I just bought a real P320.It has an ambidextrous safety.I will get one of these just to teach my wife safe gun handling,prior to the real deal. Cheers. 👌
Great reviews mate, I prefer the p226 cos it has a decocker. Also it has a hammer visible, which is a good thing because it'll indicate when the gas is too low. I just got it, I like it allot.
I own all of the real sig P320s. The only P320 that has a saftey is the M17. You have a replica of the civillian version which has a slide lock and no saftey. Im going to buy this airgun for better dry fire to save money on ammo since 9mm is about 12-18 cents a round.
I have the p250 which is basically the same. It shoots well and accurately but recently the slide doesn't slide as freely as before, feels like something is jamming.
Maybe a screw from the aluminium blocks have opened inside and is being pushed at the side of the slide? Not familiar with the P250 (yet), but I still guess there might not be even a big issue in there. These Sig slides usually do nlt sit that firmly on the lower receiver...
In Cali you can have more than 10 rounds since it is just a pellet gun. That law is just for centerfire and rimfire guns. A pellet gun is not considered a firearm.
hi guys, i bought a sig sauer p320 and a hdr50. I like the grip and weight of the p320 because i had a real 9mm Norinco. I have only one problem with the p320 and that's the button you press to release the mag. If you look at the gun from the back you will see that the pin is longer than the width of the butt,which means if i got gun in my hand and just slightly touch my leg the mag jumps out,if you put the gun on a table with the clip facing down the mag jumps out,i had intruders in my yard one night and when i went out with the p320 i noticed the mag is gone and eventually picked it up on the grass,lucky for me the 2 guys ran away otherwise i wouldv'e been the joke of the year,it's all because the pin is to long. My question is,can i have somebody to file down the pin for me so that it is not so long,gun is cool but that's the only problem i have. The pin is way to long because i looked at real guns and even when i was a cop it wasn't. Is this just my p320 or is there other p320 guns out there with same problem. Thanks- Stephen.
I bought one recently. If I am done with my target practice for the day, but the CO2 cartridge is fresh, can I leave it inserted, or should I take it out? Is it bad for the gun to leave it in?
Its not extremely likely that anything would happen however it is pressurized gas so theres a possibilty that letting it sit for to long could cause problems with the gasket. Its definitely worth loading up and emptying it out before setting it down. Or if you dont want to shoot any more bbs you can always blank shoot it about 40 times or so to release some of the pressure at least. Not suggested but if you dont really care about it to much it probably wont cause any damage. I wouldnt make a habit of it though
Is it my imagination or is there something wrong with my sight? It looked like the blowback function was not consistent with every shot and a few times it looked like the action didn't blowback at all. Nice gun though...
"Shoots like a Sig because it is one" TBH they really shouldn't use that in their marketing. Almost all of the Sig's, rilfles included tend to be seriously lacking given the cost. In fact the only good Sig' pistol seems to be the 1911 WTP and it's not even made by them, it's made under contract by the Airsoft specialist KWC(!). Thanks for the review though.
I bought a P320 from Blades nd Triggers. It's got a good grip and weight to it but i have one problem with it. I don't know if they come out of factories like it. The button you press to release the clip sticks out very far on the side. If i put gun in holster and i am not very careful the button touches holster and the clip jumps out to the ground or if i put gun on table the same thing happens otherwise gun very cool but now can't use it. When night i heard somebody in my yard and when i drew my gun there was no clip. i asked around if somebody can just make it shorter but nobody can help not even shop where i bought it. Any advice pl because gun is now just lying in wardrobe and i went to buy me a HDR50.
I cant help noticing the slide blowback only works about 20% of the time and when blowback pistols are more expensive then this needs to be at least 20% cheaper
it works every time. because it happens quickly the camera doesnt show it every time - frame rates etc... if it was a high speed camera you'd see it each time. james
It does not look like the blow-back was realistic. My .22 LR Walther P22 seems to have more blow-back than this air gun. Does it feel anywhere like a real gun, in your opinion? I'm looking for a decent air gun for trigger practice indoors.
to be completely honest; as someone thats fired 9mm's etc, its good recoil for an air pistol, but nowhere near that on a powder burner. it would be comparable at best to a .22lr, but not as strong. james
do you recommend to shoot bbs with this one? my local store says i can shoot both(bbs and pellets), but i had heard that the bbs can damage the rifled barrel
Hi James , whot a great detailed review. Very nice looking pistol. Thank you for your work , great stuff . Also very nice countryside your in . Cheers Simon
I own the real steel P320 and getting a CAA Roni kit for it. I wonder if the air gun is compatible with the RONI kit lmao. Time to test it when I get it!
