I'm just planning to relocate the heads on a Adams13. Love the idea of gravity drain to sea, great schematics and the whole project looks to be of a very high standard. I can see myself revisiting this video as a source of reference. Thankyou.
Really nice work. That new vanity setup looks fresh and modern. I have similar void under the vanity which I think could be used for the holding tank. Thanks for sharing your setup, given me ideas,
Love what you did with the waste tank. We have put one in under the v berth, but have a problem with emptying the toilet, either over board or into the waste tank. It drains ever so slowly and when flushing the toilet bowl fills up. Before we put in the holding tank, it worked perfectly. Any hinds how to fix it. Thanks
Hi Darren. Corian was easy enough to work with using normal drill bits and router. Seems to have bonded well to the bench and bowl using Sika. Total cost (including new electric toilet, all deck fittings, thru hulls, hoses, valves, taps, new hose clamps etc, pumps and holding tank) ~$1800
Hi Chris. Under the holding tank is a PVC ball valve (Philmac) from the local hardware store irrigation section. About AUD $30. It attaches to the bottom of the tank via a through hull fitting. The other valve in the system is a Jabsco Y valve to send waste directly overboard or to the tank.
I'm just planning to relocate the heads on a Adams13. Love the idea of gravity drain to sea, great schematics and the whole project looks to be of a very high standard. I can see myself revisiting this video as a source of reference. Thankyou.
You did a great job! 👏🏻
Really nice work. That new vanity setup looks fresh and modern.
I have similar void under the vanity which I think could be used for the holding tank. Thanks for sharing your setup, given me ideas,
All the best with your installation!
Love what you did with the waste tank.
We have put one in under the v berth, but have a problem with emptying the toilet, either over board or into the waste tank. It drains ever so slowly and when flushing the toilet bowl fills up.
Before we put in the holding tank, it worked perfectly.
Any hinds how to fix it. Thanks
That’s a neat job! How did you find working with the corian? And what do you think it cost you for the whole job? Thanks!
Hi Darren. Corian was easy enough to work with using normal drill bits and router. Seems to have bonded well to the bench and bowl using Sika. Total cost (including new electric toilet, all deck fittings, thru hulls, hoses, valves, taps, new hose clamps etc, pumps and holding tank) ~$1800
Thank you! That’s good to know
Thanks for the video. What type/brand of drain valve did you use?
Hi Chris. Under the holding tank is a PVC ball valve (Philmac) from the local hardware store irrigation section. About AUD $30. It attaches to the bottom of the tank via a through hull fitting.
The other valve in the system is a Jabsco Y valve to send waste directly overboard or to the tank.
Is there a materials list for this video???
Hi Chuck. No materials list but happy to answer a few questions. Cheers