update update Gear Oil Change CENDG2110206003 Change gear oil Initially after 20 hours (1 month) and every 100 hours (12 months) 1) Place outboard motor upright on a level surface. 2) Place a container under the lower unit. 3) Remove lower gear oil drain plug (1) first, then remove gear oil level plug (2) and drain gear oil. 4) Fill with recommended gear oil through oil drain hole until oil just starts to flow out from oil level hole. Recommended gear oil • Suzuki Outboard Motor Gear Oil or API classification GL5, Viscosity rating SAE # 90 Hypoid gear oil. Gear oil amount 1050 ml (35.5/37.0 US/Imp. oz) 5) Install oil level plug before removing oil filler tube from drain hole. 6) Install oil drain plug. NOTICE An used gasket may leak and allow water to enter the gearcase causing severe damage. Do not reuse gaskets once removed. Always use a new gasket. NOTE To avoid a possible low gear oil level, recheck gear oil level 10 minutes after doing procedure in step 6. If oil level is low, add additional gear oil until level is correct.
all pumps are universal or have universal connections .. pump in from lower hole to avoid putting air in the lower unit/. when you see fluid on top hole you are done here is a pump from walmart dont use the metal part. I use a tier tool as my flat screw driver jumbo screw driver needed www.walmart.com/ip/Attwood-11891D7-Gear-Lube-Pump-For-Use-With-32-Ounce-Gear-Lube-Bottle-Universal-Fit-Includes-1-Yamaha-Adapter/16351021
Hey man, great video. What hp motor do you have? I have a 04 Johnson 140hp 4 stroke, the motors look and have similar parts. Just woundering if the gear oil would be the same?
all pleaser boats use the same gear fluid . watch the video 50 things it is boarding but if you are new to boating .. it will make you a pro right away
yah come back 2 weeks from now and pick up the boat and dont forget $400 check.. if you are in saltwater you need to loosen and tighten the lower unit bolt every 100hrs or they will break off when its time to change impeller impeller can last a long time here in Texas or Florida AS MUCH AS 600 HRS but the book says change it every 100 hrs. i keep the bolts coded with never cease as I broke them off on my last engine
Walmart academy anywhere that sells boating equipment www.walmart.com/ip/Attwood-11891D7-Gear-Lube-Pump-For-Use-With-32-Ounce-Gear-Lube-Bottle-Universal-Fit-Includes-1-Yamaha-Adapter/16351021
15000 views and not a single question .. ask it cost you nothing and let me know if you manage to get it done . .you just save $150 and got the boat back one month earlier because you did the work yourself .. good job . .let me know if you did it or you chickened out .. it is easy .. just make sure you take the used oil to any auto part for recycling and it is free to you. .if you live in usa
80w-90 gear oil .. you may want to buy two since pumping the last few drops out gets to be a pain and I use the second bottle to finish the job . sold at Walmart , academy auto parts
connect the pump to lower hole and pump . when you see the fluid on top you are done . use a very big screw driver i use tire tool for my truck to open the screw
you cant be a hero if you got a zero. 99.9% will not support except you , Dont let me have a zero subscriber .
Very helpful! Thank you!!!
update update Gear Oil Change
CENDG2110206003
Change gear oil
Initially after 20 hours (1 month) and every 100 hours
(12 months)
1) Place outboard motor upright on a level surface.
2) Place a container under the lower unit.
3) Remove lower gear oil drain plug (1) first, then
remove gear oil level plug (2) and drain gear oil.
4) Fill with recommended gear oil through oil drain hole
until oil just starts to flow out from oil level hole.
Recommended gear oil
• Suzuki Outboard Motor Gear Oil or API
classification GL5, Viscosity rating SAE # 90
Hypoid gear oil.
Gear oil amount
1050 ml (35.5/37.0 US/Imp. oz)
5) Install oil level plug before removing oil filler tube
from drain hole.
6) Install oil drain plug.
NOTICE
An used gasket may leak and allow water to
enter the gearcase causing severe damage.
Do not reuse gaskets once removed.
Always use a new gasket.
NOTE
To avoid a possible low gear oil level,
recheck gear oil level 10 minutes after doing
procedure in step 6. If oil level is low, add
additional gear oil until level is correct.
watch reset of titan videos that cover common repair with titan
what dimension is plug for the suzuki lower unit? I do not know which pump to buy that will work with the suzuki outboard
all pumps are universal or have universal connections .. pump in from lower hole to avoid putting air in the lower unit/. when you see fluid on top hole you are done here is a pump from walmart dont use the metal part. I use a tier tool as my flat screw driver jumbo screw driver needed
www.walmart.com/ip/Attwood-11891D7-Gear-Lube-Pump-For-Use-With-32-Ounce-Gear-Lube-Bottle-Universal-Fit-Includes-1-Yamaha-Adapter/16351021
Hey man, great video. What hp motor do you have? I have a 04 Johnson 140hp 4 stroke, the motors look and have similar parts. Just woundering if the gear oil would be the same?
all motor boats use same gear oil.. if you become member for free you can call cell .. it is free subscription
all pleaser boats use the same gear fluid . watch the video 50 things it is boarding but if you are new to boating .. it will make you a pro right away
Alright thanks for the info. The marina wanted 400$ to do a service. I've done the oil change and planning to do the gear oil next.
yah come back 2 weeks from now and pick up the boat and dont forget $400 check..
if you are in saltwater you need to loosen and tighten the lower unit bolt every 100hrs or they will break off when its time to change impeller
impeller can last a long time here in Texas or Florida AS MUCH AS 600 HRS but the book says change it every 100 hrs. i keep the bolts coded with never cease as I broke them off on my last engine
Where do you get the pump at
Walmart academy anywhere that sells boating equipment
www.walmart.com/ip/Attwood-11891D7-Gear-Lube-Pump-For-Use-With-32-Ounce-Gear-Lube-Bottle-Universal-Fit-Includes-1-Yamaha-Adapter/16351021
15000 views and not a single question .. ask it cost you nothing and let me know if you manage to get it done . .you just save $150 and got the boat back one month earlier because you did the work yourself .. good job . .let me know if you did it or you chickened out .. it is easy .. just make sure you take the used oil to any auto part for recycling and it is free to you. .if you live in usa
boashna what type of oil can you use? I have a 05 225hp 4 stroke
boashna in the lower unit?
80w-90 gear oil .. you may want to buy two since pumping the last few drops out gets to be a pain and I use the second bottle to finish the job . sold at Walmart , academy auto parts
Not all
connect the pump to lower hole and pump . when you see the fluid on top you are done . use a very big screw driver i use tire tool for my truck to open the screw