RAM REBEL AMBER DRL PROGRAMMING *HOW TO GUIDE*

Поделиться
HTML-код
  • Опубликовано: 23 авг 2024
  • Detailed guide on how to change your DRL Locations on your Ram 1500 DT via ALFA OBD
    Items Required For this Video Can Be Purchased On
    www.weekndgara...
    Instagram: @weekndgarage
    Email: weekndgarage@gmail.com

Комментарии • 70

  • @singhgill3735
    @singhgill3735 Год назад +2

    Thats what i was looking for.
    Can u make video abt mirrors folding and unfolding when u press lock and unlock on key ?
    Thx

  • @bruce88wayne
    @bruce88wayne 5 месяцев назад +1

    Not bad. I opted for Tazer instead. This seems to do the trick too, though.

    • @WeekndGarage
      @WeekndGarage  5 месяцев назад +1

      Tazer once you unplug it, you lose all tazer functions until you plug it back in, also this doesn't take up the OBD port onboard. Both works tho

  • @remigielis
    @remigielis Месяц назад +1

    Thx brother, I love it how turned out

    • @WeekndGarage
      @WeekndGarage  Месяц назад

      Any time brother!

    • @remigielis
      @remigielis Месяц назад

      @@WeekndGarage btw I have my secondary “funcart” fiat 500 abarth, do you have any light mods on it?
      Since app is made for FCs…

    • @WeekndGarage
      @WeekndGarage  29 дней назад +1

      @@remigielis Haven’t tried directly on the fiat 500, you can play around with the settings make sure you backup the original profile before making changes

  • @313tfd
    @313tfd Месяц назад +1

    It may be in the comments, but can you change the halo to amber?

    • @WeekndGarage
      @WeekndGarage  Месяц назад

      You could change the DRL to the turn signal, if you wana turn the whole halo to amber you gotta swap out the actual LED board in the headlight housing

  • @KarbonSym
    @KarbonSym 2 месяца назад +1

    Does that program have the Dodge Charger in it? In the 23 Charger the DRLs turn amber to signal a turn and I want to run them in Amber constantly as DRL

    • @WeekndGarage
      @WeekndGarage  2 месяца назад

      Yep does the 23 charger as well, same back end BCM

  • @RekonRC
    @RekonRC Год назад +1

    Can you add program the bed lights with this?

  • @MrJazz8469
    @MrJazz8469 2 года назад +2

    Once programming is finished, are the 2 connectors to be reconnected to their original terminal and Alfa OBD and connector to be removed?

    • @patrick012182
      @patrick012182 Год назад

      From my experience, removing the OBD is fine, but removing the harness caused an error

  • @allontario
    @allontario Год назад +1

    How do you make the halo amber, I did it a While ago on a TRX and I can't figure it out for the life of me

  • @jafigueroa4728
    @jafigueroa4728 2 года назад

    Awesome. I have a 2019 Ram 1500. The Halo bottom left light is out. How can I fix it or can I turn them off. I would prefer to fix it. Thanks

  • @gabrielbadimvilela
    @gabrielbadimvilela Год назад +1

    I saw that u r using the AlfaOBD to code, but which OBD Bluetooth conector r u using to pair with the app?

  • @Livinlife2
    @Livinlife2 5 месяцев назад

    How do you enable fog lights with just the white halo? If I set drl to no. It gives white halos. Should I change drl
    Location to fog lights and then enable drl again?

  • @chuckbilly907
    @chuckbilly907 Год назад

    great video. Is this only for the led light package or the halogen too?

  • @SpartanFitnessPro
    @SpartanFitnessPro Год назад +3

    What are you running for exhaust? Sounds badass!

    • @WeekndGarage
      @WeekndGarage  Год назад

      Thankyou! its a Flowmaster 717915 Remote Valved Exhaust

  • @Egosuppressor
    @Egosuppressor 8 месяцев назад

    Can I do that to a lower trim halogen headlights? I got 2021 Bighorn

  • @zellcarl
    @zellcarl Год назад

    great Vid ,thanks. can you change programing to fold in mirrors in when parked

  • @carlosperez-jt3wb
    @carlosperez-jt3wb 11 месяцев назад

    I am technologically challenged/disabled so please help. Which of the many OBD apps do download into my iphone ?? Thanks

    • @WeekndGarage
      @WeekndGarage  11 месяцев назад

      This app is only on Android devices not on iPhone

  • @ayyy9017
    @ayyy9017 Год назад

    Will you be able to drive with the drl off?

  • @MrJeduardoc7
    @MrJeduardoc7 Год назад

    Do you know for mirror running lights?

  • @jg4u2call
    @jg4u2call Год назад

    Nice. Which programmer is it? Where can I get it?

  • @taresch0310
    @taresch0310 6 месяцев назад

    When I followed the Steps the Amber Lights will g o on for about 1 second and then shut off immediatly... any idea? I put it on optional and turn signal..

    • @WeekndGarage
      @WeekndGarage  6 месяцев назад

      When the engine is on or when it’s in just Ignition on mode?

