All of this series are fantastic tutorials, I for one really appreciate you taking the time to show us how to use the kits and teaching us new techniques. Thanks!
Great project. Some people may or may not know-- if you lay down a seam like you did at around 2:09, if you set your machine to throw a little bit of a longer stitch, it won't pucker the material so much. Thanks for posting this one. I must try it.
I just put two medium bags together this weekend. Really fun project! I would lone to see you come out with a large bag kit. The medium didn’t quite fit my EE quilt. It will fit my down jacket and spare clothes though!
Alright RBTR with covid keeping a lot of us home you should expand your MYOG videos and give us more projects! Like the hip belt pouch kit or the flat zippered pouch kit, or even masks!
DUDE, Love your stuff! Between you and Dutchware I've made so much gear. From your fantastic fabrics I've made a tarp for my hammock (1.1 oz Silpoly 2nd Gen - Coyote Brown) and a 11' hammock (1.6 oz HyperD XL - Dark Brown) Tiedowns for my Kayaks (1" Polyester webbing 3000 lb), tent exit mats, and now a couple zip pouches from some extra material ( bases on your ZPP Kit). One thing I would like to know is what size material makes what size bag? My first ones will be bases on your 14"x14" size piece. What size material would I need (and zipper length) for a 12"w x 8"D X 8" high pack? My motorcycle wants a pack for it's rear rack :). Ideally a spreadsheet. The 8x8 is pretty straight forward 32" (zipper compensates for the seam. but the 12" width throws me.
@@Maddonkeys I just made 4 of the little dry bags with Dyneema. I didn't change the needle from whatever I had on there from my previous project. I think it was an 80/12 or could've been a 90/12. It's super easy to sew through. Didn't change any settings, either, just used a std 2.5mm stitch lenght, except for when I did the topstitching, where I changed it to 3.0mm.
I'm curious as to why you wouldn't use a 'Box X' stitch instead of manually creating that pattern. A 'Box X' allows for one continuous stitch instead of all the stop and starts.
DCF® has a relatively low melting point so we do not recommend that you hold it close to a heat source. We carry a 1" DCF® repair tape and that is the best stuff for sure! ripstopbytheroll.com/products/1-cuben-fiber-repair-tape
On sewing the reinforcement in you say not to go off the webbing. you sew the top and bottom ok fine. Then jump to to doing the buckles. The roll hem on the plain side is magically stitched tip and bottom . I'm guessing you stitch this separately to the reinforcement???? With lock stitches both ends as close to the webbing as possible
I was also frustrated by that omission, but with a background in sewing clothing, I think I know what he did/meant here. You shouldn’t let your stitching slip off the rolled hem into the body of the bag at this point. This would create extra holes in the bag and also leave a gap in your hem. You should sew each line of stitching across the top hem in a complete circle, lock stitching as you start and again in the same spot as you finish the circle. First you do the bottom edge as he shows you, which keeps the hem in place, then press it all nice and flat with your finger and do the line at the very top edge to keep it flat. The holes created by stitching the top seams will be rolled over a few times, protected by the lower portion of the bag, so that should keep any water out. Hope that makes sense. Also, I’m just noticing your comment is from a year ago...lol
about a year late, but. I use COATS outdoor thread. It is nice and thick and easy to find at a Joann Fabrics. They have a few color choices too. I'm placing an order for the Gutermann MARA 70 thread or 50 thread, and is always good when you can order from RBTR and get it in time. But, so far the Coats has been great for my hammocks and bags. Hope this helps!
Dyneema Composite Fabrics would be a good call for this type of application. However, I would recommend something a bit heavier like 2.92 or 5.0 oz for the abrasion resistance that they offer. You will also need to use a more inherently durable and waterproof seam like a flat-felled seam.
@@RipstopbytheRoll , This year I'm planning to ride through the Eastern States to get the state lines... Here is a link to some past trips and I also did a video about my goal to ride through all of the lower 48 states plus Alaska. ruclips.net/channel/UCh9lnTa_QKkaVe4RXgeu7rw
Hi Marc! We've been using the polypro webbing with this kit for some time now. It should be plenty stiff, but if you're having any trouble, don't hesitate to reach out to us sales@ripstopbytheroll.com. We're happy to help.
Although I really appreciate your question, those of us that check RUclips comments don't really have that info. If we did, then we wouldn't be tracking RUclips comments. What types of things are you making these days?
@@RipstopbytheRoll Thanks for your response! Apologies for my question as I genuinely was just curious how much that fabric costed. I am unsure as to what you meant by tracking RUclips comments? I was looking to create a bag with the Dyneema fabric.
@@majorkusanagi3528 Unfortunately, we don't ship directly to you right now. You may be able to find a mail forwarding service. I will also look through our help articles to see if anything is would be of assistance.
As someone who sews clothes. This is a really good tutorial. Very good instruction and great job breaking down steps. Thanks
Thanks Deborah! We are planning to get more of these videos up in the future.
Great tutorial, I'm making 2 waterproof pannier bags for my Son's bike. Every bit of information and knowledge is appreciated. Thank you.
