 37 years!Never seen so weak chain to pull off fenders ok but not a girder!Same for the size of your hydraulic ram too light...
Hi EagleBaldone Tough thanks for your comments and thoughts. Yes I know the chain is a weak one compared to a body repair shop but there’s a big difference in what repairs we carry out, I’m a panel beater too and use to use the dozers, clamps and big chains for pulling chassis legs out, boot floors, sills etc and this chain wouldnt last a second Use if the above on a glue pull repair where we are sticking glue tabs to the panel I’d say it’s a little excessive and a lighter set up would work much better. I’d be extremely suprised if the chain snaps on one of my repairs and il be the first to hold my hand up if it does. As for the karabiners, yes they won’t last long so the screw type are to be used. The ram is rated to 4 tonne and from the repairs I’ve carried out upto now there hasn’t been an Issue In performance I can pump a dent out with one hand no problem. I think only time will tell with this. I put a lot of thought into the tower and I’m confident it will work without any problems for quite a while All the best for 2022 let’s hope it’s better than last year Martin
Please contact Kevin Andrews at Keco Uk in Peterborough. Mention I sent you and you want to ask about glue pulling. He’s a really nice chap and will talk you through everything for sure
Hi Scott thanks for your message. I made the vids and added all the sizes for the project so viewers can make their own. Hope this helps? Thanks Martin
Absolutely amazing Martin, for a minute I thought I was watching the Colin Furze channel! I just need to build a mobile version for out on the road 👍👍👍
Hey Jake! Yes I thought the same too! With all the sparks etc! Colin Furze is a crazy guy!!
Just amazing. You created this pulling tower like you have been doing it all your life. Great video. Thank You
Thanks! i had the idea for a while! it works great
I changed the way I secure our diy pulling tower - we used chain it to one of the workshops uprights - the new version doesn't need any floor/wall/chain retention - and it works great day to day - you might be interested in how it secures, just a handy way to do it - I stuck up a short vid on my crappy little channel, you'll get the gist if you have a look.
Would never have thought of building one without you showing your version - mine has since done a world of work, so thank you for the inspiration. :-) .
Hi James! Thank you for a great comment and your feedback.
I could have start making my towers but couldn’t be bothered and would rather help people out showing my tower build. It’s amazing that you built your own…. Welcome to send pics to me if you like
dent08@yahoo.com
Thanks Martin
Desde Argentina siempre veo tu canal muchas gracias por tu aporte para esta herramienta, tus trabajos son muy buenos. Gracias por todo.
Oi Adolfo obrigado palavras muito gentis de você. Espero que gostem dos meus outros vídeos também. Atenciosamente m, Martin
Wow just great awesome videos and dent puller
Thank you so much Bill
Привет Мартин! Отличный упор у тебя! Настоящий мастер и профессионал должен уметь не только работать с профессиональным инструментом, но и уметь его изготавливать. Я очень рад! У нас каждый второй инструмент в гаражной мастерской изготовлен самостоятельно )).
Привет Алексей.
Спасибо за ваш комментарий! Я пытался делать инструменты, но у меня нет подходящего оборудования для этого. Думаю, мне нужны тиски и ацетиленовая горелка. молодцы, что делаете инструменты для собственного бизнеса. Я надеюсь, что бизнес также хорошо для вас? спасибо Мартин
Привет Алексей. Мне удалось добавить русские субтитры к моему новому видео, которое скоро выйдет. Я также добавил русские субтитры к своему последнему видео «Will The Dents POP Out». Я не знаю, есть ли у вас время, чтобы проверить это видео и посмотреть, работает ли перевод? вам не нужно смотреть все это, просто 5 минут были бы супер помощью. Тогда я всегда буду добавлять русские и другие субтитры к своим видео. спасибо Мартин
@@dentremover01 Привет! Очень здорово, что появились русские субтитры. Я обязательно посмотрю это видео и в комментарии к нему отвечу. Что касается инструментов, то иногда приходится что-то изготавливать самостоятельно для своих конкретных задач. Для некоторых мастеров эта работа является основным доходом, а для кого-то хобби. Лично для меня кузовной ремонт - это хобби и поэтому я чаще всего инструмент изготавливаю сам.