    • @taresch0310
      @taresch0310 6 месяцев назад

      When the engine is then started@@WeekndGarage

  • @neho_itme
    @neho_itme Год назад

    I have limited ram 2500 it will work?

  • @tpaz4
    @tpaz4 11 месяцев назад

    Do you know what the difference between “optional DRL” and “no DRL” is?

    • @WeekndGarage
      @WeekndGarage  9 месяцев назад

      Optional follows the programming on the DRL location setting. No DRL is no DRL at all

  • @fredA1234
    @fredA1234 Год назад +1

    Where do I buy the programmer?

    • @dieselfred8084
      @dieselfred8084 Год назад

      It's just a app on playstore

    • @fredA1234
      @fredA1234 Год назад

      Thank you but What I meant was the OBD connector that was plugged into the cable. The cable was listed, but not the OBD connector.

  • @christopherbriceno7434
    @christopherbriceno7434 2 года назад +1

    Will this work on a 2019 ram rebel ?

  • @Thepirloagas
    @Thepirloagas Год назад +1

    What app do you use for ios?

  • @billys4446
    @billys4446 Год назад

    Do you know if this works on all models of ram 5th gen trucks ? I currently have the Hemi 1500 bighorn with aftermarket lighting

    • @MSchumacherfan
      @MSchumacherfan 10 месяцев назад

      I did the same change with JScan on my 2020 but the drl only shows when in motion

  • @randyknafel5951
    @randyknafel5951 Год назад

    Do you install the plugs back in module when you get your programming done?

  • @singhgill3735
    @singhgill3735 Год назад

    Any one knows what configuration to change. When u lock truck i want mirrors to fold and when unlock they should open

  • @MrJazz8469
    @MrJazz8469 2 года назад +1

    Where can I buy this alfa obd and the bypass connector. Can I call you, I’m from Vancouver…

    • @WeekndGarage
      @WeekndGarage  2 года назад +1

      Send me an email weekndgarage@gmail.com

    • @MrJazz8469
      @MrJazz8469 2 года назад

      @@WeekndGarage I sent you an email dated 17 and 18 July 2022 respectively. For info I already bought the OBD and connector and android pad as well and both the app, only programming is remaining. If I can call you or call me is better. Thanks

    • @karldence2549
      @karldence2549 Год назад

      Do you have a link for the alpha obd?

  • @BWLightGuy
    @BWLightGuy 5 месяцев назад

    Still working on it

    • @WeekndGarage
      @WeekndGarage  5 месяцев назад

      I think you may of missed a step, because the demo vehicle is a 2020 Rebel mate

    • @BWLightGuy
      @BWLightGuy 5 месяцев назад +1

      @@WeekndGarage i appreciate the response! I'll have to try it again! It keeps saying that the vehicle is already set with the turn signals as the drl. But it's not. I'll try again! Thank you!

    • @BWLightGuy
      @BWLightGuy 4 месяца назад

      Turns out I didn't go in to settings on the infotainment center and turn the DRLs on. It worked! Thanks for being patient !

  • @torredcat4395
    @torredcat4395 2 года назад

    Can you do just the amber without the white halo’s?

    • @WeekndGarage
      @WeekndGarage  2 года назад

      Not sure about to completely turning them off but you can definitely dim the white halos down to 1/4th of the brightness

    • @RobertBambach
      @RobertBambach 2 года назад +2

      @@WeekndGarage Can your make the white halo DRLs brighter than factory setting? mine always seem barley noticeable during the day. is factory value like 1/2 brightness or is it already at 100% default ?

  • @apkhatri
    @apkhatri 2 года назад

    Do you think you could find a way to keep the puddle lights on or the approach lights

  • @shutkibbles1749
    @shutkibbles1749 2 года назад

    Do you have a link to the dongle so I can buy this?

  • @terryreedy107
    @terryreedy107 Год назад

    Can you program sequential blinkers with Alpha ODB?

  • @J2010Kramer
    @J2010Kramer Год назад

    I followed the steps and nothing is changing....

    • @WeekndGarage
      @WeekndGarage  Год назад

      Power cycle ignition, you can only see the drls when the engine is on, there also has to be enough ambient light so the truck thinks it’s a sunny day

    • @J2010Kramer
      @J2010Kramer Год назад

      ​@WeekndGarage my white signature lights have always been my DLR's. But when following these steps and selecting the turn signals as DLR the white lights are still the only ones on...

    • @WeekndGarage
      @WeekndGarage  Год назад

      Try restarting the procedure it definitely works for ram DT models, you have the SGW bypass plugged in?

    • @J2010Kramer
      @J2010Kramer Год назад

      ​@@WeekndGaragesilly me. I had DRL turned off in the radio menu. Now my question is, can make so just me amber lights are my DRL and have the white lights off?

    • @WeekndGarage
      @WeekndGarage  Год назад

      @@J2010Kramer Check out my video called how to turn off Halos DRL Ram 1500