How to flash GSI on MTK devices using sp flashtool (Its way faster than fastboot)
HTML-код
- Опубликовано: 29 авг 2024
- How to flash GSI on MTK
Twrp port
• [Hovatek] Mediatek aut...
How to backup MTK phones
• How to use wwr v2.51 +...
GSI link
sourceforge.ne...
Music
------------------------------
Waves by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3CAsIPS
Music promoted by Audio Library • Waves - LiQWYD (No Cop...
------------------------------
This is the video i should have started with...... sorry about that.
When you move the GSI into your stock or backup rom Folder dont forget to rename the original system.img.
Because you dont want to lose that......Trust me
After just rename the GSI to system.img and your good
make sure you first backup the stock rom or you have an original rom with your build number, this is very important.
![[Revised] How to use SP Flash tool to flash Mediatek firmware](/img/1.gif)
It worked for me. Thank you very much
Thanks for watching
Awesome!!
Would this work on my Galaxy A31 which uses a mediatek helio P65
must be the same version of android or can be higher?
Any works as long as it's less than the file size of the original
can!!! but can't downgrade 😢
I have no fastboot mode and custom recovery can i install it. My device support project terrible
yes u can do witout wipe data, cache and system.
Hello, I have a moto g22 and it doesn't support TWRP, unfortunately, how can I format it without bricking it? Because, if I format it using fastboot, it will just format normally, but it will keep the operating system, but if I do it using SP FLASH, it will brick.
Let me check
Hey i dont have exp with this device but check out this xda "xdaforums.com/tags/moto-g22/"
Bhai mere pas Tecno Camon 15 pro hai
Ye rom install ho jay ga
I have a Samsung Galaxy A12, Mediatek chip but I wonder will this work on my device?
yeah
As long as its mediaTek give it a try
And for devices that have super.img?
not sure not yet worked with them
unlock bootloader first?
Can it flow with lockbootloader?
as long as you have mtk drivers installed on your pc it will work even with encryption still on
Thanks for watching by the way
sorry i answered the wrong question. Bootloader unlocking is important for flashing roms i always unlock first but i havnt tried spflashtool with locked bootloader. May be you can try it
Oppo devices?
I will get one as soon as I can
@@customandroid2918 ok
Cubot decives working ? (My phone cubot X30)
I really want to play with this phone. Just back it up and git it a try
@@customandroid2918 ok, but phone have to uclock bootloader yes ?
Ohh yes, you need an unlocked bootloader for this to work
Must we use system?
Yes bro, Just rename the original to anything else but dont delete.
using system is the only way sp flashtool can read the GSI and flash it
@@customandroid2918 🤐I don't understand
Don't worry Ill make it more clear
@@mekagaming9439 🙄🤣🤣
Ye ab kaam marega
Will this work on android 6?
Noooo, it won't work. This works for Android 8
@@customandroid2918 Ahh, ok thanks
@@rushg5973 need project treble
Bro i want to talk with you
Personal
I don't have twrp recovery how to clear data cache and system？
Hey thanks for watching. I think this will help
#To erase user data partition
fastboot erase userdata
I got it from
tutorials.how/android/fastboot-commands/
@@customandroid2918 thank you
Hello, i tried this but whenever i try launching the sp flash tool i get an error message "ROM (system) checksum mismatch. What might be the issue?
Can you try other versions of so flash tool
@@customandroid2918 okay lemme try
@@customandroid2918 Do i copy the GSI rom to the firmware folder before or after loading it to the sp flash tool?
YES. First rename the main system.img for the ROM to something else then copy the gsi img into the ROM(firmware) folder and rename it. Then launch spFlashTool
@@customandroid2918 thats what i did but got the checksum error message
fastboot is better
Cool whichever you choose as long as it works