I Built an OFF GRID 3D Printing Station
HTML-код
- Опубликовано: 13 сен 2024
- 3D PRINT FROM ANYWHERE.
Get 5% off an EcoFlow DELTA II until October 16th with code V6A7KQFJ
EcoFlow Website : us.ecoflow.com...
EcoFlow Amazon: amzn.to/3RaVDAe
Ikea LACK corner enclosure: www.printables...
FREE 3D PRINTED REPAIRS AT THE MAKER BEAN CAFE:
Episode 1: • Free 3D Printed Repair...
Episode 2: • I Spent a Day 3D Print...
This project was inspired by @vanneistat - • Is It Honest to Call T...
Support this channel:
PATREON: / morleykert
STL FILES: morleykert.com...
MERCH: morleykert.mys...
THINGS I USED IN THIS VIDEO:
RYOBI Cordless Circular Saw: amzn.to/3RF2u5Q
Kreg Pocket Hole Jig: amzn.to/3Dm2m6F
DEWALT 10-Inch Table Saw: amzn.to/3IJPjfQ
FastCap Lefty Righty Tape Measure: amzn.to/3PAA1ws
RYOBI 4Ah High Performance Batteries: amzn.to/3uQ58Mv
RYOBI Impact Driver + Drill/Driver Combo Kit: amzn.to/3OcBRTO
RYOBI cordless brad nailer - amzn.to/3E8KfPP
Prusa i3 MK3S 3D Printer: www.prusa3d.co...
PETG filament: amzn.to/3RRf95Z
PLA+ filament (denim blue): amzn.to/3qMatSl
Calipers: amzn.to/3xTF5pB
5 minute epoxy: amzn.to/3AGOoLg
OTHER TOOLS I LIKE TO USE:
www.amazon.com...
Note: The above shopping links are affiliate links, meaning that, at no additional cost to you, I may earn a commission if you click through and make a purchase.
You can see more of my work and behind-the-scenes content on:
INSTAGRAM: / morleykert
TWITTER: / morleykert
TIKTOK: vm.tiktok.com/...
I'm also on these podcasts!
Into the Spotlight: anchor.fm/into...
CLAMP: www.clampcast....
morleykert.com/
#EcoFlow #PortableGenerator #PortablePowerStation #bestportablepowerstation #SolarPanels
Rather than loosing the swivel. I suggest you find a way to lock two of the wheels from swiveling with a pin or some wood that swings down to block them from swiveling. This makes it way easier to controll when navigating sloped terrain and gives you the benefit of being able to translate and rotate the table when stationary.
Coming from someone who loves things to be organized and orderly, I love this whole project! So much fun, especially riding around on the cart!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
You should look into the gridfinity setup, I just recently found it and I think this would be a great application for it! They make bases that magnetized so that your organizers do not fall off the cart during transit!
Shout out to Zack Freedman!!! That dude is a legend!!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
I think charging phone and microphone case (so devices with usb-cable and charger) directly from the usb ports of the powerstation should be more efficent, as the chargers take 120 / 240 Volts and transform them to 5V, and the usb outlets on the battery should run a 5V system..🤔
💯
Already my favorite video! Cannot wait 😂
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
Behind every good man is a good woman. Great to see the dynamics between you and Eden
My fave version is "Behind every successful man is a surprised woman." :-)
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
I worked at a solar company and volunteered on weekends to power a coffee shop two espresso machines and two crepe makers, that is 8000 watts of energy and I would bring a solar trailer down and have a booth next to them, powering them for 5 hours and talking about solar for people... Loved it!! I love the stuff you do , have 3 printers myself and making an off grid office for everything.. two deltas and a prusa mk3s.. Charge on!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
I love that table design. I think I will be building one for my workshop.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
Oh yes!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
Super cool project! Love it! 👏😎
Good job, I applaud your social involvement! That shuttle system looks fun. You need a canopy of umbrella for a hot or rainy day. You have space under the desk for some tool and supplies drawers. I will be watching to see how things develop.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
Push/pull from the heavy end (battery end), this should help with control
ALSO YESSS KATHY KERT! love that shout out!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
Those wheels are way bigger than what I was imagining based on our conversation on the CLAMP podcast. Looks like they worked great
Add a solar panel to your rig, and charge the EcoFlow while you are using it. Now you are giving me ideas. I love this kind of stuff. Yay to the nerdz~!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
Cool video. Great story. Nice portable bench. Very rugged. Mahalo for sharing! 🙂🐒
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
I was legitimately just looking at this enclosure project this morning. Glad I subbed to this channel.
