this time lapsed vídeo explains step by step a BSI reset in a Peugeot 3008 hdi 2011 but it Works on all peugeot and Citroen from 2004 onwards. subscribe have new videos daily
Probably because he misinterpreted it, logically sidelights should be indicators since they are indicating turning "side" and flashing on "side" of a vehicle, it's not logical to call headlights "sidelights".
thanks for watching did you get the correct Can Bus tow module installed? The module can be damaged? do they have another to make sure? left indicator not working on the car or the trailler or both?
Hi, i have issues with my 308 from 2012. The climate control panel shutting on and off randomly... mostly being off, this also shut ups the entire climate control, ac fans and everything. Any idea why? could this be a BSI problem
Does this work for Peugeot 208 1.5 2013? My car shows engine error message, fuel injection light is on, and enfine fan is on all the time, car does not pass 1500-2000rpm, I changed the spark plug set, cleaned the fuel tank because I thought it was on bad fuel (here in Brazil fuel sucks), do you have any idea what it could be?
Hello .peugeot 407, I replaced the factory radio with an android one, I don't have a parking radar since. Would this procedure fix the error? Thanks for the answer.
Thanks for watching. I am afraid not my friend The oem parking sensors work via the factory radio...however you can fit a android radio with a CAN decoder especific for Peugeot and the parking sensors will work again. It all depends on what kind of stereo you fitted.
Actually you do not need a helper: with the battery on open driver's window -> remove the key -> exit the car -> close the door -> disconnect/reconnect the battery with the delay -> turn the lights on through the driver's window without opening the door -> ingnition on/off -> open the door and open/close the car with the remote control -> start he car. Its better to use the main (large) key, not the small one.
Eu tenho um Citroën c3 que depois da troca da batteria do telecomando não funciona mais a abertura e fechamento das portas, já tentei um milhão de vezes a sincronização e nada funciona, esse procedimento è igual para o c3? Obrigado.
@@PSICompanyPerformance bro my Citroen c3 not starting , I trying to move gear cable and remove it from inhibitor switch and return it again but car light battery on dashboard and car not starting is this procedure work for this case ?
@@mohammadsuleiman-yd2ji thanks for watching i think that your problem is related to the gear selector. thats is damaged and not comunicating with the ecu and the bsi so i dont think that this will work for you.
Peugeot beeper uses Fiat Qubo electronics its not actually a citroen based car... if your mileage is flashing you need to do the (proxy alignment) with a diagnostic tool... Many tools do this these days.
The reason in this case was that we removed the semi/automatic gear box to replace the clutch and then the alternator wasnt charging after all the plugs were reconnected, after the reset everything worked as it should... In PSA cars (peugeot and citroen) sometimes the BSI starts to throw ramdom electrical faults or bugs and usually this reset solves these bugs.
Thank you for posting the video. I have a question I own a Peugeot 407 year 2009 petrol 1.8. My question would be I want calibration relearn my throttle body.if I would do the same bsi reset of what you did would it work ? Thank you in advance
@@easyrider020 there are same cars that it works i dont know if it works on french cars though. I never do it like that since i have nice diagnostic tools but i will Try that some time
Hi, I have a 2008 Peugeot 207 SW 1.6 HDI. While using a OBD2 to connect to the ECU, the app says it cannot connect to the ECU. Would a BSI reset fix this, or could it fix it? I have no errors on the on-board computer, nor any warning lights on. Good video, by the way.
Thanks for watching. There are plenty of obd adapters that are not compatible with the communication protocol of Peugeot and Citroen cars because these use Kline, CAN and VAN protocols...so the BSI reset would not solve this, you should try another obd machine and i am sure it will work. Good luck
Este procedimento faz reset ao BSI Nao ao conta quilometros Mas existe a opçao de fazer o reset aos consumos. Quando estiver a ver os consumos carregue no botao 0,0 no conta quilometros durante uns 2 segundos e ele volta a zeros
What are the indications for doint he BSI reset? I removed the fap filter, and the mechanic did something with the software, so do you know will i have any problems if i do the bsi reset on my peugeot 407? (my display is going crazy right now, it restarts every few seconds, have some warnings that not exist any more etc.)
Marco o que ele diz é ligares a ingnição durante 3 minutos e não mexes em nada,depois pedes alguem para desligar o borno da bateria durante 15segundos, voltas a conectar e esperas 10segundos.Passado esses 10 segundos ligas o pisca do carro para a esquerda e ligas a ignição .Esta feito o reset.
@@hpengine4280 noutro video feito por um rapaz brasileiro,ele primeiro baixa o vidro do condutor ,por estar sozinho a fazer o procedimento e nenhuma porta deve ser aberta durante o procedimento.
He did it with 2 people if you are alone pull front window down because all tgat is important to you is that you dont wake up the bsi by opening the doors. Thats so you can be outside the car and do everything thru window.
The problem was that we replaced the clutch is this car that uses one of those crazy robot manual gear boxes that peugeot calls automatic and we had to disconnect several components and also the battery in order to get to it. After all was assembled the car was showing the battery light in cluster and was not charging the battery. After this all was just fine.
