how i have hdpe but the black sheet used for fisheries farms less weight than water how can i bend it to be exactly 90 degrees ???? i mean if i bended it at 90 when it cools it may reach 97 or 100
Hi Moh, the following information was provided by our technical department in response to your question. The only way you will get any acceptable consistency is to have a select temperature and time the temperature is applied to the piece, a consistent mold/fixture/jig used to create the radius, and the same cooling time before the piece is removed from the jig/fixture/mold. Other factors: Small variations from our production lot (variables could be small fluctuations in gauge and differing amounts of latent stress left in the sheet) and direction of the piece relative to the sheet it was cut from (direction should be kept the same for like pieces if possible). Despite these small variations, if you dial in the process you should be able to get acceptable consistency. Please feel free to contact us directly with any further questions at www.kingplastic.com through our "contact us" page.
Can this be used to make a fish tank aquaculture? If so, can it handle saltwater, or just freshwater. Seems to me if it can work on a bottom of a boat, should be able to make a waterproof box out of it. Is it more cost effective than building a tank out of fiberglass?
Thanks for the question, Jay. King Plastic manufactures the sheet. There are fabricators that have made bait tanks made from King Plastic material. If you have additional questions, please contact the technical department at 941-493-5502. As for cost-effectiveness, you'll need to contact a distributor for pricing information. See our "Where to Buy" page at www.kingplastic.com/where-to-buy/
Drywall is a standard building material for indoor building applications. Although a higher price point, King StarBoard® ST has advantages for applications in wet areas, as well as harsh outdoor environments. The HDPE sheets are UV stabilized and waterproof. King StarBoard® ST is also a high-impact resistant material and has been used as hospital wall panels in hallways to protect the drywall from becoming damaged. We encourage you to learn more at www.kingplastic.com/products/king-starboard-st/
Thanks in a million. Great content. Awesome imagination. Grade: A++💥
Thank you!
What kind for leg brace?
how i have hdpe but the black sheet used for fisheries farms
less weight than water
how can i bend it to be exactly 90 degrees ????
i mean if i bended it at 90 when it cools it may reach 97 or 100
Hi Moh, the following information was provided by our technical department in response to your question.
The only way you will get any acceptable consistency is to have a select temperature and time the temperature is applied to the piece, a consistent mold/fixture/jig used to create the radius, and the same cooling time before the piece is removed from the jig/fixture/mold.
Other factors: Small variations from our production lot (variables could be small fluctuations in gauge and differing amounts of latent stress left in the sheet) and direction of the piece relative to the sheet it was cut from (direction should be kept the same for like pieces if possible). Despite these small variations, if you dial in the process you should be able to get acceptable consistency.
Please feel free to contact us directly with any further questions at www.kingplastic.com through our "contact us" page.
Is it good for building a boat?
Yes, check out King StarBoard® family of products at www.kingplastic.com
@@KingplasticCorp thank you
Can this be used to make a fish tank aquaculture? If so, can it handle saltwater, or just freshwater. Seems to me if it can work on a bottom of a boat, should be able to make a waterproof box out of it. Is it more cost effective than building a tank out of fiberglass?
Thanks for the question, Jay. King Plastic manufactures the sheet. There are fabricators that have made bait tanks made from King Plastic material. If you have additional questions, please contact the technical department at 941-493-5502. As for cost-effectiveness, you'll need to contact a distributor for pricing information. See our "Where to Buy" page at www.kingplastic.com/where-to-buy/
❤good❤
Do you have in California
Yes. Please visit www.kingplastic.com/where-to-buy/
How to bend in polygon type
Please see video, thanks ruclips.net/video/dNYMahYWlXE/видео.html
Do you provide services in India
We have distributors worldwide. Please email sales@kingplastic.com. Thanks
is this available in australia?
Yes. Brunger Exports handles our distribution outside the U.S.A. and can be reached at Info@Brungerexport.com
Can it be used instead of drywall?
It has been used in a wide variety of applications including wall panels.
expensive drywall
@@Previalegendits advertised as cheaper than traditional drywall.
Drywall is a standard building material for indoor building applications. Although a higher price point, King StarBoard® ST has advantages for applications in wet areas, as well as harsh outdoor environments. The HDPE sheets are UV stabilized and waterproof. King StarBoard® ST is also a high-impact resistant material and has been used as hospital wall panels in hallways to protect the drywall from becoming damaged. We encourage you to learn more at www.kingplastic.com/products/king-starboard-st/
❤supwr❤
Contact details please
www.kingplastic.com/contact-us/