Ive tested 2 different pellet types and bbs. If you use bbs make sure to push them in all the way(i used a q-tip for easy access) and they tend to fire more consitently and i found a little bit better accuracy at about 10-12 yards. Mind, I never shot any without pushing them in all the way because i found great success with my first test of pushing them in. Any further than about 12 yards maybe 15 then the weight of the bb tends to be to light and pellets fair better.
Hi James, hope your good mate, your too easily pleased sometimes on accuracy mate, these are quite awful in my opinion not a great airgun and as you say definitely not a great replica.. Happy shooting mate 👍 ATB Marc
Ultor ~ I bought the tan and the black versions many months back, and have had no jamming problems with the original 30-round magazines. I have not tried the 20-round mags. If your jamming occurs after many shots, it may be that the CO2 cartridge has insufficient gas left. Best to put in a new cannister after 30 shots, i.e. a new cannister with every magazine load. However, if you're experiencing pellet jams with a full or nearly-full CO2 tube, try different pellets. Avoid all long pellets: stick with wadcutters. Finally, why not take or send the gun back to the gun shop for their analysis, testing and advice? You could also try contacting the manufacturers. Btw, out of some two dozen air pistols I've bought in the past few years, nine of them have developed problems and three have been replaced ! I've bought from several different gun dealers and have stayed with the recognized, leading manufacturers. Recommended pellets: Apolo Champion Apolo Domed ProShot Practice Bisley Practice Good luck, friend, don't give up
Baught this gun today, dropped about 40 rounds into the backyard shed door. After 40 rounds the bullets started bouncing back at me off the door. (insufficient pressure) At 5m I got a hand sized grouping. The shop was out of ammo for this gun so they started tearing open other pellet gun boxes and giving me the included ammo that came with other guns. Even though their was about 4 brands of .177 CAL on their shelves. The salesman said that those pellets where too long and would cause jams and might affect the life span of the magazine. Gun did not jam once Well untill I stuck some Bear Grills .177 Pidgeon killers in the mag.
Wait a minute lad doesn’t the word “liberal” come from the root of “Liberty” which means freedom? Hence liberals should be freedom loving and letting people do whatever it is they want. Isn’t it?
Liberals are no such thing. They have become a fascist organization. And Google, RUclips, Facebook and Twitter, are their ministry of propaganda that spreads their agenda. Joseph Goebbels would be proud.
I shoot USPSA 9mm. I shoot the P320 X5 in carry optics. I bought this gun to only practice swingers in my back yard on half size targets so 7 yards is about where i shoot from. Shoot my 9mm approx. 50,000 rounds a year, hard to get excited about an air pistol.
I feel so bad for you non americans..... afraid to even speak about the mag... never shot the the real gun.:( come on over man we are not perfect by any means but at least you'd be FREE.
ReplicaReviews we can have guns in Almost all of Europe aswell🤷🏻♂️, the only difference is that the laws are usually strickter and that in most countries using them for self-defence is not allowed. We can buy an AR or an AK. No problem, lot’s of paperwork though. Lol
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
to stop jams ,use silicon grease on the links in the mag
Thanks for the tip, I'll try this.
I'm looking at buying one what pellets would you recommend
I just bought a real P320.It has an ambidextrous safety.I will get one of these just to teach my wife safe gun handling,prior to the real deal. Cheers. 👌
It has one of the best barrels I've ever seen on a replica
Solid review, practical, thanks. I just ordered one of these up just for gun handling familiarity.
Thanks!
Great reviews mate, I prefer the p226 cos it has a decocker. Also it has a hammer visible, which is a good thing because it'll indicate when the gas is too low. I just got it, I like it allot.