@@samuelibrahimovic8508 well, lets just say that i would never buy a car with this type of gear box and clutch, first because it doesnt feel right driving and also because of its reliabillity, its similar to a regular manual clutch but it works overtime and it causes premature wear.
Hello, I have changed the battery on my 3008 as it wasn't keeping charge. I followed the instructions in the manual for completing this. I have now come to start the car and it won't. There are error messages of brake failure, parking brake failure, it won't turn over and mileage showing at 0000. Help needed please. Thanks.
Do you have a diagnostic computer to read the codes. Are all the fuses good...next to the battery there are a couple of big fuses are those ok? That should not happen...only if you swap the poles in the battery or there a spike in current or something like that. This procedure is used almost every day by me and always works perfect.
Why do you say you turn on the sidelights when instead you use the turning indicators?
Probably because he misinterpreted it, logically sidelights should be indicators since they are indicating turning "side" and flashing on "side" of a vehicle, it's not logical to call headlights "sidelights".
He's from Portugal, for Christ Sake!
also works if you turn the headlights on. funciona tb se ligar os farois em vez da seta.
I have peugeot expert 2008 today i went to tow bar shop for wiring and module.. but now rear left indicator not working.. any help pls
thanks for watching
did you get the correct Can Bus tow module installed?
The module can be damaged? do they have another to make sure?
left indicator not working on the car or the trailler or both?
Hi, i have issues with my 308 from 2012. The climate control panel shutting on and off randomly... mostly being off, this also shut ups the entire climate control, ac fans and everything. Any idea why? could this be a BSI problem
i hate peugeots !
Does this work for Peugeot 208 1.5 2013? My car shows engine error message, fuel injection light is on, and enfine fan is on all the time, car does not pass 1500-2000rpm, I changed the spark plug set, cleaned the fuel tank because I thought it was on bad fuel (here in Brazil fuel sucks), do you have any idea what it could be?
My friend you should plug your car to a diag machine, this procedure ia for BSI reset but you are describing other issues.
This could be oil filter. This “light grey cube” is mounted top left side of your front hood.
@@Piniron69 It was bad gasoline, I had to remove it all from the gas tank.
Hello .peugeot 407, I replaced the factory radio with an android one, I don't have a parking radar since. Would this procedure fix the error? Thanks for the answer.
Thanks for watching.
I am afraid not my friend
The oem parking sensors work via the factory radio...however you can fit a android radio with a CAN decoder especific for Peugeot and the parking sensors will work again.
It all depends on what kind of stereo you fitted.
Batery light was on when it was supposed to. The baterry light was off when it was supposed to... jeez
the batery was not supposed to be on with the engine running, and this case it was.
after the reset all was good, it was on when it supposed to.
I only have the spare key without electronic button. Can I use the "analog" key for this?
thanks for watching
yes aslong as that key is able to start the car, it works.
good luck
@@PSICompanyPerformance thank you!
No entiendo las indicaciones en español ??
iam sorry but i dont speak spanish
Actually you do not need a helper: with the battery on open driver's window -> remove the key -> exit the car -> close the door -> disconnect/reconnect the battery with the delay -> turn the lights on through the driver's window without opening the door -> ingnition on/off -> open the door and open/close the car with the remote control -> start he car. Its better to use the main (large) key, not the small one.
Misha Kaplan it didn't work for me...i still habe the economic mode...
Well this worked for me. Here is my source:
www.bentasker.co.uk/documentation/vehicles/275-citroen-c5-bsi-reset
i have lost my Peugeot remote control , can i use metal hard key for the reset?
Sorry, have no idea. I guess not. since it has to be kept in the ignition switch. I assume you will need the official software to reset.
Misha Kaplan thank you so much
Hi, if I want to reset this sign ⚠️ it's the same procedure?
thanks for watching
no my friend
this for reset of the BSI, in your case i would do a diagnostic first.
good luck
Reset your service mileage
Eu tenho um Citroën c3 que depois da troca da batteria do telecomando não funciona mais a abertura e fechamento das portas, já tentei um milhão de vezes a sincronização e nada funciona, esse procedimento è igual para o c3?
Obrigado.
obrigado por ver o video.
sim este procedimento funciona em todos os Citroen e Peugeot com BSI.
@@PSICompanyPerformance bro my Citroen c3 not starting , I trying to move gear cable and remove it from inhibitor switch and return it again but car light battery on dashboard and car not starting is this procedure work for this case ?
also gear on screen give 2 small dashes no letters !
@@mohammadsuleiman-yd2ji thanks for watching
i think that your problem is related to the gear selector. thats is damaged and not comunicating with the ecu and the bsi so i dont think that this will work for you.
@@PSICompanyPerformance thanks bro
I tried to remove selector the 2 bolts damaged dunno how to remove these 2 bolts
Hi, nice video. Help me a lot. Do you have any idea about Peugeot Bipper?
Flashing milage.
Thanks
Peugeot beeper uses Fiat Qubo electronics its not actually a citroen based car... if your mileage is flashing you need to do the (proxy alignment) with a diagnostic tool...
Many tools do this these days.
Does this reset the learned adaptions of the ECU ?
