FINALLY! someone else that runs an Aimpoint on a Scalarworks with a Unity FTC. I personally run mine with a Comp m5b. Looks so much sexier than the standard unity riser
Rad video and info as usual duders. One note, he’s using tegris not carbon fiber. It’s similar in weave but the tegris is malleable compared to brittle carbon fiber.
Regarding the placement of medical kit, The cargo pocket idea is great and I'm sure you and your team knows that it is there, this comment is more for the people that may try to copy/paste your idea. It's a better idea to have your IFAK marked and in an easy to locate/access location. If you stuff your IFAK in your cargo, and your team isn't very aware that this is where you keep it then it could be bad. Same goes with spreading your IFAK contents throughout a chest rig. If you aren't a part of a team that trains together regularly and knows where your IFAK kits are, it would be better to put in a dedicated pouch.
With using the alien gear holster for duty, does your department run the axon body cams? I hate the safariland holsters but they are the only ones axon maxes their camera sensor for.
Careful with the polyethylene plates cause yes you save on weight but apparently they react to summer heat pretty bad depending on where you are. Basically the heat softened the armor and made the pieces that are pressed together under heat and pressure start to separate which made to where the armor started to deteriorate.
Mojo, I noticed you have some handgun pictures on the wall behind you they would look great on my wall. Where can I buy those pictures. Keep up the fantastic work. Thx.
Hows tuning ur rifle stacking tolerance? If its in spec its good.stacking is when u have a + or - spec , which all parts have cause u cant be perfect. Lets say ur upper race way dia is .002 over and ur bcg dia is .002 over, thats stacking tolerance.
I’ve broken two sets of mars pistol mag carriers just getting in and out of the patrol vehicle. Granted these vehicles are made for dudes that are 5’8” and weigh a buck 65. Loved the angle. Plastic was cheap as shit
Mojo, How did you attach the Safariland ELS fork to the Mars mag holders? The ELS mounting screws are not long enough to secure the mounting fork to the mag holder. Also, can you get away with using the adapt 1 (single molle column mount) from Guardian Warrior or do you need the Adapt 2 (double molle column mount) for better support of the mag holder?
After watching this among other people's duty gear setup's, there's really no need for a circle dot on a optic, unless it's an Eotech or you just prefer it.
how do you find out if your optic will line up with the riser before you actually purchase the riser? I always thought at least from scalarworks that I would just buy at matching height optic riser and Magnifier mount.
Is there a preference between the MAWL vs the RAID? I think you previously had a RAID, but your more recent videos have a MAWL. I think neither is a wrong answer, but curious if you got some wisdom/experience to pass on.
Hey mojo. How old were you when you got onto a SRT/SWAT team? I’m a young guy. Just got out of the mil. Just got into LE. I really want to get onto a SRT team. But I’m afraid nobody is going to take me seriously until I’ve been in police work for way longer. I will get in SRT or I will die trying. But I just wanted to get your thoughts. Thanks.
I know you didn’t ask me but I have some insight, I’m mil and civilian LEO. Some departments require some experience on patrol before you’re eligible to try out. Make sure your department has one as well, in my experience. My department doesn’t have one but you get handpicked to go to a county wide SWAT team.
Centrifuge Training Sling. Centrifuge used to use the Sierratac Sling w/ a hook added to it for stowing, but the Centrifuge 2.0 now has all plastic hardware and I don’t know who makes it.
Mojo can you gives us your input on pistol braces. From your stance as law enforcement, is this something you or your homies would or would not enforce.
darn still struggling with wrong handedness. get well soon grimCMV
Mojo's Solid Snake cosplay is pretty good. Just missing a box. 😂
I use mojos videos to replace my lack of a functioning family structure.
Same
Currently having girl problems. Mojo, garandthumb, admin results vids are making my heart happy.
same
@@jsdima9113 same here bro I feel you
I assure you sir it is the people in your life and not you.
The trex arms lightbar doesn't get enough love. It's on all my rifles as well.
Ryan is looking ripped holy hell
Lot of Sauna
Holy smokes Ryan. You is more beef cake than that Lucas onetake video. Yessah!!
Grim representing Montana Well, Thanks for all your info and sharing your knowledge Mojo.