I love this series! Add a power strip for your laptop and accessories. Also if you added a gear rack underneath, you could carry an easy up for some shade! I really want to do something similar but I will build mine as a trailer for my ebike!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
Four smart wheels makes a dumb cart…lose the swivels under the ecoflow and you’ll have all the control your looking for. Awesome build and idea.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
I'm so jealous of the ecoflow
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
1:46 i like the detail of the screwing being sychronized to the music :D
Wow this will be really cool with faster printers now on the market, keep it up
Just gotta say, I appreciated the timing up of the impact driver with the beat of the music. I see what you did there and it was enjoyed lol
When I joined, Morley had like 50k subs. And that's like 3 week ago. Holy shit this channel is growing fast.
I built the ikea lack table for my friends table i was so proud since it was my first real useful 3d project!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
I'm pretty sure the magnet holder pieces for the enclosure are supposed to be using the existing screw holes so that the door panels end up parallel to the top and bottom of the enclosure.
Very nice! Looking forward to the next public printing video.
Crazy to see how your channel has absolutely exploded after the pallet table videos. I'm happy for you, great job! :D
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
The b-roll endings never missing.. 🤣
Nice vid guys!
Add some suspensions to the wheels!
Also I've watched someone building a mini camper cabin towable with a bicycle, later upgraded the bike to an e-bike too, if you know what I mean ;)
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
nice musical track with the drilling my dude! also sweet table build in general too! love my kreg pocket hole jig. perfect one wheel sequence btw! just gonna comment as i go here haha
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
Here is a crazy idea (or not so crazy 😀) - motorize it and fit GPS. You could then have a self-driving, off-grid 3D printing station 😎
Looking forward to the next video.
I think placing the laptop under a shadow/shade will help! That way you can reduce the brightness and save energy. Using a laptop under the sun is nigh impossible, at least imo, without full brightness.
Groovy setup! Probably a good idea to put some sort of hood over the filament spool in case it rains, though.
soo dope MORLEY!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
Install two stationary wheels and two swivel. This will allow you to steer better with no drift.
this is a dope stand and sheesh loving your crafting skills!!!
Duuude!! Yes!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
Tip with the encolser, the dors broke on mine a few times found it helpful to piano hinges
3d print some wheel steer locks that screw in with the 2 front wheel mounts that simply just hold the 2 in place
I would either use fixed casters on one end or, if you could lock the swivel on one end straight do it.
I've used both styles and 4 swivels requires 2 people to move it easily
Loved this build Morley.what a great idea 💡
I think the magnetic Doorholder screw in the original IKEA hole, on the Plate. Now you Doors stick out of the "cube". the should be a little inset. I mean, looks like there should be.
yeooow more eden on the mic pls! haha
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
Amazing Idea!! Cant wait to see it in action😁
Your product is amazing, no doubt, I learned a lot from you, one more thing is that you make videos with good music, I wish you more success.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
You missed a chance to recycle a pallet! Definitely suggest locking the spin on the front two wheels, but if you can make it so you can enable/disable the swivel with a latch or a bar that you can remove.
Will be awesome to watch this
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
I never thought to use IKEA tables to have enclosure to a 3d printer. But this us actually gives enough stability with weight. Together with small magnets results a perfect cabinet. If I add design to hold the heat, temperature it will be amazing.
Hey, awesome idea! Maybe its an idea to lock the wheels on one side of the table so that they can't rotate. This makes it much easier to ride, keep up the great work!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
If you tune for printing on a cold bed (blue tape or glue stick or even just buildtak) you can run a printer on under 100W.
You should make the wheels of the table rotating only on the side of the handle, for easier manevour :D
Looking good Morley! Come and visit us near SF!
I LOVE LOVE LOVE the awareness you try to spread about 3D Printing. You rock!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ..
You need to print a holder for the conical dixie cups. No way to put it down without a holder. Plus, you need a bracket on the table to add a changeable sign. Free 3D Printed Repairs. or Free the Filament. Something like that. I enjoy these real world solution videos so much. They are terrific. I think there is an entire universe of Ikea modders. (I think IKEA are initials for the founder and where he started.)
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
Nice job. Can you connect the table with a e-bike or a lawn mower then you can go long distance minus the sweat.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
Seeing you charge your phone and other stuff from the AC outlets when there are the usb ports on the other side was so painful hahahha great project!