Does this clear fault codes?
Many thanks
Thanks for watching.
No it does not...
This is for the BSI, for the engine ECU you need to do it via Diag equipment.
Good luck.
@@PSICompanyPerformance Ok thanks for the quick reply!
What IS the reason to reset ???
Thanks
The reason in this case was that we removed the semi/automatic gear box to replace the clutch and then the alternator wasnt charging after all the plugs were reconnected, after the reset everything worked as it should...
In PSA cars (peugeot and citroen) sometimes the BSI starts to throw ramdom electrical faults or bugs and usually this reset solves these bugs.
@@PSICompanyPerformance Oh so if our 307 has electrical problems this might fix it ?
Just one lead ?
Thanks for watching.
Yes one lead is enough for this procedure.
Thank you for posting the video.
I have a question I own a Peugeot 407 year 2009 petrol 1.8.
My question would be I want calibration relearn my throttle body.if I would do the same bsi reset of what you did would it work ? Thank you in advance
No iam afraid not my friend.
Throttle is controlled by ECU and not BSI.
You need a diagnostic tool for that.
@@PSICompanyPerformance what if I would disconnect the battery over a night ?
@@easyrider020 there are same cars that it works i dont know if it works on french cars though.
I never do it like that since i have nice diagnostic tools but i will
Try that some time
@@PSICompanyPerformance thank you
Hi, I have a 2008 Peugeot 207 SW 1.6 HDI. While using a OBD2 to connect to the ECU, the app says it cannot connect to the ECU. Would a BSI reset fix this, or could it fix it? I have no errors on the on-board computer, nor any warning lights on. Good video, by the way.
Thanks for watching.
There are plenty of obd adapters that are not compatible with the communication protocol of Peugeot and Citroen cars because these use Kline, CAN and VAN protocols...so the BSI reset would not solve this, you should try another obd machine and i am sure it will work. Good luck
Este procedimento faz reset ao computador de bordo?
Interessava me meter os consumos a zero pois acho que já não está a contar
Este procedimento faz reset ao BSI
Nao ao conta quilometros
Mas existe a opçao de fazer o reset aos consumos.
Quando estiver a ver os consumos carregue no botao 0,0 no conta quilometros durante uns 2 segundos e ele volta a zeros
Text for me step bay step russia please dont anderstand
What are the indications for doint he BSI reset?
I removed the fap filter, and the mechanic did something with the software, so do you know will i have any problems if i do the bsi reset on my peugeot 407? (my display is going crazy right now, it restarts every few seconds, have some warnings that not exist any more etc.)
No problem at all
This procedure is for reset the BSI and it does nothing to the ECU wich is were the mecanic made the changes for the FAP or DPF
Ola
Sao do Norte do País ?
Nao estamos no Algarve
Good information. I do not understand very well de English. Can you send me the step by step for this procedure wrintting it,please.
Marco o que ele diz é ligares a ingnição durante 3 minutos e não mexes em nada,depois pedes alguem para desligar o borno da bateria durante 15segundos, voltas a conectar e esperas 10segundos.Passado esses 10 segundos ligas o pisca do carro para a esquerda e ligas a ignição .Esta feito o reset.
@@hpengine4280 noutro video feito por um rapaz brasileiro,ele primeiro baixa o vidro do condutor ,por estar sozinho a fazer o procedimento e nenhuma porta deve ser aberta durante o procedimento.
@@hpengine4280 no 'canal Francamente'
Best.
Thanks
What the Peugeot its this?
this is 3008 but its similar to all peugeot and citroen
I cannot reset the cam dephaser after chaining chain with my solus legend
The problem is, why does car need it? The root cause is important.
Why didn't you pull right window all the way down?
He did it with 2 people if you are alone pull front window down because all tgat is important to you is that you dont wake up the bsi by opening the doors. Thats so you can be outside the car and do everything thru window.
The problem was that we replaced the clutch is this car that uses one of those crazy robot manual gear boxes that peugeot calls automatic and we had to disconnect several components and also the battery in order to get to it.
After all was assembled the car was showing the battery light in cluster and was not charging the battery. After this all was just fine.
@@PSICompanyPerformancewhat you know more about that kind of Clutch and what you think about it ?
@@samuelibrahimovic8508 well, lets just say that i would never buy a car with this type of gear box and clutch, first because it doesnt feel right driving and also because of its reliabillity, its similar to a regular manual clutch but it works overtime and it causes premature wear.
It's French car. That's the root cause... 🙂
Hello,
I have changed the battery on my 3008 as it wasn't keeping charge. I followed the instructions in the manual for completing this.
I have now come to start the car and it won't.
There are error messages of brake failure, parking brake failure, it won't turn over and mileage showing at 0000.
Help needed please. Thanks.
Do you have a diagnostic computer to read the codes.
Are all the fuses good...next to the battery there are a couple of big fuses are those ok?
That should not happen...only if you swap the poles in the battery or there a spike in current or something like that.
This procedure is used almost every day by me and always works perfect.
Bonjour j'ai le meme probleme après avoir changé ma batterie comme l'avez vous résolu ? Merci