Thank you!! I have gone an entire winter not quite sure what to do… even have my door seals (not sure I bought the ones for bottoms of the doors… but seeing you do this.. I’m feeling like I can do this, so I am going to! I also want to put a window in my steel door.. so :) just fyi in case you are planning to do that, I’ll be watching. Thank you!
Thanks a lot, I work at a Home Depot in the doors and windows department and becoming more educated about stuff like this makes my life a lot easier awesome stuff man
So glad I watched this... I was about to try and replace my threshold or sweep because I could see daylight through it. All I needed to do was adjust those threshold screws! Saved me a lot of time and effort! Thank you!!!
Great idea showing all the options. The best is the hardest, as usual; take off the door. I watched several videos but they seemed lacking. I’m going to go forward now. Thanks for taking the time to show what really works.
Excellent. I want to do this. I’m in a old house so everything needs fixing it replacing RUclips is my favorite school and your a great teacher. Thank You
Thank you for that information just in time for winter. I live just outside of Chicago and it gets really cold. I keep forgetting to fix the doors until the icy arctic wind blows and it's too late. I look forward to more of your videos. 😀
Door Sweeps, and weatherstripping are on the shopping list for the next time we're in town. lol Thank you so much for reminding me to check our doors, they're overdue, and with the cost of utilities nowadays, it's cheaper to maintain your home than contribute to your utilities bill by not doing the maintenance required.
My sweeps just came in the mail today. Since I was able to slip the old ones out, I thought I’d try slipping the new ones in. That only worked about halfway, and then I couldn’t force them in any further. So I pulled them out, and tried pressing them in place. Worked like a charm. The only fly in the ointment was that I didn’t position it carefully, so had to finish up by tapping it carefully from the end, and it slid right in. Perfect fit, lengthwise as well. Repeated that with the second door, except that I positioned it more carefully, and skipped trying to slide it in. Gotta get lucky once in a while. Each one took about five minutes. Might be worth trying this before you go to the trouble of taking the door off the hinges. And now I’m going to buy a spare set of sweeps, since I already know these fit, and they might not be there when I need to replace these. Noticed in the video that someone had possibly put a dab of silicone on the end of the old sweep. That would complicate things. Not saying anyone could do what I did-each situation is unique. But if it doesn’t work, you could always take the door off the hinges at that point.
I bought the brush type and it worked perfectly. You don't have to align it perfectly for it to work. Uneven surfaces actually make it wear a little bit into a perfect fit.
It’s actually great to see you deal with constant problems. Something that seemed easy job turned out to get a bit more complicated. I have the same issue at my house and think is it just me or what?!!
Thanks for making this video. My brother and I watched this video and we were able to replace the concealed door sweep using all of your methods and tips. Thanks for displaying a variety of door sweeps so that after removing the sweep from my door we knew exactly what type to purchase to replace the sweep. Also, your video quality, sound, and camera angle placement allowed us to see exactly what you were doing. Thanks again.
this is my second time to watch this video. I just want to say that you are my favorite channel for home repair and remodeling. It's so nice to have someone who is working on a nice, normal house with a little age on it like mine, who can show me what is being done without a lot of pointless edits or hyped up energy, and who isn't selling me something. When I need to fix or replace something in my house I go straight to you so you can show me how to do it. Thank you so much for being there!
Nice video. Only thing I would change about the final option installation would be to use wood screws to hold the sweep in place. Makes replacing in future a LOT easier ;)
Thank you very much for this video. I was getting all kinds of stuff in my house and could not figure out why. I took a look at the botttoms of my door and discover huge gaps on two of my doors. After watching you video, I went with the slide on version and they are working great. Thank you again, much appreciated.
I used stainless steel wood screws on both sides of the bottom trim piece, and spaced the screws six inches apart. This allowed a firm grim on the door base, with no potential movement. The door manufacturer had used staples which rusted out over the years. The staples coming loose shortened the life of the seal.
Thank you. I went with the easiest option with the U fitment and for less than $20 and about 15 minutes of my time and it is fixed. Thank you for having this resource out there.
Very cool video. I did this for my basement door, actually did more, because I also needed a new threshold. The old one was rotted. I found both parts at Lowes, exactly what I had. I notice your Craftsman flat head screwdriver. I have the exact same one, have used it for many years. I even use it to open oysters in the shell. Perfect for that! My wife is Korean and loves fresh oysters. We buy maybe 30 every week.