You should replace two of the castors with fixed castors so that you can push it easier
Super cool! Loving the new vids and ideas.
I think if you wanted to have the back side wheels stay in one direction for ease of travel, instead of changing out the wheels, you could possible have wooden/metal dowels lever or slide down on both sides of each wheel to stop them from rotating around fully.
Like so:
Unlocked: (wheel freely moving 360°)
\| |/ Or || ||
[] []
locked:
| | Or | |
\[]/ |[]|
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
As others have indicated, two fixed wheels and two rotating wheels is the way to go. With the rotating wheels on the side with the handle. I worked somewhere where we had a lot of stuff to move around on carts, and for some reason, one of them had four rotating wheels. It was a total bitch to get around! great project, by the way!
Hi Morley, that was another great video, l enjoy watching your videos.
Hey, if the Power station has a 24V DC output, use that since inverting it to 240V AC and then back to 24V DC loses a lot of power.
lock a couple of wheels straight. it should make steering easier.
How cool is that!!! I'm impressed by everything! And whoever design the 3D printed parts for the enclosure... genius! Now I wish we had a 3D printer.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
Grate project. I like the idea.I am from South Africa and I am very much interested in the power station.
Maby it is fun to try if you can ride whit your desk while the 3d printer is running to test if that whil change te quality of the print
I love the amount of time you dedicated to "testing" the table after fixing the wheels. 😂😂
Wow! Just WOW!!!
Once again, I'm loving this concept!
Very cool. 👍
I love stuff like this, I bought an ender 3 and an ezabl and just couldnt get it to work sadly something in the software just kept drilling the nozzle into the bed Actually just bought a resin printer as they tend to just work fingers crossed lol
Btw I'm in toronto, too. Just started learning CNC, and set up a Onefinity journeyman in my garage. If you need anything CNC'd lmk. Or if you just want to give it the ole college try.
Wow what an amazing thing you’ve created, it has potential to be even better over time as u can upgrade things like power bank etc. 😊
I wonder if you could just drill a hole in the casters and drop a screw in to temporarily fix them in 1 position!?
You should make a handle that when you are gripping it, it locks the opposite side wheels to one going forward and back, and when you let go they all 4 move freely. For the handle I was thinking a bar like a push lawnmower
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
You should stain and varnish that table it’d look great
Great work! Fun to Watch.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
Waw! I really love the idea! And also I love to see your persistency! Keep up the good work!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
Just found your videos by coincidence because i was looking for some 3d printer settings, absolutly love your channel :) 100% subbed
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
Very nice concept/prototype!
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
10:09 Damn boi 😂😂😂
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
This is a Great idea
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ...
3:30 like hospital and going for surgery XD
dang you really love apoxy
Im so sad I wasnt able to come ;( as a 3d printer designer my self I can appreciate the work that you do especially for the poeple of the community! I will visit next time
“I saw you…” whilst sawing… lol 😂
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
This is a brilliant idea for the enclosure. I will definitely build this too.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
Been watching since you had 8k subs, always a good day when you upload! Keep it up
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble .
I have been checking back for an update on your channel, as I like the combination of 3d printing and fusion. I started using Fusion this year and it has been a blast to develop skills in. There are a few areas that have been a struggle, but its been interesting overcoming various challenges to make parts fit as expected. I wish I was in your town to stop by at one of these meet ups for 3d printing.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
Reminds me of trying to shop at IKEA
Need to figure out how to make the table move better. Maybe some counterweights for the printer put under the table? Idk
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
So, a commercial then! LOL
You should print IN MOTION - no need to stop printing when driving around ;-)
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ...
It’s always a good day when Kert uploads, can’t wait man. ❤
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt ..
Good stuff! Nice work.
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ For Pröfïtãble Ïnvëstmënt .
great video! should've done a shot of you wheeling the whole thing around town while still printing, that would've been funny af. other than that great stuff, looking forward to the next one
Thanks for watching! Next one has some in motion printing 😊
I want to do this in austin!
very curious why you didn't use the USB ports in the front. Charging using the AC bricks means a DC to ac to DC flow and a lot of waste heat. Maybe next time ;)
Gat station on the go 🤔
Great Idea, cant you put something on the wheels to stop 2 of them from twisting
👆👆✍️
ʟᴇᴛ'ꜱ ᴛᴀʟᴋ
▶️ Í'll Íñtródúçé You Tó Sóméthíñg Pröfïtãble ..
So awesome!!