I own all of the real sig P320s. The only
P320 that has a saftey is the M17. You have a replica of the civillian version which has a slide lock and no saftey. Im going to buy this airgun for better dry fire to save money on ammo since 9mm is about 12-18 cents a round.
I have the p250 which is basically the same. It shoots well and accurately but recently the slide doesn't slide as freely as before, feels like something is jamming.
look at you're previous comment.... then think.... just think about it....
Maybe a screw from the aluminium blocks have opened inside and is being pushed at the side of the slide?
Not familiar with the P250 (yet), but I still guess there might not be even a big issue in there. These Sig slides usually do nlt sit that firmly on the lower receiver...
In Cali you can have more than 10 rounds since it is just a pellet gun. That law is just for centerfire and rimfire guns. A pellet gun is not considered a firearm.
It is in Chicago
When it gets stuck, use cleaning rod for .177 to push it back, carefully. Oh take off co2 first.
Great review man!
Thanks!
I think Sig had to add the safety for the US contract, it's not normally there.
Good to know not to attempt firing when CO2 is too low. 👍🏽
thanks
I'm thinking of getting onex how would I k ow?
New canister every 2 mags!
Mine did well til the last of the co2. No issues. Good to know.😎👍
hi guys, i bought a sig sauer p320 and a hdr50. I like the grip and weight of the p320 because i had a real 9mm Norinco. I have only one problem with the p320 and that's the button you press to release the mag. If you look at the gun from the back you will see that the pin is longer than the width of the butt,which means if i got gun in my hand and just slightly touch my leg the mag jumps out,if you put the gun on a table with the clip facing down the mag jumps out,i had intruders in my yard one night and when i went out with the p320 i noticed the mag is gone and eventually picked it up on the grass,lucky for me the 2 guys ran away otherwise i wouldv'e been the joke of the year,it's all because the pin is to long. My question is,can i have somebody to file down the pin for me so that it is not so long,gun is cool but that's the only problem i have. The pin is way to long because i looked at real guns and even when i was a cop it wasn't. Is this just my p320 or is there other p320 guns out there with same problem. Thanks- Stephen.
THE TRIGGER IS VERY JUMPY AND HEAVY
Nice tips!
✌🏻👍🏻
I bought one recently. If I am done with my target practice for the day, but the CO2 cartridge is fresh, can I leave it inserted, or should I take it out? Is it bad for the gun to leave it in?
Its not extremely likely that anything would happen however it is pressurized gas so theres a possibilty that letting it sit for to long could cause problems with the gasket. Its definitely worth loading up and emptying it out before setting it down. Or if you dont want to shoot any more bbs you can always blank shoot it about 40 times or so to release some of the pressure at least. Not suggested but if you dont really care about it to much it probably wont cause any damage. I wouldnt make a habit of it though
Or pellets*
I fired this gun and a few others earlier today for the first time :)
Awesome!
Can I use BB instead of pellets?
if the mag doesnt come out just punch a stick in it to seat pellet back in the link ,and ive taken mine apart several times ,its easy !
Is it my imagination or is there something wrong with my sight? It looked like the blowback function was not consistent with every shot and a few times it looked like the action didn't blowback at all. Nice gun though...
Hello, good vídeo and good CO2 weapon. I would like to know how many times it shoots, more or less, with a single CO2 capsule. Thank you.
You guys find out yet?
Correct - no safety on the real P320. Good review man.
Thanks!
Hi James, good to see your videos. Thank you for your reports.
"Shoots like a Sig because it is one"
TBH they really shouldn't use that in their marketing. Almost all of the Sig's, rilfles included tend to be seriously lacking given the cost. In fact the only good Sig' pistol seems to be the 1911 WTP and it's not even made by them, it's made under contract by the Airsoft specialist KWC(!).
Thanks for the review though.
I bought a P320 from Blades nd Triggers. It's got a good grip and weight to it but i have one problem with it. I don't know if they come out of factories like it. The button you press to release the clip sticks out very far on the side. If i put gun in holster and i am not very careful the button touches holster and the clip jumps out to the ground or if i put gun on table the same thing happens otherwise gun very cool but now can't use it. When night i heard somebody in my yard and when i drew my gun there was no clip. i asked around if somebody can just make it shorter but nobody can help not even shop where i bought it. Any advice pl because gun is now just lying in wardrobe and i went to buy me a HDR50.
