How To: Whirlpool/KitchenAid/Maytag Shaft Seal WP356427
HTML-код
- Опубликовано: 6 сен 2018
- How To Replace: Whirlpool/KitchenAid/Maytag Shaft Seal WP356427 www.appliancepartspros.com/wh...
Symptoms: oily, rusty water running down agitator and transmission.
Tools: 7/16" socket with ratchet and extension, Phillips screwdriver, flathead screwdriver, pliers, towel, spanner wrench, rubber mallet, penetrating oil, 1/4" nut driver, 1/2" socket with ratchet and extension, 5/16" socket with ratchet, putty knife, kerosene, brush, turbine oil, 11/16" socket, gasket sealer, gear oil, shaft seal (wp91939), grease, 3/4" pvc pipe, 3/4" socket, liquid soap.
This Whirlpool/KitchenAid/Maytag made Washer Shaft Seal replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: 356427, 62683, 62684, PS11741857, B004XL0IQ8, B00DM8KIKO, B0123MNPZ4, B008DJXTJO, B008DJXTZ8.
Buy the new Washer Shaft Seal WP356427 here: www.appliancepartspros.com/wh...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros 
Хобби
I have never seen such clear, concise explanations of doing a repair as this tech gave in his video. Very well done.
Thank you!
Great video! You guys have everything! Thanks for posting. I learned a lot. I had to laugh when you said this was a relatively easy job then you proceeded to completely take the entire washer apart. You and I have different definitions of relatively easy! 😊
As a technician in the field. I want do all that in a cx home. I would replace the whole transmission assy. Nice video
Thanx guys very helpful.
Common 90 weight gear oil used on standard transmission cars is an acceptable substitute for the gearcase oil. Much cheaper
Thank you.
Thank you for the tip.
Gracias
Very Good!... #22 ✝ {11-9-2022}
Ok so we are replacing the upper seal on the Basket Drive Spin Tube on our Maytag Centennial MVWC6ESWW1 washer. We may need to look again, but when my dad took the upper seal out (the one with the rubber) he said there was not another seal underneath that one. Unless he missed it, did our model not have a second seal?
My Roper washer doesn't have that seal either.
10:03 how does this seal prevent water from leaking from the tub? Like it would just prevent water from infiltrating the transmission once it already escaped the tub
It doesn't there's a tub seal for that.
This is so confusing. So how many seals did you have to put into the tube?
Yea, I lost count of the seals being used. It seems you used old ones to drive in new ones, but the distinction got blurred. How many seals were used in the tube?
what is turbine oil and why is it needed?
How many seals actually went in the top of the tube? Looked like four.
3 I think. 1 356427 and then I believe he stacked 2 new 91939's together and just used the old 91939 as a tool to help install them.
Iam from Indonesia, how get this part
Move out of india
what is part number of old TOP seal (the one with longer lip)? (above the oil seal WP356427)
91939
So you are actually ordering two seals each of 356427? and two each of 91939? Also there is a seal not mentioned the lower seal for the spline tube which is part number 91938 which I would also replace since I had the whole dang thing apart.
It appears that you would only need one of each from what it appears. We try our best to make a video for each part to help give you a general idea on how to replace that particular part. Part number 91938 has its own video for a repair.
19:00
Is there something we can help you with?
Definitely. Thanks for asking. My model is wtw5100vq2, I have totally confused myself, but I was thinking mine only had 1 shaft seal not two. The part was so corroded, gunked up, and falling apart up that I couldn't tell what was going on. Does my model need two shaft seals or just the one?
It appears that your model does have two shaft seals. One is going to be located in the break and drive tube area and the other one is located in the gearcase.
It doesn't worth the pain to replace those parts, buy their parts, and get involve in so many troubles with those people to change the wrong parts they send you. Better buy a new one. I just bought a new washer for $700, brand new with one year warranty from the store, free shipping and installed. ten years warranty from company: Of course, not the same Brand. I tried to repair this Kenmore 600S and I just spend $240 plus all the pain to replace this and now the part is a wrong one, so tried to figure out HOW MUCH TROUBLE FOR WHAT?
I do apologize for any issues you are having with your order. If you can provide your order number we will be happy to look into this issue for you.
@@appliancepartspros You only care about order #? is your website, your customer services, the way you guys respond, the stupid form you ask to fill out, etc. I though it will be a good idea to buy there but I'm really disappointed 100%. I just did a mistake. I went to Sears and buy the correct part. keep the money
I'm sorry for the problems you have experienced. If you are needing assistance with your order, we will need the order number to look it up so we can help resolve the issue. If you don't have that information we can look it up with the email address you put on the order. Let us know if you still need assistance.