Stirling Engines aren't useless by any means. The Swedish Navy uses Stirling Engine technology to power its' 'Gotland' Class Submarines, which were able to absolutely confound the entire US Navy in 2005 during a joint naval excercise. HSNS 'Gotland' (which was built for the bargain-basement price of $100 million, roughly the price of one F-35 fighter) was able to get through the entire US Task Force and 'torpedo'' the supercarrier USS 'Ronald Reagan' no less than 5 times, and then escape undetected. AIP powered subs can operate submerged for up to 3 weeks at a time, far longer than conventional diesel-electric subs, and leave no radioactive trace in their wake, which countries such as China and Russia are able to detect. AIP powered submarines may very well be the attack subs of the future thanks to Stirling Engines.
Could that power a propellor for an rc boat? I wouldnt want to be going very fast but I want to know because I'm trying to build a small balsa wood ship with a rc rutter and a running propellor
I wonder if you could replace the glass tube piece with a metal one to make it last 25 times longer and even make it faster. I also wonder if it's possible to make this powerful enough to charge a phone
Can anyone help me find replacement tubes like those? I have a mini sterling engine but it’s from another model, but I can’t find replacement glass tubes that are above the candle. I need 12mm by roughly 4cm.
What if instead of running a flywheel, it would have cylinders at both ends in single shaft wrapped in coil and magnets, similar in fashion to those linear generators/ free piston generators done with internal combustion. I think it could raise the efficiency rate of stirling generator also as it puts more mechanical work to actual power generation?
Marcajo hobby you have to heat it up super hot. Make sure the pistons fully extend without hitting. I did this and still very slow. The wheels wobble. It was badly made.
You have to make sure the two pistons are 90 degrees out of phase, a 90 degree angle difference between the two points where the two pistons connect to the flywheel.
Can someone tell me why my motor runs a few minutes then stalls and wont run again untill it cools and i have to remove the pistons and re compress air into it for it to work the few minutes. The displacer pistons are right above the power pistons and the piston is a long glass tube i dont see how the air can move between the 2 cylinders because the power piston is so long.
How hot is it in your room? Because if there is not much air temp difference then it wont work and that's why you need to let it cool down. I think that's why
thanks for posting. here are some late thoughts. it should be understood that this little gama stirling engine is not perfect. but it is BETTER (more efficient) than many. why is this true. the Mass of Each reciprocating component, save the displacer, is as LOW as Practical. ( if a two-piston configuration were used, instead, the mass of the second piston would, probably, be Less-than that of this displacer.) this engine is Correctly configured, for use of a displacer. the mass of the cold piston has been kept LOW; and it has no dead-space. the use of a slightly, elongated duct allows the use of a shape (an 'upwards', convection loop ) that is OPTIMAL for Limiting movement of heat, to the cold side. there is a significant physical separation/isolation, of the hot and cold sides. see my tutorials, if you are interested why these features are worthy of note. i can only hope the glass displacer cylinder will last, a while. cheers googletranslate
It's a function of temperature difference. Think of it as similar to the action of hot air rising. Putting ice on the cold side even makes the engine speed up!
Got screwed on a FB add. Advertising a better one and they sent this. Still works so happy about that but some Chinese company screwed me and basically said too bad. I ended up bending the arms a little and it ran better
Coke and strippers!!!!!! You love to say it........I like to hear it....because it's just innocent old Cola and wire strippers....but the old people are already gasping!!!!
Hello Hacktubers,I hope you like this gadget?
I need this engine
Pakistan
@@عشقِحسینع why?
m.ruclips.net/video/2UTeH9J2b80/видео.html
@@عشقِحسینع m.ruclips.net/video/2UTeH9J2b80/видео.html
Stirling Engines aren't useless by any means. The Swedish Navy uses Stirling Engine technology to power its' 'Gotland' Class Submarines, which were able to absolutely confound the entire US Navy in 2005 during a joint naval excercise. HSNS 'Gotland' (which was built for the bargain-basement price of $100 million, roughly the price of one F-35 fighter) was able to get through the entire US Task Force and 'torpedo'' the supercarrier USS 'Ronald Reagan' no less than 5 times, and then escape undetected. AIP powered subs can operate submerged for up to 3 weeks at a time, far longer than conventional diesel-electric subs, and leave no radioactive trace in their wake, which countries such as China and Russia are able to detect. AIP powered submarines may very well be the attack subs of the future thanks to Stirling Engines.
Oh 👌 well thanks for information
Holy crap
Really cool sterling for a very affordable price. I will have to pick up one to go with my other useless gadgets.
