Harley-Davidson Noise from Primary Case, 1 of 4
HTML-код
- Опубликовано: 14 авг 2024
- Primary Bearing and Clutch Hub Replacement in Detail.
1:14 Floorboards
1:52 Primary Cover
2:30 Chain Tensioner
3:06 Clutch
4:24 Compensator
4:54 Removal of Clutch & Compensator
5:17 Shifter
5:54 Starter
6:29 Killing a battery
7:28 Inner Primary Case
7:42 Oil Drain Plug conversation
8:14 Oil Seal
8:22 Retaining Ring for Inner Primary Bearing
9:04 Press Bearing out of Inner Primary Case
10:14 Press in new Bearing
Transmission Mainshaft Inner Bearing Race Puller and Installer
amzn.to/3kRRrER
Bearing tool
amzn.to/35SNRG9
Inspection Camera
amzn.to/2IYFPmE
15 Quart Drain Pan. amzn.to/3qglrND 
Авто/Мото
Matt, your cracking me up man!!! Love seeing the Regular Joe tooling on his bike! Your in great company and cool videos!
I had to buy a new battery.
Q!a aw ayq3+q4qmoo kiki
Well done, Bad Matt! Watching your "mishaps" was great entertainment! Also appreciate all your efforts in presenting this educational and thoroughly enjoyable video!
Best comedy on you tube. Keep it up.
sing an impact wrench on the compensator may disconnect the magnets from the stator opening a whole new can of worms.
Thank is good to know.
Compensator nut should be 150 ft lbs (tighten to 120 ft lbs then back off) and I got tired of it backing off after a while so used like two drops of Red Locktite and problem solved.
And that inner primary bearing race crap can go. I installed a sealed bearing and omg what a difference. And they're only $50.00 (if you get the cheap All Balls Chinese one for $20 thats on you) but quieter, no more leaks and it holds up. Glad i made the change cuz got tired of the oil leak i couldn't ever find.
never use a impact gun on the compensator, it shakes the magnets off the stator housing
You just made my night
Don't usually comment on this kind of stuff but have to on this one. The main shaft race, inner primary and clutch bearings are not even in play when you rotate the back wheel. That sound you indicated was more likely in the final drive system, maybe a bad wheel bearing, or possibly the transmission output main bearing. Or as simple as the belt rubbing on something... K
If you had to replace the main shaft bearing, then the automatic chain tensioner was too tight. Get rid of it, and put in a manually-adjustable tensioner.
I had to do the same on my 2010 Lost my mainshaft the first time and on the second fail the tensioner had to go. My mechanic didn't tell me my chain tensioner broke it till the second go round. Now my compensator sounds like a small ball pean tapping the case.
Same here on my 08 Ultra. Replaced mainshaft bearing and all the seals plus inner primary bearing. Put a baker attitude chain adjuster and and baker compensator in and so far all is good. Did all this a few years ago when I realized it was the automatic chain tensioner doing all this destruction
Sparks and beer ... the only way to work on a Hog! Add some Black Sabbath and you're all good.
Smoke weeds better concentration
Friends?
Can I share this great video? I want to use it for maintenance...Thank you!
What torque specs is that impact. Trying to decide which Milwaukee impact to buy for this job. Mid torque model I’d 650 ft lbs and high torque is like 1000
Hi, I fix same noise, the main shaft bearing. I bought the necessary tool to get out the inner race and a bearing from Baker. A friend get out from primary case with hydraulic press and put the new bearing.
This is in Mallorca, Spain.
The most useful tool is no doubt, a good disassemble and assembly instructions book and the necessary tools.
I had to diagnose the cause before all but I like mechanic and the official HD here is very (very very very,,,,) bad
This is video needs to add update also on what to do when your rear drive belt goes out. Thank you
www.georges-garage.com/product/trans-sprocket-locking-tool/
you have to be an engineer, or something.....smart as a whip! every harley guy, should have you on their block. instead of traveling 5-20 miles to the closest indy/dealer.
