Great ideas and very well made. Thanks. I saw a video saying that to prevent knee injury when doing leg extensions the seat should cover the hamstring and be close to the back of the knee. Could you advise how to accommodate this when using your bench or when building yours from scratch? Thanks
Hmmm... I would cut the seat to 300mm wide × 400mm long to make sure it comes out further. I would also ensure that the edge is covered up with matting so that it feels comfortable on your hamstrings
Great video, but I’m missing what are the lengths of the 2 pieces 70mm x 45mm pine cut for the leg frame, then attached together with the 200mm x 70mm flat bracket? 2:19 minutes Thanks, Ted
I know what you mean. I'm making this project and I'm not mm savy. You;d think he could answer such a simple question. Not everyone is knowledgeable about Euro measurements.
@@MattLees-Nunan Does it matter if the castor wheel says max capacity is 40kg? That doesn't matter does it since the wood and bench is holding most of the weight right?
Any chance we can get a video of you using this bench to do standing leg curls? I want to see how efficient it would be using the front leg extension part but to do standing leg curls. I am deciding to either create just a lying leg curl part or just a standing leg curl part.
Olá from Madeira Portugal. Amazing!!exactly what I want!! Can you please make one for me and send to my home address?... How much it cost?? 😁I can't buy one, no one sends to my island, already lost money... Can you send all measures in Portuguese? Thanks
Hey bro can you make a video of you using the bench for a dummbell Chest press and incline press while the leg attachment is still on and then show you detaching the leg curl and then doing the flat and incline press? Would be good to see the difference and how easy it is or isn't using it without detaching.
Hi! Hmmm....I've never had that much on there, so I wouldn't be able to say yes or no. It might be a matter of trialling a little bit at a time to see how it goes. You may find that amount of weight could cause the front to lean forward... in this case, maybe attaching the back to the floor or putting something heavy over the top of the back leg would be helpful.
This is awesome! Im super impressed with your channel and the fact that your sharing this info to benefit everyone. My hat goes off to you sir!!
Thank you so much! That really makes my day and I'm glad you appreciate what I'm doing❤😊
Excelente muchas gracias por ese gran video saludos desde Tlalnepantla México
This is great man....cheers from Texas !
Glad you like mate😊
Yay thank you so much for sharing I will make this on the weekend!
Can't wait to see it! @mattnunan if you feel like sharing a photo😊
I love this man. Your brain and work ethic is just beautiful! 😍😍 I love it man 😩😩🙌🏽
Thanks again!😍
Great ideas and very well made. Thanks. I saw a video saying that to prevent knee injury when doing leg extensions the seat should cover the hamstring and be close to the back of the knee. Could you advise how to accommodate this when using your bench or when building yours from scratch? Thanks
Hmmm... I would cut the seat to 300mm wide × 400mm long to make sure it comes out further. I would also ensure that the edge is covered up with matting so that it feels comfortable on your hamstrings
@@MattLees-Nunan Thanks for your reply Matt. Is the size you just mentioned the same size you suggest in the video?
Excellent work. Thanks for the video.
You're welcome! Thanks for watching❤️
Great video, but I’m missing what are the lengths of the 2 pieces 70mm x 45mm pine cut for the leg frame, then attached together with the 200mm x 70mm flat bracket? 2:19 minutes
Thanks, Ted
Hi Ted, thank you very much! There should be a full list of materials in the description of the video. Let me know if you have any other questions👍
I know what you mean. I'm making this project and I'm not mm savy. You;d think he could answer such a simple question. Not everyone is knowledgeable about Euro measurements.
That’s the best diy hamstring setup on RUclips respect man.
Can you load it up with enough weight to give your hamstrings a solid blast??
Thank you🙏 Yeah definitely. I get 55kg on there but to add more weight; all you need to do is make the tubing longer so you can add extra weight.
@@MattLees-Nunan Does it matter if the castor wheel says max capacity is 40kg? That doesn't matter does it since the wood and bench is holding most of the weight right?
@@fightermma that's fine bro!
Looks excellent!
Thanks! It's been a handy machine in the IsoGym😍
Thank you sir today I maked two items very useful
Nice idea but you can’t put much weight the hinge from the wheel holder would probably break.
What makes you say that can I ask?
ruclips.net/video/GIzlKQppPfo/видео.html
I love your idea 😍, very nice 🤟
Thank you, I hope it helps😊
@@MattLees-Nunan yes very helpful 🙇♂️
Simple perfect 👍 video! Very good job, I will make it like this thank you so much!
Awesome!!
So i know what size to order... Thanks
Thanks for the video
awesome! very good! thanks!