Useless? Yes.
Relly cool? Also yes
Add a Generator at the end then add gears then there we are ELECTRICITY!
@@yeetusdeletus650 A small geared alternator would be perfect for a miniature light.
It has one
@@zalad5320 Useless? No. Really cool? Yes.
I think Ima get this as a desk toy just something to look at stuff like this amazes me and I think it's cool
Cooool this is an interesting desk toy type thing :)
This type of engine got a huge potential IMO
almost as if they used it in the 1800s
Imagine a scientist at the early 19th century watches this video. He'd be thrilled.
I seen these in eBay and had to look them up on here. Not $20 anymore but still worth what they are asking
I got this as a christmas gift and i could not figure out that crappy chinese manual so thanks man
This is Great video 😂👍♥️ i Like it 👌
Jokes on you, I get to make one in college for the low low price of 22k 😎
Could that power a propellor for an rc boat? I wouldnt want to be going very fast but I want to know because I'm trying to build a small balsa wood ship with a rc rutter and a running propellor
Yeah
Just modify it
And by the way it also has a electric generator wich looks like a motor beside the wheel
Nice job. Still working on mine
A small candle would be as good or less than alcohol, or so I think.
I wonder if you could replace the glass tube piece with a metal one to make it last 25 times longer and even make it faster. I also wonder if it's possible to make this powerful enough to charge a phone
no all stirlings rely on glass also no phone charging, leave that to model steam engined, they produce more power faster.
এটা কৈয় পাওয়া জাবে
It's Methanol in the oil lamp?
Hello i have a question, could I use a tea light instead of the alcohol lamp?
Yes
yes, it would fog up the glass with black fumes tho
Do you need to buy the lighter fluid separately
Can anyone help me find replacement tubes like those? I have a mini sterling engine but it’s from another model, but I can’t find replacement glass tubes that are above the candle. I need 12mm by roughly 4cm.
maybe buy some steel tubes?better durability?
@@lovega072 can't see the pistons through steel
What if instead of running a flywheel, it would have cylinders at both ends in single shaft wrapped in coil and magnets, similar in fashion to those linear generators/ free piston generators done with internal combustion. I think it could raise the efficiency rate of stirling generator also as it puts more mechanical work to actual power generation?
The thermoacoustic engine is perfect for that use.
won't work without the flywheel
@@rockwithyou2006 How come, as those generators themselves would create resistance?
@@normoloid We need something that has inertia in order to create momemtum. I wonder if the generators alone will be able to do that ?
how to use it to light a bulb?
Amazing kit hacktuber and one question bro if continuous flame the glass tube is broken or not??
In kit are include 3 tubes,prob they crack after a while
It available striling engine or price
I got a cool-looking stirling engine from Taolei, but it’s not as applicable as this one and it took a lot of tweaking to get working.
Thanks for the video a cool little engine!!😎🐓🐓🇬🇧
What alcohol did you use?
98% alchohol
can i have the name of that "98% alcohol" you're talking to?
how does it work please explain it principal
Thanks sir
I have the same but mine doesn't work....can you help me?
Have the same pb!
Marcajo hobby you have to heat it up super hot. Make sure the pistons fully extend without hitting. I did this and still very slow. The wheels wobble. It was badly made.
You have to make sure the two pistons are 90 degrees out of phase, a 90 degree angle difference between the two points where the two pistons connect to the flywheel.
Where is the fuel source to continue thise engine....
95% alcohol I think
if I put other thing than alcohol its works?
just put a normal candle and it work
Any heat source will work
Can someone tell me why my motor runs a few minutes then stalls and wont run again untill it cools and i have to remove the pistons and re compress air into it for it to work the few minutes. The displacer pistons are right above the power pistons and the piston is a long glass tube i dont see how the air can move between the 2 cylinders because the power piston is so long.
How hot is it in your room? Because if there is not much air temp difference then it wont work and that's why you need to let it cool down. I think that's why
Good music choice.
Sir es modal ka saman kaha se liya h plz sir abhi btado
thanks for posting. here are some late thoughts. it should be understood that this little gama stirling engine is not perfect. but it is BETTER (more efficient) than many. why is this true. the Mass of Each reciprocating component, save the displacer, is as LOW as Practical. ( if a two-piston configuration were used, instead, the mass of the second piston would, probably, be Less-than that of this displacer.) this engine is Correctly configured, for use of a displacer. the mass of the cold piston has been kept LOW; and it has no dead-space. the use of a slightly, elongated duct allows the use of a shape (an 'upwards', convection loop ) that is OPTIMAL for Limiting movement of heat, to the cold side. there is a significant physical separation/isolation, of the hot and cold sides. see my tutorials, if you are interested why these features are worthy of note. i can only hope the glass displacer cylinder will last, a while. cheers googletranslate
Where can we get the chemical
Its 100% alcohol,from pharmacy
is this same principle they used in car engine?
