FINDING WISDOM IN A WALNUT BUILT IN
HTML-код
- Опубликовано: 9 фев 2025
- It's another day at the cabinet shop. Today I compete the walnut office. I talk a bit about my plans for this channel and even issue a challenge to you, the viewer! Special guest @KeithJohnsonCustomWoodworking introduces me to a new tool.
.
THANKS FOR WATCHING!
.
PLEASE LIKE AND SUBSCRIBE :)
.
www.cabinetwiseshop.com
.
find me on instagram at : cabinet_wise
I watched you “ In The Beginning “ then you were lost 😞 , today I found you again 🎉 . You are a wonderful talent and have a great sense of humorous . I wished more of the ones who have made it would also find you , you truly deserve a hand up.
I’m interested in learning how you made the decorative section of the doors.
Yes! Please do! I’m interested in that as well!
Richard, your attitude will take you far. I greatly enjoyed and learned from your earlier videos when you were doing them. You are miles ahead of me, I have done it part time for a couple years now. Your way is not wrong, it was perfect for its intended purpose, and now it is evolving as you and your vision change. I’m watching out of order, I hope some detail on those awesome doors is in the other! Looking forward to your lamello videos too, I know the tool would help me, but alas, budget requires other things first! Keep up the good work, and great to see your beautiful wife supporting you in your journey.
Perfect for its intended purposes , very well said .thats so much for the support it means a lot . Really grateful to hear that . Yes budget haha. I actually was going to buy this months ago but had to wait till I had some extra money. Yes she’s amazing .
Just came across a few of your videos yesterday ( subscribed!) Love it! All of them were 3 years old , then i found the new ones, I thought i missed a few years LOL! I m very similar to you, always open for new ideas. Good Luck! Your channel will do great.
Great videos. Keep them coming !
The Lamello is an absikute game changer and I'm not one who uses that phrase often.... and Keith Johnson is one of the most talented and nicest guys I've had thr pleasure to meet.
Most definitely!! To both
This office desk is absolutely beautiful.
Just subscribed, buddy. As a cabinet/fine furniture maker, who runs my own business, i want to extend my appreciation for you taking the time to document and post your labor. I've thought about doing it myself, but I'd much rather just spend my time watching it than making the content! 🤣🤣. Beautiful work. I'll watch for questions you may ask, and post my input, as well as send questions your way if i get any.
Awesome! Thank you .. yes I will carry the torch🤣 it’s definitely more work making these vids than I could have imagined but now I’ve thrown myself into it and there’s no turning back
I really like the cabinetry! Especially the intersecting curves on the upper doors. Would really like to see how you did that.
You are great cabinet maker!!! Keep showing how you create, that is what brings me back.
Appreciate that !
Very beautiful and precise! I just found your channel and I wish you could share some videos on how you make the beautiful insets and inlays on the door. Appreciate it.
Thank you
So glad you are back! I really appreciate your honest dialogue vs the rehearsed spiel I see on other channels. I have only found a few channels (yours included) that feel like genuine cabinet builders. I guess the difference is the motivation of the video. You come across as someone who really wants to share information in both directions vs the 2-week-old expert trying to get clicks. I have mostly built cabinets for myself, but I am seriously considering doing this for others. I am in the Midwest so regionally there are significant differences in costs and pricing, but talking about the business side of things is always interesting to me. Looking forward to more of your content!
Wow thank you for the kind words . I can only be me and offer a real perspective on how I operate. Yes it’s the real deal . A simple shop but I’ve been in the trade a long time . Since 2004 full time. . You should do that ! Yes definitely true about cost differences in different parts of the country. More to come !
Hi Richard! Just came across your channel, Love it ….. your work is Beautiful!!!!! I have say I do enjoy your thoughts and commentary. The office desk and cabinet are stunning….Well done Sir😊 look forward to seeing past videos so I can catch up to your current work. Wishing you nothing but the best in your Endeavor’s. Can’t wait to see this Channel grow. Cheers!