@@dentremover01 У тебя хорошая мастерская и да, тебе обязательно нужны тиски и ацетиленовая горелка. Если же речь о крючках для PDR, то здесь подойдёт индукционный нагреватель (induction heater).
Привет Алексей.
Большое спасибо, что сообщили мне. Я использовал автопереводчик RUclips, чтобы изменить английские субтитры на русские. Было несколько разных русских диалектов на выбор, поэтому я выбрал основной русский. Я не настолько умен, чтобы переводить самостоятельно, и я хотел бы быть мультиязычным! Также да, я согласен с тем, что другие языки откроют мои видео для тех, кто не понимает английский. Я также добавил другие языки в видео.
касается изготовления инструментов. У меня есть несколько идей, но определенно нужны тиски. и для других работ моя страховка может вырасти, если я возьму газовую горелку!
Еще раз спасибо Мартин
Great work, will definitely be building mine. I especially love the channel attached to the floor. That was the missing piece of the puzzle for me. and solves my problem of buying a traditional body shop pulling tower attached with floor pots. 👏👏👏
Hi Nelson PDR my pleasure if you need any pointers just get intouch. I’m sure all the measurements are on the videos. It’s a very sturdy puller and solid when anchored into the floor
Thanks Martin
Did you draw up plans Martin? Awesome bit of kit by the way 🤙🏻🤙🏻🤙🏻 loving your channel.
Aawsom tower well done 👍🛠🛠🛠🛠🛠🛠🛠🛠 star making one thanks 🙏
Superb job, Martin. I think that "another model" has come to the market 😉 Well done! 👌
Thank you Francisco!!
Great tutorial of how to do it Martin. Now I need to make the same tower for my garage ;) 👍
Hi Edmar thank you! Yea get one made it’s definitely worth having one
Hey, Thank you a lot Martin! Great production guide. I really need this thing too :) .'ll do it in the spring! Thank you your sharing dude!
Hi AdamCinematic thank you! Get one made you’ll definitely use it if that’s the kind of repairs you do
All the best for 2022
I love your vids you are a great guy thank you for your time you spend sharing with us
Thank you Tim appreciate your kind words
Martin you nailed it big time mate .Very well done on all levels .Have one hell of an amazing New Year.
Hey Geoffrey thank you! Always seem to smash it at Christmas/New year time lol
Happy new year to you and your family mate cheers 🍻
its been on my mind to build 1 for myself. this is a great idea.
Hi Shivo go for it! Welcome to make one like mine as a few other techs have. If you have a workshop then it’s a must !
Good luck
Great video Martin , I’m a new subscriber and will make one of these pulling points when I get some free time , thanks love your work from Spain
Thanks again for the info!
Great job as always!
Great vid Martin!
Thanks Graham!
Excellent, thank you!!!
like your cup. Love What You Do.
Hi Bill it’s good isn’t it!
I was at a customers and he brought me a drink so I took a pic for Instagram! But it’s a great pic!
All the best for 2022
Thats class Martin
Fantastic!
Thank you! 🙏 I hope it comes in handy for anyone wanting a glue pull tower without spending thousands on one!
Have a great new year
Martin
Great job with the design and ingenuity of this project. I admit I am too lazy to do all that work, I would rather just buy one lol. As a safety precaution, I would throw a towel over the chain during use incase it decides to fly off at one point, don't want to get whipped by a chain.
Hi Javani thank you I really appreciate your comment and recommendation regards the safety. Yes your absolutely correct I use to do this when jigging vehicles and do have a blanket and bungee strap to limit any sudden shock or slap
Thanks again and all the best for 2022
You are awesome, thanks for sharing with you your knolage :)
Crackin job mate, looks awesome 👌
Hey hey you finally got 5 minutes to watch it!!