This video triggered my PTSD (sorry for exaggerating) but what should have been an easy fix took me three years to complete. The builder of my old house decided to use special doors by Pella… It was not a standard size but it looked really nice. The entry rug was short but not short enough and after a few years the sweep was ruined. I went to a Pella dealer and they helped me find the model number in the jamb and how to submit the order. Great! Simple enough, but I was wrong. The sweep that came was 2 inches too short. Went through that a few more times. But over 30 email exchanges and maybe 20 calls I did get the correct sweep. When I took the door off I was greeted by an army of ants that built a colony in the door because there was no sweep for so long. I’m talking 1,300 ants easily. I was able to eradicate the ants and install the sweep with success. So happy once that ordeal was over!
MY GUY ❤ I really appreciate the final tip with the diverse use of the door 😂 also, thanks again. There are so many small and inexpensive ways to improve seals and improve energy efficiency and costs. I'm learning and legit appreciate your videos.
My front door is 83 years old. Who knows how long the sweep's been on there. Yeah I can see daylight under it. I have a feeling I'll need the universal. And now I just discovered another use for my new electric stapler.
Cool vid ! Enjoyed watching ur step by step instructions. Was easy to follow. Many vids skip too many steps or instructions are too vague. Kudos. Anticipating ur next handy DIY vid. Aloha from Hawaii
Very good! I've got an entrance door that has a draft coming in underneath it in the winter. I'm tired or putting a rolled up piece of thin canvas against it all the time.
Thanks for the video. I have a shed with a metal double door that I need to replace threshold that has come loose and anticipate having to replace the sweep. Since mine are metal doors I suppose I will need to screw into bottom of door. Thanks again for your video. All the best from north Texas.
My front door sweep was damaged when the door was removed for a fridge delivery. Discovered it was a metal sweep that fit into the door jam, now the metal strip is bent and unseated. That explains the years of drafty air, there was never an airtight seal. We used a rolled up blanket every winter. This winter I tried the stick on sweep. It lasted 4 months but worked well. I had to remove the area rug because the sweep was close to the floor. It really blocked air flow. Now I'm going to get a handyman to add the universal sweep. My screen door also needs a new sweep. Looks like there's a channel at the bottom of that door for weatherstrip. Small improvements that can increase comfort tremendously. Oh, a warning about the slide on sweeps, they can hold moisture against the door bottom, causing damage and encouraging bugs.
Thanks for video, sometimes this can be harder than it should be, my junky fiberglass doors only had an 1/8" strip of deteriorating door bottom material to nail into, the rest was styrofoam with a petite wooden frame on the extremities. No way I could nail into it without breaking it so I pre-drilled and used screws. I wanted to replace that thin material since it was deteriorating but I couldn't figure out what it was, it looked like some sort of waterproofed masonite type material. The thin wooden frame was also heavily deteriorated so there wouldn't have been much to attach the new marterial to. I see new doors in my not too distant future :( I think you've got the drip fin facing the wrong way on that door sweep. IIRC the vertical 90 degree elbow part should be facing inwards. It probably doesn't matter on yours since you've got a storm door.
And I thought tin snips only cut tin 🤦♀️ i thought you were gonna glue that sucker in lol omg I love it that ending I got to watch again 😂you’re awesome
Thank you very much for sharing your detailed instructions on replacing a door sweep. Gave me confidence that I can successfully do this project as well.
Terrific video. I think I will be able to do it. We have 6 doors to work on. I'm always afraid hammering a nail but I just have to be very careful. Thank you.
Great video. This was really helpful. The manufacturer for my door recommended using silicone sealant between the (stanley-style) sweep and the door in addition to fastening it with staples, but none of the videos I watched show this. Do you think applying sealant is necessary?
I bought a threshold with adjustable whatever it's called. Got it installed then took rhe cap off and found the aluminum adjuster screws were already destroyed and unusable. Since I glued it and sealed it I wasn't going to rip it out buy another so I went to Home Depot to inquire and they said they stopped supplying that heavy duty threshold. Well because I could adjust it the door sweep that needed to be replaced doesn't fit. I tried the adhesive version it didn't last. Did a slide on one that caused compression against the insulation trim so that didn't work. So I was inclined to close the door and sprayed small gap foam filler waited til it dried and trimmed. But like in your video if I had the good threshold I would done the replacement you did. With modifications as needed. Your video was helpful although I had to make my own air gap stopper.