You're welcome! Thanks for watching Arquimed😊
Alguém pode passar os nomes dos materiais em português por favor
Are you enjoying your home gym? It looks do awesome
Absolutely. It's my sanctuary😍
How much weight and how many sets and reps do you do for muscle growth?
Usually 3-5 sets of 10-12 reps💪😊
@@MattLees-Nunan how much weight?
It really depends on the individual. DM me on insta😊
What's your height? 🤔😊
I'm 6ft tall
ruclips.net/video/GIzlKQppPfo/видео.html
Any chance we can get a video of you using this bench to do standing leg curls? I want to see how efficient it would be using the front leg extension part but to do standing leg curls. I am deciding to either create just a lying leg curl part or just a standing leg curl part.
ruclips.net/video/GIzlKQppPfo/видео.html
@@williamdDF Thanks
Olá from Madeira Portugal. Amazing!!exactly what I want!! Can you please make one for me and send to my home address?... How much it cost?? 😁I can't buy one, no one sends to my island, already lost money... Can you send all measures in Portuguese? Thanks
👍👍👏👏Tks....Good luck....
Excelente. Parabèns
Hey bro can you make a video of you using the bench for a dummbell Chest press and incline press while the leg attachment is still on and then show you detaching the leg curl and then doing the flat and incline press? Would be good to see the difference and how easy it is or isn't using it without detaching.
Hey, sorry about the late reply! I can't now unfortunately as it is in a friend's gym
3:20 what are those spark glasses called?
Just safety goggles
May I know the max weight tolerance of that hinge? Can you put like 100kg on that?
The most I've had on it is 60kg
Can you use copper tubing instead of the galvanised steel tube you used or would that be too weak?
Copper is a great idea. Just very expensive😯
@@MattLees-Nunan I'm just struggling to find pipes. We have different terms here in the UK for different tools and materials.
Yeah, I can imagine it's harder over there. Well, I suppose if it's thick enough then it's fine👌
@@MattLees-Nunan I just don't want the copper to bend. Maybe a conduit pipe would be better.
@@fightermma look for "Threaded Pipe zinc Coated" or "Galvanised Malleable Iron threaded Pipe" on Ebay or Amazon that's what i used.
You have muscle. That is what muscle looks like.
Cheers mate, Eat big, sleep big, lift big and meditation is where it's at😊
how much load can this thing take? lets say i wanna add 91kg on it, can it take that? and it would be proportional to the one in the gyms?
Hi! Hmmm....I've never had that much on there, so I wouldn't be able to say yes or no. It might be a matter of trialling a little bit at a time to see how it goes. You may find that amount of weight could cause the front to lean forward... in this case, maybe attaching the back to the floor or putting something heavy over the top of the back leg would be helpful.
@@MattLees-Nunan yo wassup, alright thank you so much for replying appreciate it man
@mineget2608 not a problem at all! Let me know if you need anything else
Perfect
Thank you😊
How do you detach the leg curl from the bench? Can you detach it without tools?
Yep! Easily done without tools. The eyelit bolt just needs to be hand-tight👌
ruclips.net/video/GIzlKQppPfo/видео.html
@@williamdDF Thank you
Que bom ideia amei
great idea for these days.
Thank you🙏
Such a bad ass !!
You know it😎
Can you provide the measurements for the height it needs to be please?
Sure! 300mm😊
Price kitna
Sorry, could you please expand on kitna?
What is the maximum weight that this could handle?
What the max weight you can leg curl or do for leg extensions?
With this one, I can put 50kg on there but you can always extend the bar out further to load more weight on!
Very good🙏🔥👍
CHEERS😁
How wide is thebench
300mm😊
How many inches is the directional wheel sir?
1.77 inches🙂
@@MattLees-Nunan how about the 5inches sir? I think that 5inches is body where the screw to put, is it okay 5inches?
@@nilmarpatagoc8760 Yes, sir!
What's the size/diameter of the caster wheel?
100mm and rated for 200kg bro😊
Maestro
dimensions in cm please ??
Hmmm... could you maybe just subtract a zero from each measurement?🤔
@@MattLees-Nunan Thank you
Superrrr🙏😜🔥
🔥❤
👍👍👍👍👍
02:26
Re re bueno 👏 👏
👏👏👏
Gracias😊
Para eso están lo gimnasios modernos
Exactamente hermano!😁
Nice work! I built one too but mine was built out of metal. I'd like some feedback if you could (its on my channel)
Awesome! Will check it out!
Noooo!!!!!
The colors LGTB+....
Hi! What does LGTB mean,🤔
What's the max amount of plates you can load on there?
On this I can put 50kg but to add more weight all you need to do is make the metal tubing which holds the plates longer👍
🔥❤