Mojo you are the man dude. Been following you for a couple years. Keep up the awesome work man
Damn, Ryan got swole
Mojo, you should make a video on the staccato vs glock comparison as duty handguns.
Great video as always, keep up the good work.
It’s nice seeing y’all still rocking the rapid force
FINALLY! someone else that runs an Aimpoint on a Scalarworks with a Unity FTC. I personally run mine with a Comp m5b. Looks so much sexier than the standard unity riser
I've been really surprised by the durability and clarity on the Nightvision network duals.
Can you do a gear review of your patrol setup?
Looking for new ideas to upgrade my current patrol setup
Damn I’m interested in the extra gear that grims on
🤣🤣🤣🤣
Right!
Same
Rad video and info as usual duders. One note, he’s using tegris not carbon fiber. It’s similar in weave but the tegris is malleable compared to brittle carbon fiber.
Fantastic info and helpful, thanks
Can you do a vid on your full duty gear? Appreciate it brotha
Regarding the placement of medical kit,
The cargo pocket idea is great and I'm sure you and your team knows that it is there, this comment is more for the people that may try to copy/paste your idea.
It's a better idea to have your IFAK marked and in an easy to locate/access location.
If you stuff your IFAK in your cargo, and your team isn't very aware that this is where you keep it then it could be bad.
Same goes with spreading your IFAK contents throughout a chest rig. If you aren't a part of a team that trains together regularly and knows where your IFAK kits are, it would be better to put in a dedicated pouch.
Mountain man medical ankle med kit on patrol for the win for me.
I love my shot stop plates 🔥
Very cool thanks for sharing gents
Love that placard grim is rocking. If my eagle pc had the ability to use ghooks or clips of so get it and take my BFG ten speed off.
Can you make an instructional video on alternate shooting positions with both rifle & pistol?
Emphasis on urban/side prone shooting.
Legends.
Mojo talks like he shoots… like the damn Road Runner from the Looney Tunes cartoons XD
I'm just here to say you're a stud Don.
Gut that SF helmet, use 4d pads and boa suspension for ACH and you’ll be so happy
With using the alien gear holster for duty, does your department run the axon body cams? I hate the safariland holsters but they are the only ones axon maxes their camera sensor for.
Bro Grim got fuckin yolked
Careful with the polyethylene plates cause yes you save on weight but apparently they react to summer heat pretty bad depending on where you are. Basically the heat softened the armor and made the pieces that are pressed together under heat and pressure start to separate which made to where the armor started to deteriorate.
Good to know, never knew that
22:32 how tf did you fit the staccato p on the rapid force????? I need that mod 😂😂😂
Grim gettin thicc. 😂
Holy shit I did a EFC class with Ryan didn’t even realize he was a big RUclipsr, super nice guy
“Not gonna tell you what I did to this holster”
My man that’s the only reason I tuned in! 😢
Can you do a video on the carrier you were wearing in the Jan cold start? Dope video per usual
Ryan been on the spinach
Long awaited
Where do you keep cuffs 🤨
I’ll probably watch this about 25 times this year
We need our dose of Cold Start of the Month, sir
Mojo, I noticed you have some handgun pictures on the wall behind you they would look great on my wall. Where can I buy those pictures. Keep up the fantastic work. Thx.
Cool gears 😎
Hows tuning ur rifle stacking tolerance? If its in spec its good.stacking is when u have a + or - spec , which all parts have cause u cant be perfect. Lets say ur upper race way dia is .002 over and ur bcg dia is .002 over, thats stacking tolerance.
I would also like to see your current duty belt setup if you ever had time for that.
I’ve broken two sets of mars pistol mag carriers just getting in and out of the patrol vehicle. Granted these vehicles are made for dudes that are 5’8” and weigh a buck 65. Loved the angle. Plastic was cheap as shit
Dude I'm Mexican and even I don't have a moostash like mojos. I'm jealous
Mojo,
How did you attach the Safariland ELS fork to the Mars mag holders? The ELS mounting screws are not long enough to secure the mounting fork to the mag holder. Also, can you get away with using the adapt 1 (single molle column mount) from Guardian Warrior or do you need the Adapt 2 (double molle column mount) for better support of the mag holder?