Cut the sides off the inserts to make them fit the smaller kerf! It's also important to make sure the slope of that L-shaped bottom goes down toward the outside, so water can drain! Door bottoms that have a U or otherwise don't drain are BAD NEWS for exterior doors because they can hold water in and lead to rot.
I didn't have to remove the door from the hinges to replace the kind that has the grooves like you used. With the door open, I pried the old one off with a putty knife and put the new one on.
nice to learn & watch as always. does remind me though that i need to fix the screen/glass door out front since it keeps leaving this 1/4 in gap on the side because for *reasons* my cat cannot stop himself from pushing at the door every time we go outside. aka probably need to like, put a screw in, but still
I used the stick on type at an apartment we stayed at a couple months, the thing didn't last a week. It was off so quick. the floor was uneven and in parts it would drag but in any other position it would not seal at all. The door jam was the lowest part of the floor apparently. Being it was an apartment and we did have rights in our contract to do our own repairs or updates I really didn't want to be taking the door off the hinges and didn't feel like bothering the management about it. We were only on a short month to month lease while our house was being finished thanks to the person that bought our old house breaking our contract and asking us to move out before it was ready.
I’m doing this for a regular room door not an exterior outdoor door like this, it’s a bedroom wood door; I have a door but there is a gap, causing draft and wind and noise, I want to close the gap, I thought of doing exactly what you did in the video, but I also thought of just getting a piece of wood trimmed to right size in thickness and length to cover the gap and attach it to the bottom of the door with the same nails you did at the end here in this video, which do you think will provide better draft and wind and noise coverage? This door sweep you did here, or a wood piece?
I am normally able to remove the seal at the bottom of the door and install the new seal without removing the door. If you open the door, there is plenty of work to do the work ftom underneath.
Same question, I have a heavy duty metal door. I’ll be a 2 man operation taking the door off the hinges. But bigger question, do metal doors have wood inside in the event I have to use nails?
@@gman76utube I opened my door and when l looked at it from the side it sure looks like mdf board or something but wrapped in aluminum. My door is definitely far from heavy duty though.
Hey, Judith! I wonder if the first sticky back seal I showed here would work for that? Can you maybe stick it to the inside of the screen door down tight to the threashold? Either that or maybe search for an original part from Anderson online?
At 3:54 you show that extending that cover to get cover the gap between the door and the frame risks hitting your foot. Makes sense, but wouldn’t you need to extend all the options you showed to cover that space? I ask because I’m replacing a U-shaped sweep with a new one and noticed this light gap with both the old & new ones. The existing door has compression weather stripping on the outside. But I still see light coming through in the bottom corner. Curious if you have thoughts on whether the door sweep should ever be larger than the door.
Subscribe to my channel: bit.ly/SubscribeToTheFixer
Thanks for watching! 😃
GREAT HIDING PLACE Matt👍💯
Too funny 😂😂😂
😬😉
@Rebecca C Ramirez what’s up?
Thank you!! I have gone an entire winter not quite sure what to do… even have my door seals (not sure I bought the ones for bottoms of the doors… but seeing you do this.. I’m feeling like I can do this, so I am going to! I also want to put a window in my steel door.. so :) just fyi in case you are planning to do that, I’ll be watching. Thank you!
Does this work if say you weren't sure if there was a sweep previously? And how about on a storm door?
Thanks a lot, I work at a Home Depot in the doors and windows department and becoming more educated about stuff like this makes my life a lot easier awesome stuff man
Very cool! Happy to help. Thanks for watching!
Hey my brother works at Home Depot as well, not a bad job actually
It’s always good to know your work. I can’t stand going into a hardware store and the folks working don’t know what they’re selling
Maybe you're the guy I couldn't find for help.
Didn't you watch the video before hiring you
Thank you, you made it so easy to understand. Not at all intimidating. My grandson and I will now be able to install without complications.
I love how you show us all the options and how to adjust everything! Thanks Mr Fixer!!!
Thanks for watching!
