How To Install Protect 68 Kit Valve Body Upgrade Kit
HTML-код
- Опубликовано: 20 сен 2018
- How to properly install Protect 68 valve body upgrade kit for the 68RFE Dodge 6.7L Cummins.
Shop Now USA: bit.ly/2mnm1h3
Shop Now Canada: bit.ly/2mnmxM1 
Авто/Мото
Make sure the linkage in the trans is lined up like it was when you removed the VB or you can break off the linkage and you have to completely disassemble the trans to replace that linkage if you break it ❤️❤️
I wonder how many times this video has re-started @11:10? Holy shit though, the transition from this dude talking about transmissions to that ass was kinda startling.
You were not alone! I thought I was the only pervert in here!
I have the 68 Kit Valve Body Upgrade Kit and custom tunes, what can i expect as far as up shifting and downshifting with my 68RFE?
Hello i have durango 2011 AWD . I have problems in trans shift clicking from D to N . All gears fine and drive . Helpe me to rebuild my trans . I can change problem parts. Which the part ? tell me please
I bought my kit 1030373 from XDP for my 2010 a month ago it didn’t come with the 2 gaskets. Came with clutch feed seal, separator plate, Pan gasket, 2 check balls and a accumulator plate. Used EFI for tuning so far no problems. Curious why it didn’t come with the 2 additional gaskets.
Tommy Parella most likely the newer bonded separator plate in your kit
Other than pulling it out and measuring, how can I tell whether or not I need the .420 or .453 ssv bore repair kit? My protect68 will be here tomorrow and I ordered the .453 repair kit, only to find out there are two options. I neeeeeeed heeeeelllppp! I don't want to have to pull it apart only to find out I have the wrong ssv kit. My truck is a 2015 with a gray solenoid pack.
As long as it’s the original valve body it will be the 0.453 SSV bore repair kit, however if the valve body has been remanufactured in any way you will have to measure it.
Ats has you beat.
White solenoid pack 2015 truck had 5 check balls . I installed 7. Now truck immediately faults out p0871 no lock up
2015 truck calls for a grey solenoid pack. At about 6 min said install 6 balls not seven. I did the 68 protect kit on my 09 3500. Didn't work for me. Bought revmax valve body all good now.
I have a 2017 68rfe. Has grey solenoid pack. 5 check balls. What is the 6th check ball for? What happends when you don't put it in? Thanks
Great question.
The early model valve bodies have a white connector on the solenoid pack and utilize seven check balls because they use a separate passage way for the overdrive and multi-select within the solenoid pack.
The later model valve bodies have a grey connector on the solenoid pack and utilize 5 check balls because they combine the overdrive and multi-select operation within the solenoid pack.
BD Diesel was able to share one modified bonded separator plate on early and late model valve bodies. We accomplished this by adding a sixth check ball to the late model valve bodies with the grey connector that closes off the overdrive passage in the separator plate. We did this so that the solenoid body can still control overdrive through the multi-select passage as it would have done in the stock application. Not installing the sixth check ball would cause a loss of control to the overdrive clutch pack potentially causing damage.
Curious what the purpose is for the vent hole that he drilled?
Pro trick: you can watch series at Kaldrostream. Me and my gf have been using it for watching all kinds of movies during the lockdown.
@Nickolas Bowen Definitely, I've been using Flixzone} for since december myself =)
@Nickolas Bowen Yup, I've been watching on Flixzone} for since december myself :)
why do you drill a vent hole in the back half of the valve body ? is it in the overdrive return circuit
It is needed to vent a circuit that we modify with our plate. If it is not done the line pressure will not be controlled correctly.
@@BDDieselPerformance it dosent need to be performed unless one is installing your specific kit? im curious as to how does your kit controls line pressure and how it affects the overdrive clutch pack(allready prone to failure)
At about 9:00 min said replace clutch seals and moved on without any further instructions .
PLEASE PLEASE HELP, how do you know if you missed the shift linkage and the d10 positions. mine goes PARK/REVERSE/REVERSE(neutral)/PARK(DRIVE)/PARK(2)/PARK(1) im losing my mind i cant figure it out
Give our tech support dept a call 1-800-887-5030
Isn't that a recall from Ram.....I got a letter in the mail a couple of weeks ago that ram will fix for free