I have heard it is not good to use impact gun to remove these bolts
You are correct.
@@badmatt4227 Sure, more broken parts mean more business... the last thing you need is excessive shock treatment on the transmission. Lock the transmission in the top gear, put a broom stick through the rear wheel on the swing arm... Bob's your uncle...
6:30 man, it's a costly lessons
Just drained my primary oil on my 06 sporty and found large metal shavings and a couple teeth. Trying to figure out what it could be before tearing into it.
I am have not opened up a Sportster. But replace all bearings the oil comes in contact.
@@badmatt4227 Thanks Matt. Appreciate it, Sir!
in my 06 sporty, the factory clutch has a steel disc thats riveted together. i broke those rivets and had to replace the clutch. i wouldnt be surprised if you did the same
@@AverageCitizen333 I dont have the stock clutch. Upgraded with the screaming eagle a few years ago. Turns out the shavings came from the flywheel. Before I upgraded to a performance starter, the bike used to do an engine kickback sometimes during starting. My guess is that's when it happened. Not an issue anymore.
Good stuff good stuff 👍👍👍
Can you replace that with a Timkin bearing?? Or has to be the same kind of needle?
I would review Timkin's website. www.timken.com/products/timken-engineered-bearings/
How does using impact on rear starter bolt?
Bad pratice using a impact wrench, big, big, mistake. Will ruin the threads inside the casings
Yeah. A steel bolt with an aluminum case leads to trouble with the power tools on it.
yep. hand tighten is good for me...
You kick ass
Alcohol blood level 10 to 1 when working on my Harleys .
also check main shaft bearing as well they make very loud noises and wear out all other primary parts in addition to cause a catastrophic wheel lock at ridding speeds that can be fatal Harley had my bike 6 times for repair of different accessories from Starters to clutch hub bearings and a few misc, parts not a single one of them ever looked or said anything about the main shaft bearing yet my noise never went away about 8 months later after my used bike warranty was up I decided to pull the primary apart to track down the noise being an experienced Bike mechanic I had a hunch glad I did as soon as I got all the parts free from the tranny the main shaft wobbled like a stick shifter go figure ..............Needless to say that dealer will never see another dime from me ever again!!!! I will fix it my self or take it to a different HD shop
Buddy, unless you are out of touch or simply ignorant, YOU DO NOT USE AN IMPACT TOOL EITHER ON THE COMPENSATOR SPROCKET NUT/BOLT OR THE CLUTCH HUB NUT 1 you will loosen the magnets inside the rotor and 2 you are taking a chance at getting the crankshaft out of round..,
So, instead of wanting to be helpful. You take pompous arrogant douche approach and go straight criticizing others. Which is indicative of a leftist approach to communication.
I hope you don’t have children.
Scroll down and you will see that “Alanmiller366” has already made similar comment.
Try to mimic his style. Skip the childish insults and go straight the information.
@@badmatt4227 WOW... such a nice reply to your viewers...
Service manual says to use impact
Did that give you a bad vibration in the engine?
No, I only noticed after the engines was warm and rotating the back tire. However, if There is vibration. Maybe look at the compensator and/or check the runout on the pinion shaft.
Do you know the clutch bolt reassembly torque spec?
I’m sure you figured it out by now but it’s 90ftlb😎
Put bareing in the freezer first will press in easy
Good Video~~~~
Funny shit
That f'ing music or whatever that noise is
It was a shock. He forgot to disconnect the battery. These things happens from drinking in everyday life.
The sound changes when I upload videos. The next video's I make should sound better.
Sounded like some 70’s porn music to me. Lol
Shameful, lack of professionalism, manual makes it very clear that for any maintenance on the bike the first thing is to remove the main fuse and disconnect the battery. If you didn't burn the module, you were very lucky.
Really? This is real life, with real people. People make mistakes, champ. I think it's cool that he didn't edit that out to keep others (like yourself) from chastising. Lighten up Carlos.
“Lack of professionalism”? It’s a RUclips video, Nancy. Go cry somewhere else.