Thanks so much ! Very encouraging to hear . Really appreciate that
No way!!!! Was not expecting to see Keith. What a sweet cameo! 👊🏻
Haha he had a great suggestion that will no doubt improve my product !
Excited to follow along. Glad to have found you. Love Keiths channel!
Thanks so much , yes me too! So much to absorb from the people who get all the little details right
An honest, humble and very talented individual. I like the way you invite the audience into your shop, and look for advice from others. I have no doubt your channel will grow!
Oh yeah........ Dominii running before changing settings 👊
Thank you , appreciate that . This is the hope ; I figured there are enough super talented people showcasing their skills . Maybe this will be a little more relatable haha . Plus as I get better those who gave me helpful tips will know they played a part in that.
Yes , I did hear that from a few others , definitely won’t do that again 😅
Great work!
Thank you !
Great looking build man! Loving the ideas for your channel. Keep it up 👍
Thanks ! Glad to hear it ; more to come .
I really like your work and think you're great at narrating your videos. I'd like to see a video or short on end panels. I've seen different approaches, it would be great to get your take.
Thanks I really appreciate the support . Glad you find some value in it . Ok that’s a good idea . Will add that to the list !
@@cabinetwise Related question & potential video topic is more on cabinet vs furniture. Seems the same to be as an amateur hobbyist. If I want to build a dresser for my newborn, is that a cabinet or furniture? If different, in what ways and what are tradeoffs? Anyways, thanks for listening .
Just concerning social media views - So I am an avid woodworker and have been doing it for ten years. I, generally speaking, learn nothing technique wise at this point from watching others (not that I am not a lifelong learner or presume to know everything, I have just seen a lot). I still love watching videos. Particularly the ones that are narrated. I like cremona, blacktail studios, tww, keith johnson etc etc. i like the format of your videos. I notice through the comments huge amounts of people who are probably much like me, we like to watch people achieve things. Its like when someone drops a comment in some random video “i never knew I need to watch a person clean a rug for 30 minutes”. Or make custom shoes. I find your formatting to be on point and I enjoy your narration. I am confident your channel will grow if you continue to invest your time into making content.
Also your fingers are precious use a push block or stick at the jointer
This is such a perfect comment ! Exactly what I was hoping to hear . Glad I’m not crazy and my hunch is pointing me in the right direction . Thank you
Will do ! I admit I get too comfortable
I have a very similar business to yours and getting a CNC router drastically changed my life for the better. It seems to me that it's the software that makes the CNC a good tool, and I use Mozaik to design everything. Super easy and intuitive to use, and it exports directly to whatever brand CNC you buy. Also no point in getting a CNC unless it has a tool changer (ATC).
Good to know . That’s definitely towards the bottom of my list . To be honest I’m an idiot when it comes to computers so all the software on one of those is intimidating, but who knows I may eventually try it .. especially hearing that it changed your life for the better .
Really like your jig for mounting hinge plates. Do you mind sharing what brand hinges and plates you use?
Thanks , works well for quick accurate placement. I have a video posted recently called “flush inset fun with Blum” where I talk all about the hinges and plates I use . . Short answer, Blum
Nice work mate. A couple of suggestions though - you've got a Festool dust collector so hook it up to the sanders and you won't be covered in so much dust and crap. Second, I think you should wear safety glasses around the machine you use to bore the holes for the hinges on the door. There's a lot a crap coming out of the bits and you you wouldn't want to get something in your eye. Keep up the good work and especially the navel gazing as that's how we develop as a person.
Thanks appreciate the support and the tips ! Ha , yes maybe a little too contemplative but I agree honest reflection equals growth!
Beutifull work, my only gripe would be the blocks behind the hinges, were you not hable to build or get the correct overlay for these so you didnt have to do that?
In hindsight I should have flushed the walls out and that would have avoided the need for those . I do agree
May I suggest you look in the hinge manufacturers catalogue they sell a hinge backing plate to bring the hinge forward which would achieve a neater look without having to flush the walls out.
