Thanks for this video man I put the upgraded 2085x servo in my xmaxx and it was trying to turn way too far and totally use up all the travel on the servo saver after the wheels stopped turning everyone told me I couldn't set end points on it even RC Sparks told me I couldn't it was impossible. Well I just did it with this vidoes help! Now no more strain on my new servo👍👍👍
For those who tried this and it doesn't work, like it works on the left for example and not the right, it is because you can't do this when the servo is reversed like it was on my Rustler VXL, just set it to default and it will work for sure. Cheers :)
Huge luv bro. Thanks man. I have a VXL 2 wd slash ' I put the badlands on her with renegade wheels and the front was hitting the suspension arms sooo bad it would not work. This fix did her up good. Now all is 100%. 👊😎 Thanks bro.
Thanks for this bro, really helpful. Bought a rustler vxl 4x4 and the servo wasn’t set right so when turning the steering arm was pushing against the main driveshaft lol
Are parts easily available for the thunder drift? I can't seem to find much info of it. I don't want to spend the cash and not even be able to find a replacement belt
Try again. I messed up 1st time too. Savox coreless $80 servos are so much stronger than the blue 40 dollar ones. I ran it all summer without setting end points. It should last forever now. The 40$ blue saxox servo lasted about 10 runs (a week) without setting end points on a 2wd stampede. This one over 100 runs last summer and still rockin. I got the high torque savox coreless digital servo fast as can be. I can only imagine the high speed one
@@familyman8644 tried 8 times. I press the set button and it slams the servo to that side all the way. I've repeated the process several times. No luck.
@@familyman8644 I didn't. I held it back from full about 20% and the second I press "set" the wheels shoot all the way full turned with my finders still holding the wheel. Something ain't right. But its almost not a traxxas servo. Metal gear super speed for racing servo
Yea....well the 2nd I hot the set bottom where I want the steering to stop, it tosses the wheels fully turned to thst side and then it only turns 1/3 of the way the other direction. Doesn't work for me...
@@skaaads no sir. I gave up.... did find out that you're able to adjust the steering endpoints from the Traxxas App instead of having to mess with the programming. Hope that helps
@@skaaads if you didn't get the transmitter with the Bluetooth module I would suggest spending the extra thirty bucks to get the app you can adjust everything from throttle, braking,ends points, etc from the app.
@@jcallesano well yesterday i bought a new servo because my original broke and also bought a new transmitter with display, people from my area told me most beginner transmitter are better than the traxxas one anyways, so yea, but thanks for the advice!
Thanks for this video man I put the upgraded 2085x servo in my xmaxx and it was trying to turn way too far and totally use up all the travel on the servo saver after the wheels stopped turning everyone told me I couldn't set end points on it even RC Sparks told me I couldn't it was impossible. Well I just did it with this vidoes help! Now no more strain on my new servo👍👍👍
Great video you saved me from reading the manual....I greatly appreciate it 💯 I have a fresh Xmaxx Ultimate that is ready to go now...👍👍
thanks I burned threw 2 2075 servo's before I found this video to save the day. thanks for taking the time to make it.
Need to do this after upgrading the servo on my TRX4. Thanks for the super clear and well made video :)
For those who tried this and it doesn't work, like it works on the left for example and not the right, it is because you can't do this when the servo is reversed like it was on my Rustler VXL, just set it to default and it will work for sure. Cheers :)
hmm I will have to try what you said here as mine doesn't work but I do have it reversed. thanks for this info.
NICE!!!! it worked thank you for posting this!!!!
etcher1981 I'm happy it worked for you too. Cheers :)
Hi! Just like me in my TRX4. How I set it to default? Thanks!
-Off radio.
-Press MENU+SET and turn ON.
-Press MENU x6.
-Press SET.
It works!!!
Huge luv bro. Thanks man.
I have a VXL 2 wd slash ' I put the badlands on her with renegade wheels and the front was hitting the suspension arms sooo bad it would not work.
This fix did her up good. Now all is 100%. 👊😎
Thanks bro.
Thanks for this bro, really helpful. Bought a rustler vxl 4x4 and the servo wasn’t set right so when turning the steering arm was pushing against the main driveshaft lol
Thank you works like a charm❤
Very very concise my friend thank you, I have learnt alot watching your vids thank you.
Glad they help! ;o)
My slash’s steering bell crank is rubbing on the center drive shaft
Best explanation thank you so much
Are parts easily available for the thunder drift? I can't seem to find much info of it. I don't want to spend the cash and not even be able to find a replacement belt
Life saver!!!!
The way he says horn is so funny
After i do the last step set.. final set button the steering looses half its throw? Very frustrating
Same problem here. Once I leave menu it goes back to very little steer. Fixed by using dumborc radio.
@@alroot5452 i just went out and purchased the traxxas link, then all the problems were easily fine tuned to what I needed. 🍻
Ty for your excellent help
thanks!!!!!!! thankyou thank you thannnnkkkk youuuuu!!!
Thank you!!! 🙏
You're welcome!
Great help thank you 😊 🤜
can you do this with the micros as well?
I have the same slash and it steering by itself. Any idea ?
Reciver
Thank you so much for a simple solution!!!!
When steering one way it works perfect, but then trying the other it doesn’t want to turn
How do I do it with a tq transmitter
When I try to set a ep for the right it doesnt work
Try again. I messed up 1st time too. Savox coreless $80 servos are so much stronger than the blue 40 dollar ones. I ran it all summer without setting end points. It should last forever now. The 40$ blue saxox servo lasted about 10 runs (a week) without setting end points on a 2wd stampede. This one over 100 runs last summer and still rockin. I got the high torque savox coreless digital servo fast as can be. I can only imagine the high speed one
@@familyman8644 tried 8 times. I press the set button and it slams the servo to that side all the way. I've repeated the process several times. No luck.
@@jcallesano you have to set it manually. Dont turn all the way when you are holding button to set end point
@@familyman8644 I didn't. I held it back from full about 20% and the second I press "set" the wheels shoot all the way full turned with my finders still holding the wheel. Something ain't right. But its almost not a traxxas servo. Metal gear super speed for racing servo
Yea....well the 2nd I hot the set bottom where I want the steering to stop, it tosses the wheels fully turned to thst side and then it only turns 1/3 of the way the other direction. Doesn't work for me...
i have the same problem, did you found any fix for it?
@@skaaads no sir. I gave up.... did find out that you're able to adjust the steering endpoints from the Traxxas App instead of having to mess with the programming. Hope that helps
@@jcallesano damn, thank you anyways, good i bought a beginner radio+transmitter with display
@@skaaads if you didn't get the transmitter with the Bluetooth module I would suggest spending the extra thirty bucks to get the app you can adjust everything from throttle, braking,ends points, etc from the app.
@@jcallesano well yesterday i bought a new servo because my original broke and also bought a new transmitter with display, people from my area told me most beginner transmitter are better than the traxxas one anyways, so yea, but thanks for the advice!
How about the throttle
My car will turn fully to the left but it won't turn fully to the right what's my problem
cfo auto detail Did you center the servo before attaching the steering linkage?
@@superjoint57 that fixed my problem. 👍👍 cheers bro
@@dangavin Great to hear!!!!
Gracias 😊
mine is not working
Braun Meadows
Hi
Karelle Bypass
Anyone dislike the video try again.
Mertz Pines
Willms Isle
Nitzsche Shoal
0