Это видео недоступно.
Сожалеем об этом.
primary chain adjustment - How To Adjust Primary Chain Tensioner
HTML-код
- Опубликовано: 29 апр 2018
- www.sandiegocus... Motorcycle primary chain adjustment. How To Adjust Primary Chain Tensioner.
Curtis from Wild Steed Worx & Services www.wildsteedw... shows how to correctly adjust your primary chain tension.
Checking your primary chain tension every time you change the primary oil, is an easy to do basic motorcycle maintenance.
Be sure to subscribe to our channel below so you are automatically notified every time we publish a new motorcycle video.
We like to cover lots of California's motorcycle shows, rides and events. Plus, we have some informative "how-to" motorcycle videos and motorcycle rider video interviews.
With the great weather and varied terrain San Diego California has, it is definitely an ideal location for the motorcycle enthusiast.
If you're into custom motorcycles, mark as a favorite, our Custom Motorcycle blog at:
www.sandiegocus...
Also be sure to visit our motorcycles for sale page at:
www.sandiegocus...
View our Motorcycle Parts & Accessories:
www.sandiegocus...
***Subscribe to this San Diego California Custom Chopper RUclips Channel - / pilotjoe7
primary chain adjustment - How To Adjust Primary Chain Tensioner
sandiegocustommotorcycles.info
Tightest spot in the chain for adjustment, not the loosest or most slack. PhD Master Powertrain and Mechanical Engineer. And Honda PRO, and Victory Technician.
This video shows you how to IMPROPERLY adjust a primary chain. Read the comment from PhatboyHD88 who is exactly correct. A primary chain must be tightened at the tightest spot. Same thing with any other chain or belt that has a manual adjuster. Also: The cold vs hot primary chain adjustment is IMPORTANT. A hot chain will have less slack than a cold chain. Yes, that is correct. As your chain cools, the slack increases. Lastly.....Be aware, you will destroy bearings if you tighten your primary chain too tight.
Im sorry my friend you are incorrect this is not the way to properly adjust primary chain,, i am a certified master Harley tech with 30 years experience.. you are supposed to adjust the chain at its “Tightest” point. Every chain has a point in which it is tightest ,, that is where you adjust the chain, you do this so you don’t over tighten the chain and it pulls on the other components such as bearings both on the engine and transmission when it is at its tightest point... those are the facts that is the correct way to do it and has been that way for decades...
Agreed. As a former motorcycle mechanic apprentice, adjusting the chain at the tightest spot is the way I was shown. This goes for any chain or belt with a manual adjuster. A chain gets tighter as it heats up and you'll trash bearings, bushings, your chain or belt if you tension it too tight when its cold.
@PhatboyHD88. What do you think about adding a HD or SO Hotbike auto tensioner to a stock TC88 Softail Engine?
I don't know if you're aware of this... Since you're an awesome mechanic, but you have to find the tightest spot with the chain for the adjustment not the loosest!!!!!!!
Very well explained and demonstrated. Thank you.
Glad it was helpful!
Damn Kurtis! That looks like a super accurate way way to check that tension!🙄. You’re a real professional ain’t you!😂
Thank's a lot.. Greetings from Italy !
Our pleasure!
i understand what you are doing here, but how about when the primary cover is on & your adjusting the chain thru the inspection plate? i've done this a few times & the problem comes with the notched plate. with my '02 Electra glide it seems the notches are too far apart for a perfect adjustment.
Yes I agree you have to find the happy medium
Thanks for an EZ to understand and do basic maintenance.
seo7111 you are kidding,right!!!!
Good questions Bob. Thanks
Thanks guys!
i have just put a new primary chain into my 2003 duece and for some reason i don't have alot of adjustment at the beginning of the 3 rotations,any help?
Rick Oshay
YEAH ! GO BACK TO SELLING SHOES
Wrong! The bike should be in neutral. With the bike in gear it depends which way you roll the engine as to which side of the chain is slack. You rolled the engine both ways.... Also, you set your adjustment at the tightest spot. Do you even own a Harley manual?
Adjusting the Primary Chain Tension looks easy enough, ty, but when you're measuring for the chain up tension and down tension are you measuring from the same part of the chain... ie; from the top of the chain....
26 is what we'll torque the adjustment nut correct..??
You say its easier to do this procedure with the primary cover off... I'm sure it is, but what do you torque those bolts to and should I replace the gasket each time....
I need a GOOD manual...
I have an '03 Chopper 107 Rattler.... is this procedure ok to do on this bike.... I haven't gotten into it yet so idk....
I will use 20/50 dinosaur primary oil....
Thanks
kinda makes you wonder why they didn't use a similar design on the tensioners on the twin cam motor. Stupid but boy what a money maker for Harley Service departments.
Very true
Hey guyz this video helped me so much and I'm so great full....🙏🏾🇲🇿🙏🏾 so i kindly ask some one to put all those numbers in centimeters please as I do not know how to read them and also I can't converte by my self ......a little help please
When you go on the internet to ask people for information. LOL
So after I find the right tightness by turning the wheel, I just torque it to 25ftlbs. But if the teeth do not allow the adjuster to move, what difference does it make?
you have to back off the 9/16 nut, enough..to make the teeth seperate, so the the adjuster can move mo!!!!!!!!!
This whole setup is garbage to start with. You have a nylon brick tensioner holding a chain whipping buy it about 20,000 feet per second and you all can't understand why it wears out so badly all the time. So many better options available.
is another example of factory design flaw..... I know of one motor, they mounted the tensioner on top of the case. .... seems to work just fine and dandy.........
thank you very much that helped me a lot
Some people think they know what they are doing. Hmmpph.
I replaced my stator. Now my Sportster will only go into 1st, neutral and second gear. What is wrong ?
what year sporty do you have.? is it a 4 or 5 speed?
Before talk about people who think know what they are doing, perhap's must You to learn how to adjudt a chain (primary or not, H-D or not, on earth or on any other planet...).
thanks for correct info, nice to here from someone who knowns his shit
ROY bean so you know i am a master certified harley tech and he is completely wrong , you must find the tightest spot on the chain not the lose spot .. read my above post where i explain
@@PhatboyHD88 is correct in saying to adjust your primary chain at the tightest spot!! Adjusting your chain too tight is going to lead to some costly bearing replacements......
It appears big dog is a harley davidson type engine/motor. But what i do not get is why are these motors here in 2017/2018 still using a chain drive primary? A chain drive is some of the oldest motorcycle tech to date because everyone has converted over to the gear drive. smh
Frank you're everywhere I am... Too funny am I correct that you have to find the tightest part of the chain?? for the adjustment? he's doing the loosest help me out here Frank
Wrong!
That's WHAT PRIMARY CHAIN INSPECTION COVER IS FOR ! NO NEED to TAKE OUTER PRIMARY OFF ! WASTED TIME
There is no inspection cover on an M8!
Maybe they took the cover all the way off to show us novices the whole picture? Not sure, but it is nice to see the whole thing.
My twin cam 2010 FLH has no inspection cover either
Damn Kurtis! That looks like a super accurate way way to check that tension!🙄. You’re a real professional ain’t you!😂