Looked hi and low on RUclips for the place to find the Corsa D clutch bleed nipple and found it here. So obvious - dunno how I missed it but your video cleared up a lot of stuff. Many thanks, Tom! 👍
Thanks for sharing. Handy to know. I need to do this job on my car also. At least I know what to expect. Pity the video wasn’t finished on the job, but get the idea.
Thanks for the reply Tom I was very impressed with your cruise control videos, you really should train as an auto electrician or motor vehicle technician because you have got it mate.. I have been in the trade a long time and you would be a great asset to the motor trade.. I know talent when i rarely see it.. just think about Tom. All the best and keep up the good work on here.
Very helpful short film mate. A lot people would of thought it’s an issue with clutch itself. How would you change the full slave cylinder, is it screwed in? Thanks man
A good idea is to go a to a local breakers where they let you get the bits off yourself and get a many of these clips (and clips really) as possible, trust me. nothing worse than the clip flying away into oblivion and needing to wait days for a replacement. EZbleed kit, £20ish,well worth it, just keep the pressure around 15 psi and you'll be fine.
Hi mate hope you see this I’m having an issue with bleeding my clutch at the end when you was pumping did it start to build up pressure as i need to try this method
It does indeed build pressure, it takes a while though so do not worry. It feels horrible like the clutch is a floppy pedal. It will build the pressur up
My hydraulic pump seems to pop off after bleeding i dont get why the seal and clip is fine but after ive bled the clutch a few pumps of the clutch and its pops off again any help???
Hi Tom, Great Videos very well done mate keep them coming.. can you recomend where to get a good opcom from please, either an eBay trusted seller or local uk seller. I’m in East Yorkshire.
splonkjiz Hey splonkjiz, thank you very much. I bought my opcom off trusted Ebay seller. I looked at the ratings as they were trust worthy. Although my opcom was the china clone, as i wanted to save money.
Looked hi and low on RUclips for the place to find the Corsa D clutch bleed nipple and found it here. So obvious - dunno how I missed it but your video cleared up a lot of stuff. Many thanks, Tom! 👍
You are a legend! I’m replacing my clutch and flywheel but I couldn’t find the bleed procedure anywhere! Nice one
Thanks for sharing. Handy to know. I need to do this job on my car also. At least I know what to expect. Pity the video wasn’t finished on the job, but get the idea.
Thanks for the reply Tom I was very impressed with your cruise control videos, you really should train as an auto electrician or motor vehicle technician because you have got it mate.. I have been in the trade a long time and you would be a great asset to the motor trade.. I know talent when i rarely see it.. just think about Tom. All the best and keep up the good work on here.
Thank you very much, that is really what id like to professionally train in to be honest.
ty for all your good videos on the corsa.i just love that car.
Hello, what is the part number I can’t make it out on the paper?
Very helpful short film mate. A lot people would of thought it’s an issue with clutch itself.
How would you change the full slave cylinder, is it screwed in? Thanks man
Was this for the clutch judder when on the biting point? Im suffering with it on my 2008 1.2 corsa D
Looks like the F17 gearbox. Ill be trying this fix to see if my clutch judder goes
A good idea is to go a to a local breakers where they let you get the bits off yourself and get a many of these clips (and clips really) as possible, trust me. nothing worse than the clip flying away into oblivion and needing to wait days for a replacement. EZbleed kit, £20ish,well worth it, just keep the pressure around 15 psi and you'll be fine.
O ring this is 6x1,8 mm is also available in industry for 10cent thanks for video.
Tom are you able to provide us with the dimensions of the oring?
Hi Tom
Do you have the size of the clear pipe? Have the same issue on my 12 plate Corsa
I cant remember to be honest, I bout it from halfords. I just approximated it really for the nipple size.
Hi Matthew, did you find out in the end the size of the pipe? About to do my brakes/clutch bleeding too.
Thanks 👍🏻
Thank you mate really helpful respect
Please assist me with that thing inside gear box that's hold that plastic black thing that we blow for clutch
You are brilliant great vidio
Thanks a lot this really helped me.
Hi mate hope you see this I’m having an issue with bleeding my clutch at the end when you was pumping did it start to build up pressure as i need to try this method
It does indeed build pressure, it takes a while though so do not worry. It feels horrible like the clutch is a floppy pedal. It will build the pressur up
My clutch is not building pressure back up. Been pumping for 20 mins
@@zamak3538 fluid must not leak
After pumping the clutch for ages. Still not building pressure.
My hydraulic pump seems to pop off after bleeding i dont get why the seal and clip is fine but after ive bled the clutch a few pumps of the clutch and its pops off again any help???
You must ensure you have pushed it on enough and also that you put the metal clip back on .
Hey tom awesome video what is the part the line gose in to ??
Vauxhall clutch actuator elbow, should get it
Legend mate.
had to order the part from uk as im in aus looking forward to the replacement
So what is the part number
Hallo,
What is the size for this O ring
Thanks
Hi Tom, Great Videos very well done mate keep them coming.. can you recomend where to get a good opcom from please, either an eBay trusted seller or local uk seller. I’m in East Yorkshire.
splonkjiz Hey splonkjiz, thank you very much. I bought my opcom off trusted Ebay seller. I looked at the ratings as they were trust worthy. Although my opcom was the china clone, as i wanted to save money.
Can you do a Corsa d alternator
Thanks a lot
Hey Tom. Great video mate. Any chance you can pop the part number in response to this comment
Not building up pressure
£4.45!!! You can get a box of 100 off eBay for £1.95 all different sizes
Yeah you are so right!
Hi tom
What is the actual line called that goes into the actuator elbow I need to replace that
Here is a link to a diagram with the part numbers. opel.7zap.com/en/car/s07/e/8/3-1/#14
hi what is the part number, thanks
90511437
hi thanks so much, at vauxhall they said there is no such thing. i will ask again tomorrow now with part number
Just take the oring out and go with that, thats what i did. Unless you cant that is which is understandable.
Thank you.www.drive2.ru/l/561627242006843307/