I cant help noticing the slide blowback only works about 20% of the time and when blowback pistols are more expensive then this needs to be at least 20% cheaper
it works every time. because it happens quickly the camera doesnt show it every time - frame rates etc... if it was a high speed camera you'd see it each time. james
Open ur eyes
Good review,....,told almost what I wanted to know, exception..... is the barrel steel and is it rifled?
Yes & yes
@@ReplicaReviews Thanks for the answer ( shows you DO answer question even to old ( 2.5 year old videos ) Thank you.
P320 , X Five or PT 85 ? Which is best for power delivery ?
The pt85 is quite powerful but I don’t know
I shoot until pellet is trapped in the barrel, all i have to do is use a wooden stick and push it til it falls off magazine port
Do I need to put Pellfunoil on the top of cylinder Co2?
It does not look like the blow-back was realistic. My .22 LR Walther P22 seems to have more blow-back than this air gun. Does it feel anywhere like a real gun, in your opinion?
I'm looking for a decent air gun for trigger practice indoors.
to be completely honest; as someone thats fired 9mm's etc, its good recoil for an air pistol, but nowhere near that on a powder burner. it would be comparable at best to a .22lr, but not as strong. james
How do I know that the CO2 is low?
do you recommend to shoot bbs with this one? my local store says i can shoot both(bbs and pellets), but i had heard that the bbs can damage the rifled barrel
you can shoot them as far as i know - i tend to stick with pellets....
Question are u able to put a scope on it i have the same one
Is it true that the charger is stuck?
Hi James , whot a great detailed review. Very nice looking pistol. Thank you for your work , great stuff . Also very nice countryside your in . Cheers Simon
Simon Noble I wouldn’t recommend it.
I own the real steel P320 and getting a CAA Roni kit for it. I wonder if the air gun is compatible with the RONI kit lmao. Time to test it when I get it!
That could be great fun if it works!
where can i buy it from in the uk
and is it legal to carry if its unloaded
Its not legal to carry any firearm; airguns included, in the uk - regardless of if its loaded or not.
my 320 doesnt have a safety but you can get one with a safety
Hello! Is it field strippable?
Hi! I’ve not tried but doesn’t appear to be, not easily
What is the best pellet air pistol up to £250? (uk) thank you
take a look at the umarex range. something like the cp99 or even the cp88 would be my chosen options. james
@@ReplicaReviews cheers mate. I'll have a look
Is it duel shoots bb and pellets
Not this one no.
it can use both bbs and pellet no problem
Ive tested 2 different pellet types and bbs. If you use bbs make sure to push them in all the way(i used a q-tip for easy access) and they tend to fire more consitently and i found a little bit better accuracy at about 10-12 yards. Mind, I never shot any without pushing them in all the way because i found great success with my first test of pushing them in. Any further than about 12 yards maybe 15 then the weight of the bb tends to be to light and pellets fair better.
@@shon1872 hi I shoot mine without pushing them in and it shoots just fine :) but thanks for informing me to push them in
Using bbs
160th like and 36th comment so early lol. #awake #22:03pm ❤️😀
Nice Bro
Thanks
i believe tokio marui the airsoft manufacturer make these for sig
interesting... havent seen that before.
Can it hit a man sized target at 30m?
can't say i've tried?
So is it always double-action?
yes
Well yes, there’s no hammer. It has an internal pin
I clicked on this video specifically for information on the magazine.............bummer...
its almost identical to the MPX / MCX range, uses a belt system within the mag. i've covered it over on our facebook page . james
Gary Loger: its 30 rounds, there are 20 round magazines as well
Don’t lift your finger off of the trigger between each shot, you’ll have better and more consistent shot placement
I have a x5 and keeps jamming no matter what pellet I put through it. Got a replacement today and after 45 shots it jammed. Any thoughts. Thanks
Dupont chain lube or any silicon bike chain lubricant.
Mine has a lot of jamming issues
RUclips doesn't like cartridge magazines but has millions of violent videos 🤔🤨
Go figure.... #liberallogic
👍 to the hat 😊
I have the p320. I love it. I also have the canebrake rattler. Love it also. I find it is very accurate at 10yrds(3 meters)
What size pellets?