Yes I will do that. This is a great example of someone pointing out something to me that , while it may seem obvious, I didn’t do because I was trained a certain way and just kept doing it . This is a good suggestion that can easily be changed .
Nice job! It must be a treat to have a market that customers can afford projects like this. Are those Cal Door doors? Do you know if they outsource that type of glass door? I know they outsource their curved doors.
Yes I definitely am where I am for that exact reason even though overhead is higher than most other places it’s worth it ! Yes from cal door . Yes they outsource the curved doors but not the curved mullions They make these ones in house . I have too much going on right now to have time to make these but I think it would be neat to show a video in the future of me making these since I can do it . For me it just takes too long . More than I have right now .
How did you make those glass doors?
Just came upon ur channel. Good stuff. I was wondering how do you finish the walnut?
Thanks , This got a clear conversion varnish
Great Job! With you focusing on cabinet type work I would make a list of needed capital equipment and their priority. This will keep one focused with limited capital while increasing types, quanity, and quality before continued growth makes adding workers a necessity. In that vein from my very limited perspective my next large aquisition ( my advice is always based on what I would do never what others should do) would be a rip saw and then a panel saw or a sliding table saw if space and capital allows. These machines will increase your thru-put/productivity while enhancing initial quality w/o needing as much hand finishing to get space frames and panels for doors to align and fit. Good luck. Ray Stormont
I just screen shot this , really appreciate all your thoughts! Yes others have suggested a rip saw and sliding table saw , would be super useful. Definitely on my list. I like your idea of having separate lists and order of priority
It seems you may have a little glue on your assembly table. Love the videos
Just a little 😂
Yay yay yay....yay
I believe you should only change your domino setting while running the machine....
U are correct ! I think I met a guy who didn’t ?
I keep using this wrong 🤣 ok next time . I appreciate this it’s the exact feedback I need .
It would be awesome to see it after the finish is applied. Maybe you can post an update?
Yes I can definitely do that
I would like to see how you made the glass doors
These are from my vendor cal door so I didn’t make those the focus this vid as I’m limited for time . But I will do a vid making these in the future since I now see there is interest in that.
The Lamello is a nifty tool, but if you've already got both the Domino and a facility for pocket screws, and perhaps most importantly a tool most of us will only ever dream of-a Ritter-style assembly table-then it seems to me that the Lamello doesn't offer any features sufficient to justify its steep price. And, while I try not to be doctrinaire, at least reflexively, there's something about plastic gadgets as joinery that doesn't sit quite right with me.
In your case, as you're already gluing and clamping the face frames to the carcases, and if you can afford to leave the clamps in place for the thirty minutes it takes the glue to set enough, then you could easily omit the brads. There's nothing wrong with using the brads, of course, but when you can skip a step-or three steps, more accurately, if we count the filling and sanding-so much the better.
To that end, when you perform a final dry fit and determine the alignment of face frame to carcase, you can mark them in the locations where you will use the Domino to cut matching mortises in the backs of the face frames and in the carcase edges. I don't know about you, but on my cabinets the amount of face-frame overhang can become absolutely critical, and it's something I'd rather not worry about during assembly, when the face frame is liable to slide around and as the glue quickly begins to dry. The Dominos ensure that the frames register on the carcases exactly where you want them, minus perhaps some very minor tapping, since you'll cut the mortises on the Domino's slightly-oversized setting to allow for that very fine adjustment.
Alternatively, where the pocket holes will be hidden (which is most of the time) you can use pocket screws in place of either the Dominos or clamps, or both. During the dry fit, frame-to-carcase alignment is achieved by drilling of the pocket holes with the face frame clamped in place. Then, during assembly, you can choose to use clamps or not-the pocket screws perform their function as they draw the face frame tight against the carcase edge. When I've used this construction method, I drive a few screws deep enough to establish frame alignment, and then I like to use at least a few clamps so there can be no doubt that the frame is tight as possible to the carcase edge before I drive home all the screws. You can then remove the clamps, which makes this method good for people who don't always have more than enough of them but who want to be able to move on to assembling the next frame and carcase.