@@TheFixerHomeRepair you’re awesome man thank you
So glad I watched this... I was about to try and replace my threshold or sweep because I could see daylight through it. All I needed to do was adjust those threshold screws! Saved me a lot of time and effort! Thank you!!!
Great idea showing all the options. The best is the hardest, as usual; take off the door. I watched several videos but they seemed lacking. I’m going to go forward now. Thanks for taking the time to show what really works.
Excellent. I want to do this. I’m in a old house so everything needs fixing it replacing RUclips is my favorite school and your a great teacher. Thank You
Hey! I was in the same situation and we had to fix/replace/remodel a lot because our house was older. Thanks for watching the video!
RUclips is incredibly useful for DIY projects. It's saved me lots of money and a lot of household repairs I've learned how to do.
Thank you for that information just in time for winter. I live just outside of Chicago and it gets really cold. I keep forgetting to fix the doors until the icy arctic wind blows and it's too late. I look forward to more of your videos. 😀
Most my fam in Chicago. The lake seems to make it so cold there❄️ Hello from Colorado. 👋
Thanks for the video! Now I can tell my husband how to fix the draft at the front door!!😂
Door Sweeps, and weatherstripping are on the shopping list for the next time we're in town. lol Thank you so much for reminding me to check our doors, they're overdue, and with the cost of utilities nowadays, it's cheaper to maintain your home than contribute to your utilities bill by not doing the maintenance required.
My sweeps just came in the mail today. Since I was able to slip the old ones out, I thought I’d try slipping the new ones in. That only worked about halfway, and then I couldn’t force them in any further. So I pulled them out, and tried pressing them in place. Worked like a charm. The only fly in the ointment was that I didn’t position it carefully, so had to finish up by tapping it carefully from the end, and it slid right in. Perfect fit, lengthwise as well.
Repeated that with the second door, except that I positioned it more carefully, and skipped trying to slide it in. Gotta get lucky once in a while. Each one took about five minutes. Might be worth trying this before you go to the trouble of taking the door off the hinges.
And now I’m going to buy a spare set of sweeps, since I already know these fit, and they might not be there when I need to replace these.
Noticed in the video that someone had possibly put a dab of silicone on the end of the old sweep. That would complicate things. Not saying anyone could do what I did-each situation is unique. But if it doesn’t work, you could always take the door off the hinges at that point.
I bought the brush type and it worked perfectly. You don't have to align it perfectly for it to work. Uneven surfaces actually make it wear a little bit into a perfect fit.
It’s actually great to see you deal with constant problems. Something that seemed easy job turned out to get a bit more complicated. I have the same issue at my house and think is it just me or what?!!
Count me in that club.
As a general rule I gotten to the point of keeping an open mind about the difficulty of any repair job. Seems I never know exactly what I'll find.
Thanks for making this video. My brother and I watched this video and we were able to replace the concealed door sweep using all of your methods and tips. Thanks for displaying a variety of door sweeps so that after removing the sweep from my door we knew exactly what type to purchase to replace the sweep. Also, your video quality, sound, and camera angle placement allowed us to see exactly what you were doing. Thanks again.
this is my second time to watch this video. I just want to say that you are my favorite channel for home repair and remodeling. It's so nice to have someone who is working on a nice, normal house with a little age on it like mine, who can show me what is being done without a lot of pointless edits or hyped up energy, and who isn't selling me something. When I need to fix or replace something in my house I go straight to you so you can show me how to do it. Thank you so much for being there!
Hey! Thanks so much for the comment and watching my videos. I really do appreciate it! 😃
Nice video. Only thing I would change about the final option installation would be to use wood screws to hold the sweep in place. Makes replacing in future a LOT easier ;)
Thank you very much for this video. I was getting all kinds of stuff in my house and could not figure out why. I took a look at the botttoms of my door and discover huge gaps on two of my doors. After watching you video, I went with the slide on version and they are working great. Thank you again, much appreciated.
I used stainless steel wood screws on both sides of the bottom trim piece, and spaced the screws six inches apart. This allowed a firm grim on the door base, with no potential movement. The door manufacturer had used staples which rusted out over the years. The staples coming loose shortened the life of the seal.
What size did you use? Is there a particular one you liked that you can link?
We need this done badly in our apt. You can see daylight really good and the amount of bugs that come in is ridiculous.