This Stirling engine isn't an internal combustion engine. So, no. In car engines, combustion happens inside the cylinder.
nope
Stirling engines are used in trains and ships
Good video bro keep it up🖒🖒🖒🖒🖒
HI ASSALAM O ALAIKUM I WANT TO PURCHASE THIS ENGINE KIT
Any place to get cheap parts? Apon starting the glass broke 2 separate glasses
Mine doesn run, with propane torch vor candle it wont run
Hame bhi chahiye kaise aur kaha se milega
Check aliexpress under stirling engine kit
Excellent
Help me please! I've bought the exact same engine kit but it just won't start...
Same..
I got mine to work for about 30 second
Sir me polytechnic KR RHA hu muje modal bnana h plz bta do
Will a candle work for this?
I tryed a candle with one wich in it and that didn't work i tryed a 3 wiched candle and that worked
Yes but the glass tube will turn black
geweldig hij werkt 100%
Anyone explain to me how did it work?
It's a function of temperature difference. Think of it as similar to the action of hot air rising. Putting ice on the cold side even makes the engine speed up!
HOW to perches
is it alpha type stirling engine?
Hayır değil
Got screwed on a FB add. Advertising a better one and they sent this. Still works so happy about that but some Chinese company screwed me and basically said too bad. I ended up bending the arms a little and it ran better
i think there is an dc motor which the flywheels or the webs connected on whatever you call them. you can generate dc voltage with it.
prnt.sc/pg4mri
...via a rectifier
Great toys for kids but the fire is a bit dangerous
In case you didn’t realize it you can hook a small led bulb to the generator
How?
सर इसका रेट क्या होगा
Como comprar um igual?
What the point of it?
Stick a fortnite kid who had just lost and this thing is doing 500hp but the salt can make it rusty so be careful
50$ is suficiently to buy a 125cc or 150cc gas motor
Robert Stirling wasn't a physicist, he was a minister of the Church of Scotland.
Mine the glass tube keeps breaking.
from the heat or because you drop it?
İt is supposed to happen.
Wow very cool. İ wish i had one.
Your dollar sign is on the wrong side of the 20....
Sir how much does the engine cost
Je l'ai mais ça ne fonctionne pas
Did anyone see hidden dc motor??
Where is steam and water
great
Does anyone actually use this for power
I power a Edison bulb but ig is a bit loud
attach a crank phone charger to this attached to a battery, boom, mini generator
Nice.
Got the same one for 14 lol, 6 pound profit
£14 is $20 comic
Video super
Thanks and regards
شكرا جزيلا
price strilling
How to buy this engine
Coke and strippers!!!!!! You love to say it........I like to hear it....because it's just innocent old Cola and wire strippers....but the old people are already gasping!!!!
*they had us in the first half, not gonna lie*
I would not recommend these cheap stirling engines the glass is cheap and cracks constantly
And yes, I didn't over tighten them
Mine worked great.
I bought one, lit the burner, it never ran, even with a blow torch. After a while the cylinder shattered.
@@resinanzz3100 yes i spun it
Oh no shipping to the US. 🤨
You are lucky
@@integrationofmanandmachine4714 wtf
i brought one it's not working i feel so bad
İ would have helped
isto serve para que
No caso se colocar óleo vegetal
It would work bug would smell like burnt oil and harder to light it
$54 australia price
no its 30 on ebay
berapa harganya
Hey !! Don't spend your money . You can do same for only 4 $ I did lol
Cool video, but GOD that music is annoying!!
any body want to see that engine blow up with a map gas torch no? just me? ok
Type "Gamma"!
Yeah, true.
I am from Pakistan and I need this stirling engine please
One Joji engine plssssssss.
YESSS
wow
be co to see a sterling tattoo machine.
Wow
Cool but I don't want to see you assembly. I want to see you build piece by piece then assembly it.
I bought this machine, mounted it exactly as instructed, but never worked. He never started.
sana ol mugana
ruclips.net/video/HaTDt5GonQk/видео.html - olha a invenção desse genio também.
Hola alguien que habla español?
shyguy yo merenges
Can you give away this .?
How about making a Stirling kit engine that actually does something useful? Enough with the toys already!!