@@dentremover01 time is precious my friend, always busy doing something! 😉 hope you got a spare gas bottle in your shop this week, it's freezing out there! 🥶 🥶 🥶
Мастер он вовсе мастер! Браво!
Nice work but I think you should name it the power tower much more appropriate haha 🇬🇧💪
Happy new year Bill to you and your family. Yes your right I need a better name! I was thinking something like HULK!
Lol
Hi mate, can you please elaborate what final changes you made towards the end of the video? And what porta power you used ? Good stuff mate. Thanks from down under.
Hi Amit. Yes sure do you mean the foot plate and over extension pin? Are you trying to make one yourself?
The porta power is a “powerTec” one which is an off the shelf kit
Thanks good exelent. Job 👍👍👍👍👍🇺🇲🇺🇲🇺🇲🇺🇲
Nice video 👌🏻 just subbed 👍🏻
Hey Daniel thank you much appreciated 🙌🏼
great content and very informative, makes me want to dust off my old dollies and get back at it
Hi Junior4246 thank you! and Go for it!! aLL THE BEST FOR 2022
Brill job,
Thanks Stephen 🙌🏼
Hi Bro. Could you give the name of the glue did you use to apply to plastic flange ?
Hi Huy, it is Glexo hot glue
You clever sod. 🙏
You' ve been lucky You didn't fall into that mazda with You feet :D Normally is just paint left with no metal behind :D
Haha that Mazda panel flattened like paper!!
👏👏👍
Thank you BK szarama
Thank from Poland 😀
I still think you should market the tower Martin. Lol
Hi James! Oh if I get a break in work I may make one or 2
See what happens! Thanks for watching and commenting and all the best for 2022
@@dentremover01 well I reckon You'll make a killing if ya do lol same to you and the family buddy it
Money money! I like money!
@@dentremover01 hahaha its a rich man's world
good morning
Afternoon Andy!😁
👍👍👍👍
Thanks again
Hi buddy!Am sorry am a real body shop repairer since 37 years!Never seen so weak chain to pull off fenders ok but not a girder!Same for the size of your hydraulic ram too light...
Hi EagleBaldone Tough thanks for your comments and thoughts.
Yes I know the chain is a weak one compared to a body repair shop but there’s a big difference in what repairs we carry out, I’m a panel beater too and use to use the dozers, clamps and big chains for pulling chassis legs out, boot floors, sills etc and this chain wouldnt last a second
Use if the above on a glue pull repair where we are sticking glue tabs to the panel I’d say it’s a little excessive and a lighter set up would work much better.
I’d be extremely suprised if the chain snaps on one of my repairs and il be the first to hold my hand up if it does. As for the karabiners, yes they won’t last long so the screw type are to be used.
The ram is rated to 4 tonne and from the repairs I’ve carried out upto now there hasn’t been an Issue In performance I can pump a dent out with one hand no problem.
I think only time will tell with this. I put a lot of thought into the tower and I’m confident it will work without any problems for quite a while
All the best for 2022 let’s hope it’s better than last year
Martin
What's the best glue Martin?
Hi Paul. My favs are Glexo hot in the winter and Hawg (orange) in the summer (uk climate)
Where's the best place to get them?
The stuff I've bought online has been very poor, could you recommend a seller.
Thanks very much for replying 👍👍👍
@@paulpaintshop103 where do you live? Uk?
Yes Wigan, I have a small restoration shop and I'm interested in pdr to fill the gaps, I'm a Panelbeater by trade.
Please contact Kevin Andrews at Keco Uk in Peterborough.
Mention I sent you and you want to ask about glue pulling. He’s a really nice chap and will talk you through everything for sure
You should sell plans. Or give.
Hi Scott thanks for your message. I made the vids and added all the sizes for the project so viewers can make their own. Hope this helps?
Thanks Martin
fix your sound
Thanks. What part of it?
Thanks. What part of it?