Thank you so much for this. 🙏🏽
I love it when a plan comes together.
We just replaced the door sweep on my patio door today, thanks to your excellent video. Thanks! 😊
Thanks brother you are a lifesaver
I never knew what that hole in the bottom of the door was for, now I know. 🤣 Great video as usual. Looking forward to the next one.
😂😬👍
The drug sniffing dog knew what was up.
Thanks for showing the errors too!
Thank you. I went with the easiest option with the U fitment and for less than $20 and about 15 minutes of my time and it is fixed. Thank you for having this resource out there.
Helpful, and straight to the point! Appreciate the content. New home owner here. Keep these helpful videos coming!
Very cool video. I did this for my basement door, actually did more, because I also needed a new threshold. The old one was rotted. I found both parts at Lowes, exactly what I had. I notice your Craftsman flat head screwdriver. I have the exact same one, have used it for many years. I even use it to open oysters in the shell. Perfect for that! My wife is Korean and loves fresh oysters. We buy maybe 30 every week.
Thanks for the comment! 😁
This video triggered my PTSD (sorry for exaggerating) but what should have been an easy fix took me three years to complete. The builder of my old house decided to use special doors by Pella… It was not a standard size but it looked really nice. The entry rug was short but not short enough and after a few years the sweep was ruined. I went to a Pella dealer and they helped me find the model number in the jamb and how to submit the order. Great! Simple enough, but I was wrong. The sweep that came was 2 inches too short. Went through that a few more times. But over 30 email exchanges and maybe 20 calls I did get the correct sweep. When I took the door off I was greeted by an army of ants that built a colony in the door because there was no sweep for so long. I’m talking 1,300 ants easily. I was able to eradicate the ants and install the sweep with success. So happy once that ordeal was over!
Wow... I'm thinking this is a woman
Just did that today!!. Was helpful to see what I needed to do before taking my door off.
I remove my door sweep and install the new one without taking the door from the hinges. It worked for me 🙂.
I'm so glad you pointed out the adjustable piece at the end. I was wondering wth that was on mine. Thanks
MY GUY ❤ I really appreciate the final tip with the diverse use of the door 😂 also, thanks again. There are so many small and inexpensive ways to improve seals and improve energy efficiency and costs. I'm learning and legit appreciate your videos.
My front door is 83 years old. Who knows how long the sweep's been on there. Yeah I can see daylight under it. I have a feeling I'll need the universal. And now I just discovered another use for my new electric stapler.
Stainless steel screws instead will avoid the staples rusting out in a few years...
Cool vid ! Enjoyed watching ur step by step instructions. Was easy to follow. Many vids skip too many steps or instructions are too vague. Kudos. Anticipating ur next handy DIY vid. Aloha from Hawaii
Very good! I've got an entrance door that has a draft coming in underneath it in the winter. I'm tired or putting a rolled up piece of thin canvas against it all the time.
Thanks for the video. I have a shed with a metal double door that I need to replace threshold that has come loose and anticipate having to replace the sweep. Since mine are metal doors I suppose I will need to screw into bottom of door. Thanks again for your video. All the best from north Texas.
My front door sweep was damaged when the door was removed for a fridge delivery. Discovered it was a metal sweep that fit into the door jam, now the metal strip is bent and unseated. That explains the years of drafty air, there was never an airtight seal. We used a rolled up blanket every winter. This winter I tried the stick on sweep. It lasted 4 months but worked well. I had to remove the area rug because the sweep was close to the floor. It really blocked air flow. Now I'm going to get a handyman to add the universal sweep. My screen door also needs a new sweep. Looks like there's a channel at the bottom of that door for weatherstrip. Small improvements that can increase comfort tremendously.
Oh, a warning about the slide on sweeps, they can hold moisture against the door bottom, causing damage and encouraging bugs.
Thanks for video, sometimes this can be harder than it should be, my junky fiberglass doors only had an 1/8" strip of deteriorating door bottom material to nail into, the rest was styrofoam with a petite wooden frame on the extremities. No way I could nail into it without breaking it so I pre-drilled and used screws. I wanted to replace that thin material since it was deteriorating but I couldn't figure out what it was, it looked like some sort of waterproofed masonite type material. The thin wooden frame was also heavily deteriorated so there wouldn't have been much to attach the new marterial to. I see new doors in my not too distant future :(
I think you've got the drip fin facing the wrong way on that door sweep. IIRC the vertical 90 degree elbow part should be facing inwards. It probably doesn't matter on yours since you've got a storm door.