Still, I suppose if you're a professional, and you have to do a lot of on-site work or if the Lamello's unique and versatile features allow you to significantly speed up production and to execute designs that were previously inaccessible to you, then the price is as nothing. It will pay for itself. Otherwise, however, I can't see it as anything other than a toy for the well-heeled hobbyist.
You're already a very fine craftsman; be in no doubt about that. I really like your hinge-pad-locating jig, and the 90° drill-driver is a great idea there. The 1/2" cabinet backs are a classy touch. And the way you describe life as a constant panic really, really resonated with me.
My only point of criticism-and I know that design is often out of your hands-is the frame-and-panel format of the office drawer fronts. I generally dislike the frame-and-panel conceit on drawer fronts anyway-unlike a door, which can actually be constructed as a frame and panel, on drawers it seems a kind of fib. But, aside from that admittedly personal principle, the space described by those drawer fronts seems too small to contain so much frame, including a fairly wide moulding, and so little panel field. But the proportions throughout the breakfront are extremely pleasing.
Thanks for your very thoughtful and thorough comment ! I do agree with what you say about the lamello and the fact that I already have the domino and pocket screws. However I do desire to try it out and I figure at the end of the day it makes for content to show different methods . I’m sure when all the dust settles I’ll have some kind of good use for it in the business. Maybe it won’t be what I think now and maybe it will. Yeah as for the drawer fronts , the size is precisely why we didn’t want to add handles . It was tricky bc we wanted the knee space a certain size while fitting these drawers and we wanted to match the wainscot paneling with the applied molding detail . I think it’s one of those things that will make more since once it’s in the room where it’s made to go.
@@cabinetwise The thing about that Lamello is that it has potential uses that haven't even been imagined yet. That and, as you say, you'll get some content out of it, and if the videos get enough views it'll pay for itself.
I see you building the inset doors. Have you made any cabinets with beaded face frames? Putting those together is the main reason I so badly wanted an assembly table like you have.
*Edit lol: I just found your video about the inset bead. I see you run and rip the bead and tack it in place; I cut it directly onto the frame members and notch for the miters. But when I run bead as standalone moulding, I do it the same way you do, the only difference being that narrow cuts on the table saw give me the willies, so I rip on the bandsaw, and the planer pass eliminates the saw marks.
Aha I see yeah that’s another way. Ha , glad you found that vid . That was made a while back . Yes exactly I’m just excited to figure out all kinds of useful applications for different tools .
Those upper doors really are attention grabbers. Would like to see the construction steps of those. Looking good! 👍
Agreed ! These are from my local vendor cal door but now that I’m seeing there’s interest in them I will do a vid making them . Just was limited for time this go around
@@cabinetwise That would be awesome, thanks! Again, great companion piece for that amazing desk.
Definitely will I’m very eager to know what people want to see as I’m still figuring this all out . And thanks much appreciate
Why not use Biscuits on face frames cheaper than Lamello.
This is true , mostly out of curiosity. I use both methods
Hey buddy as a finish carpenter sometime cabinet maker? I think pocket holes and brads are fine! I hv every tool known to man but not that ! It’s really overpriced Biscuit joiner ?
Glad you agree !
the lamello? Well possibly I’m not sure yet but I will be making that determination in the very near future
@@cabinetwise you may need it as a production cabinet shop? Plus going toward high builds? Looking forward to seeing if you do !
Yes and yes !
There are always different ways of doing things. I sometimes slip a carcass behind the faceframe instead of joining them and sometimes pocket hole face frames on when it won’t show. Whatever works is the right way including glue and clamping face frames on. Great job!🤙🏼
That’s so true , there’s often times a better method based on the build and situation, thanks !
If you sick to your learning concept, I think your channel will do well. Most of the RUclipsrs turn away and the channels become boring.
Really glad to hear this thank you ! I have a gut feeling that says the same