.177
@@ReplicaReviews thx
Hi James, hope your good mate, your too easily pleased sometimes on accuracy mate, these are quite awful in my opinion not a great airgun and as you say definitely not a great replica.. Happy shooting mate 👍
ATB Marc
Wish my Full size P320 .40 was that quite
wish my P320 was .40... haha
awful product, I regret so much buying that garbage. Jam like hell (just have a look to us forum). Badly made, inaccurate a complete crap...
Seconded.
Ultor ~ I bought the tan and the black versions many months back, and have had no jamming problems with the original 30-round magazines. I have not tried the 20-round mags. If your jamming occurs after many shots, it may be that the CO2 cartridge has insufficient gas left. Best to put in a new cannister after 30 shots, i.e. a new cannister with every magazine load.
However, if you're experiencing pellet jams with a full or nearly-full CO2 tube, try different pellets. Avoid all long pellets: stick with wadcutters.
Finally, why not take or send the gun back to the gun shop for their analysis, testing and advice? You could also try contacting the manufacturers.
Btw, out of some two dozen air pistols I've bought in the past few years, nine of them have developed problems and three have been replaced ! I've bought from several different gun dealers and have stayed with the recognized, leading manufacturers.
Recommended pellets: Apolo Champion Apolo Domed ProShot Practice
Bisley Practice Good luck, friend, don't give up
Thanks for your advice! Regards mate.
Baught this gun today, dropped about 40 rounds into the backyard shed door.
After 40 rounds the bullets started bouncing back at me off the door. (insufficient pressure)
At 5m I got a hand sized grouping.
The shop was out of ammo for this gun so they started tearing open other pellet gun boxes and giving me the included ammo that came with other guns.
Even though their was about 4 brands of .177 CAL on their shelves.
The salesman said that those pellets where too long and would cause jams and might affect the life span of the magazine.
Gun did not jam once
Well untill I stuck some Bear Grills .177 Pidgeon killers in the mag.
Wait a minute lad doesn’t the word “liberal” come from the root of “Liberty” which means freedom? Hence liberals should be freedom loving and letting people do whatever it is they want. Isn’t it?
Liberals are no such thing. They have become a fascist organization. And Google, RUclips, Facebook and Twitter, are their ministry of propaganda that spreads their agenda. Joseph Goebbels would be proud.
@@Joe-rx7ht I don't watch Fox so-called news either. Now, back to pellet guns....
I shoot USPSA 9mm. I shoot the P320 X5 in carry optics. I bought this gun to only practice swingers in my back yard on half size targets so 7 yards is about where i shoot from. Shoot my 9mm approx. 50,000 rounds a year, hard to get excited about an air pistol.
I don’t think RUclips cares about high cap pellet guns. And in CA high capacity is no longer limited.
Would I be able to fire plastic .25 gram bbs from it
really?? the answer is no...
Hey sir im serios
Just got a p320. The most underwhelming gun ever produced. Pathetic toy.
Lemon pistol?. Mine is a shark.
The 9mm P320 doesn't have that safety catch (a.k.a Thumb Safety Lever).
Sx 😁
Sig=crap!
Boi sig sauer is one of the best gun companies ever
Real world vs UK.
That blowback looks atrocious
I feel so bad for you non americans..... afraid to even speak about the mag... never shot the the real gun.:( come on over man we are not perfect by any means but at least you'd be FREE.
There are other countries were guns are legal other than the U.S; some of them even have better gun laws than the U.S .
Terrible blowback, different every shot if at all.
That’s pathetic ))
I think Bruce Lee could snatch them out of the air 😂
JAKE SMITH I don’t think Bruce Lee will be doing much of anything ever again
What's with all the Brits telling us about guns. They have about a few thousand in all of the UK and we have 300 Million !
Whats with all the yanks insisting they’re the only ones with a gun community? Do some research 🙄
Dickheads like you give yanks a bad name!
unfortunately it seems to be a common theme from US commenters...
ReplicaReviews we can have guns in Almost all of Europe aswell🤷🏻♂️, the only difference is that the laws are usually strickter and that in most countries using them for self-defence is not allowed. We can buy an AR or an AK. No problem, lot’s of paperwork though. Lol