Grim got 2 more guns, non concealed
How did you make the staccato work with the rapid force??
After watching this among other people's duty gear setup's, there's really no need for a circle dot on a optic, unless it's an Eotech or you just prefer it.
Can you review the rapid force drop leg swivel!!
how do you find out if your optic will line up with the riser before you actually purchase the riser? I always thought at least from scalarworks that I would just buy at matching height optic riser and Magnifier mount.
Is there a preference between the MAWL vs the RAID? I think you previously had a RAID, but your more recent videos have a MAWL. I think neither is a wrong answer, but curious if you got some wisdom/experience to pass on.
If you don’t recommend it for duty, will you recommend it for range use. Please help.
Anyone know what flashlight helmet mount was on Ryan’s helmet? He had his mic cables in it
Found it. Theslowsco VAMP
What exactly is "stacking tolerance"?
(Flow through) means the baffles inside the can have holes in them.
Anyone know what earpiece mojo is using?
Did you get rid of the SS armor after their debacle
thanks
Did kagworks start making the case for the new iPhones?
How was he able to attach a guardian warrior MICRO onto the bison belt? Wasn't it designed for a 1.75" belt???
🔥
What is the spelling for that velcro retainer Grim is using for his comms leads?
A mil spec trigger cmon dude lol SSA-E!!!!!
My wife says I’m an offshoot clone of Mojo
What sling did you say you are running?
I was trying to find that as well
Centrifuge sling
Yeee
Hey mojo. How old were you when you got onto a SRT/SWAT team?
I’m a young guy. Just got out of the mil. Just got into LE. I really want to get onto a SRT team. But I’m afraid nobody is going to take me seriously until I’ve been in police work for way longer.
I will get in SRT or I will die trying. But I just wanted to get your thoughts. Thanks.
I know you didn’t ask me but I have some insight, I’m mil and civilian LEO. Some departments require some experience on patrol before you’re eligible to try out. Make sure your department has one as well, in my experience. My department doesn’t have one but you get handpicked to go to a county wide SWAT team.
There is a bit of shake within the video. Something up with the censor of your camera?
What’s the sling mojo has?
Centrifuge Sling
Centrifuge Training Sling
Hey Mojo, I ordered a patch a week ago and now the website is broken and I don’t have any updates on my order. Do you know what’s going on?
YOU AINT running a milspec trigger don't lie 😴 I love you mojo
I’ve been looking for a way to mount a rapid force holster to my true north mount, does anyone know how to safely mount it?
Bro, I just ordered some stuff from patch panel and forgot to use the discount code... dang it lol.
The GOATS of the gun community.
Itac? Just looking for more info. Thanks
ATAK- Android Team Awareness Kit for Androids. There’s CivTAK too for civs obviously
Can someone link me to the ITAC stuff hes talking about, I can't find it on google? lol
Just saw the back of the plates. Location was stow ohio. Funny. That's close to me lol
They shouldn’t be illegal anyway.
Let us know where to send you a mic...
bummer how Qore performance went away with QD and went velcro.
Grims lookin alot bigger then before, what GEAR did he ferget to tell us about? Lol
Sir. What kind of sling are you running? You say it so fast I cannot understand what it is. Please, thanks.
Centrifuge Training Sling. Centrifuge used to use the Sierratac Sling w/ a hook added to it for stowing, but the Centrifuge 2.0 now has all plastic hardware and I don’t know who makes it.
Itac or Atac? I couldnt find Itac
can u do an edc video
Yooo
What 3x magnifier is he running he never says he just said it's on a unity mount.
Looks like aimpoint
Yoooooo
anybody know what watch Mojo has on? thx
garmin tactix
@@shaldeman11 thx
Not a knock on Haley, but I can't help but notice literally no one who was running the Thorax last year still is now after the initial review process.
If Bobby Lee became a youtube operator.
Montana will never stop looking like Joe Biden sniffing something =)
Bro you talk so fast 😮
Please get a better mic.
Thanks for the video tho.
Lol when it’s obvious you take steroids as a law enforcement officer. Illegal.
Mojo can you gives us your input on pistol braces. From your stance as law enforcement, is this something you or your homies would or would not enforce.
Mojo! what mags do you use for your duty glock? Looking to get some new ones!