I didn't know about the Stanley type existed. You just saved me some money on my next weekend project. Thanks
I seriously love this channel. I remembered watching this some time ago and now I need to replace mine. You rock 👍🏽
Thank you!
Bought a used house recently and their exterior garage is in need of weatherstrip and the door sweep. Thank you!
Im saying goodbye to my winter rolled up towel draft blocker!!! 😆👍🏼🎉
Your video was just what I needed to take care of this task today. Thanks!
And I thought tin snips only cut tin 🤦♀️ i thought you were gonna glue that sucker in lol omg I love it that ending I got to watch again 😂you’re awesome
😂 Thanks for watching!
I appreciate the options including the ignore option.
Can you put a door dradt stopper on the outside of the door for a short term solution to water getting inside?
Thank you very much for sharing your detailed instructions on replacing a door sweep. Gave me confidence that I can successfully do this project as well.
Great video thank you for your time. I have battled this door for a long time and hopefully I can get it fixed now
Luv that he didn't mention his mistake at cutting the wrong end... you know what I'm talking about
I don't think it was about the side, it's the length unless I
missed it.
I like hearing about the alternatives and the tradeoffs among them.
Terrific video. I think I will be able to do it. We have 6 doors to work on. I'm always afraid hammering a nail but I just have to be very careful. Thank you.
Winter around the corner, these are great tips! Thank you.
Great video. This was really helpful.
The manufacturer for my door recommended using silicone sealant between the (stanley-style) sweep and the door in addition to fastening it with staples, but none of the videos I watched show this. Do you think applying sealant is necessary?
My only thing with that is if it needs to be replaced again. Will just make it a little more difficult. But not a bad idea.
I bought a threshold with adjustable whatever it's called. Got it installed then took rhe cap off and found the aluminum adjuster screws were already destroyed and unusable. Since I glued it and sealed it I wasn't going to rip it out buy another so I went to Home Depot to inquire and they said they stopped supplying that heavy duty threshold. Well because I could adjust it the door sweep that needed to be replaced doesn't fit. I tried the adhesive version it didn't last. Did a slide on one that caused compression against the insulation trim so that didn't work. So I was inclined to close the door and sprayed small gap foam filler waited til it dried and trimmed. But like in your video if I had the good threshold I would done the replacement you did. With modifications as needed. Your video was helpful although I had to make my own air gap stopper.
Thank you for this, it saved me a lot of time seeing the options and understanding the effort involved
Very cool! I didn't know I could adjust my threshold like that
Happy to help!
Me either. This is awesome
Cut the sides off the inserts to make them fit the smaller kerf!
It's also important to make sure the slope of that L-shaped bottom goes down toward the outside, so water can drain! Door bottoms that have a U or otherwise don't drain are BAD NEWS for exterior doors because they can hold water in and lead to rot.
If you have a storm door, this is irrelevant.
You can always screw in the adhesive one to the door, for those who don't want to remove the door?
Thank you. Awesome video. I appreciate you showing multiple applications. And you make it look very easy. ❤
Thank you. As a single women , I will be able to use a couple of these. Thank you for the options. Made it easy for me. Blessings
The slide on sweeps will hold moisture against a door, encouraging rot and bugs. Just fyi.
I DID NOT know those screws were for adjusting the height of the threshold!!
I didn't have to remove the door from the hinges to replace the kind that has the grooves like you used. With the door open, I pried the old one off with a putty knife and put the new one on.
😊 Thanks for showing me all of the simple things (good & bad) I will encounter
had the same problem with my Stanley door destroyed two of those sweeps next time will use the universal sweep
nice to learn & watch as always. does remind me though that i need to fix the screen/glass door out front since it keeps leaving this 1/4 in gap on the side because for *reasons* my cat cannot stop himself from pushing at the door every time we go outside. aka probably need to like, put a screw in, but still
Thank you! Question? I think im going to use the adhesive one. Do u use it on both sides of the door or will one side do?
Thank you showing multiple options.
Extremely helpful, Thank you!
I used the stick on type at an apartment we stayed at a couple months, the thing didn't last a week. It was off so quick. the floor was uneven and in parts it would drag but in any other position it would not seal at all. The door jam was the lowest part of the floor apparently. Being it was an apartment and we did have rights in our contract to do our own repairs or updates I really didn't want to be taking the door off the hinges and didn't feel like bothering the management about it. We were only on a short month to month lease while our house was being finished thanks to the person that bought our old house breaking our contract and asking us to move out before it was ready.
Outstanding video, all the info I needed for my home repair task today. Thanks for making it.
How'd I miss those one when I needed it so bad? 😂
03:04 Not a good option. You're correct, it doesn't stick for long.
Thank you for the video 😎👍
Thanks for watching!
As usual great video how about on a storm door replacing the sweep, can you make something for that type of door>?
8:50 "Are you kidding me" LOL! That's my world more than I'd like to admit.
I can attest those stick on types fail in the Florida heat.
Thank you for the info, Gail! I kinda figured that would be the case!
I’m doing this for a regular room door not an exterior outdoor door like this, it’s a bedroom wood door; I have a door but there is a gap, causing draft and wind and noise, I want to close the gap, I thought of doing exactly what you did in the video, but I also thought of just getting a piece of wood trimmed to right size in thickness and length to cover the gap and attach it to the bottom of the door with the same nails you did at the end here in this video, which do you think will provide better draft and wind and noise coverage? This door sweep you did here, or a wood piece?
Your tutorial was very helpful. Thank you Fixer!
I am normally able to remove the seal at the bottom of the door and install the new seal without removing the door. If you open the door, there is plenty of work to do the work ftom underneath.
Hi ! Will this work on a metal door? If not, do you have any suggestions ?
Thank you. Love your videos !
Same question, I have a heavy duty metal door. I’ll be a 2 man operation taking the door off the hinges. But bigger question, do metal doors have wood inside in the event I have to use nails?
@@gman76utube I opened my door and when l looked at it from the side it sure looks like mdf board or something but wrapped in aluminum. My door is definitely far from heavy duty though.
Great video. Looking to this this with a couple of doors in my house. This is very helpful. Thanks
Lol! Very helpful and glad I let it play til the end. Got me tickled
Great video !!! Thanks
Score, then bend to snap, great tip!
Thanks very much. Exactly what I need instructions on replacing door sweep.
Glad the video could help!
Best tutorial on RUclips
Thanks!
Great information. My Andersen screen door’s seal, at the bottom, is falling off, but it’s only a thin piece of rubber. How can that be replaced?
Hey, Judith! I wonder if the first sticky back seal I showed here would work for that? Can you maybe stick it to the inside of the screen door down tight to the threashold? Either that or maybe search for an original part from Anderson online?
@@TheFixerHomeRepair Thank you for responding. I will check with Andersen. I will probably have to remove the door. Eek.
With that lip on the outside, might rainwater collect between the seal and the door causing the door to rot or the floor to get wet?
These work great until the fins snap off.
They need to add more silicone to the mix to make them more pliable.
I know I'm getting old when I found the finished door sweep so satisfying
😂
Haha me to
Very well explained ! Thank you.
Great video and information.
Thanks.
At 3:54 you show that extending that cover to get cover the gap between the door and the frame risks hitting your foot. Makes sense, but wouldn’t you need to extend all the options you showed to cover that space? I ask because I’m replacing a U-shaped sweep with a new one and noticed this light gap with both the old & new ones. The existing door has compression weather stripping on the outside. But I still see light coming through in the bottom corner. Curious if you have thoughts on whether the door sweep should ever be larger than the door.
Should you do this routinely or only if you can see light coming through?
Thanks now i know i can keep them salamanders out the house. Any tips how to deal with bugs in the light
Just found you! Very helpful…. Love the out takes at the end… very funny and in keeping with how I would do it 😂🤪 thanks for the tips
Thanks for watching!
Comprehensive and informative! Thank you for the information!
Thanks for watching, Chris!
Thanks for the video, helped me tremendously.
Thanks for sharing. Now it gives me the idea how to work on it.
Thank you for sharing your talents with me!!!❤
Excellent video. I so needed this. Thank you!
Just what I needed! Thank you!