All of this series are fantastic tutorials, I for one really appreciate you taking the time to show us how to use the kits and teaching us new techniques. Thanks!
Great project. Some people may or may not know-- if you lay down a seam like you did at around 2:09, if you set your machine to throw a little bit of a longer stitch, it won't pucker the material so much. Thanks for posting this one. I must try it.
Thanks, very well explained.
I just put two medium bags together this weekend. Really fun project! I would lone to see you come out with a large bag kit. The medium didn’t quite fit my EE quilt. It will fit my down jacket and spare clothes though!
Made this without th kit and it turned out pretty good. Little rough round the edges but just getting into sewing and getting used to the machine.
Great detailed commentary.
Alright RBTR with covid keeping a lot of us home you should expand your MYOG videos and give us more projects! Like the hip belt pouch kit or the flat zippered pouch kit, or even masks!
fold that bottom seam up before laying the tape , other wise it will be very weak. Folding it creates a flat felled seam.
Thanks! Love the website!
Huge thanks!
Muchas gracias
Good stuff!
Great product!
Great peeps!!
Awesome video
Nice!
DUDE, Love your stuff! Between you and Dutchware I've made so much gear.
From your fantastic fabrics I've made a tarp for my hammock (1.1 oz Silpoly 2nd Gen - Coyote Brown) and a 11' hammock (1.6 oz HyperD XL - Dark Brown)
Tiedowns for my Kayaks (1" Polyester webbing 3000 lb), tent exit mats, and now a couple zip pouches from some extra material ( bases on your ZPP Kit).
One thing I would like to know is what size material makes what size bag? My first ones will be bases on your 14"x14" size piece. What size material would I need (and zipper length) for a 12"w x 8"D X 8" high pack? My motorcycle wants a pack for it's rear rack :). Ideally a spreadsheet.
The 8x8 is pretty straight forward 32" (zipper compensates for the seam. but the 12" width throws me.
I just got my kit in the mail, had a couple questions: What needle size do your recommend? And is there a type of thread that you'd suggest using?
Did you ever get a response?
@@Maddonkeys Nah, I had to look it up on their site in the FAQ's
@@Maddonkeys I just made 4 of the little dry bags with Dyneema. I didn't change the needle from whatever I had on there from my previous project. I think it was an 80/12 or could've been a 90/12. It's super easy to sew through. Didn't change any settings, either, just used a std 2.5mm stitch lenght, except for when I did the topstitching, where I changed it to 3.0mm.
Hi there, I'm wondering about thread and needle recommendation for this project?
A size 10-12 needle would work fine with Gutermann MARA 70 thread!
Thanks for the tutorial! What is the reference of your sewing machine ?
Hi! We have an article for you :)
ripstopbytheroll.zendesk.com/hc/en-us/articles/360022325951-What-sewing-machine-do-you-use-
@@RipstopbytheRoll Thanks
I'm curious as to why you wouldn't use a 'Box X' stitch instead of manually creating that pattern. A 'Box X' allows for one continuous stitch instead of all the stop and starts.
The tutorial was for a beginner. Single steps are easier.
What kind of sealing tape is it ?
Is it not good idea to use an iron to seal for DCF ?
DCF® has a relatively low melting point so we do not recommend that you hold it close to a heat source. We carry a 1" DCF® repair tape and that is the best stuff for sure! ripstopbytheroll.com/products/1-cuben-fiber-repair-tape
On sewing the reinforcement in you say not to go off the webbing. you sew the top and bottom ok fine. Then jump to to doing the buckles. The roll hem on the plain side is magically stitched tip and bottom . I'm guessing you stitch this separately to the reinforcement???? With lock stitches both ends as close to the webbing as possible
I was also frustrated by that omission, but with a background in sewing clothing, I think I know what he did/meant here. You shouldn’t let your stitching slip off the rolled hem into the body of the bag at this point. This would create extra holes in the bag and also leave a gap in your hem. You should sew each line of stitching across the top hem in a complete circle, lock stitching as you start and again in the same spot as you finish the circle. First you do the bottom edge as he shows you, which keeps the hem in place, then press it all nice and flat with your finger and do the line at the very top edge to keep it flat. The holes created by stitching the top seams will be rolled over a few times, protected by the lower portion of the bag, so that should keep any water out. Hope that makes sense. Also, I’m just noticing your comment is from a year ago...lol
You made it look very easy, maybe you need to video me for a how not to video 😂
What kind of thread and needle do you recommend using?
We use Gütterman 100% polyester thread (pick fun colors to spruce up your bag!) and a #11 needle on our Singer machine :)
about a year late, but. I use COATS outdoor thread. It is nice and thick and easy to find at a Joann Fabrics. They have a few color choices too. I'm placing an order for the Gutermann MARA 70 thread or 50 thread, and is always good when you can order from RBTR and get it in time. But, so far the Coats has been great for my hammocks and bags. Hope this helps!
Any chance you'll bring this kit back?
They have it on their website now.
I am looking to make a bag that can hold water and be strong to drops or slams. would this work?
Dyneema Composite Fabrics would be a good call for this type of application. However, I would recommend something a bit heavier like 2.92 or 5.0 oz for the abrasion resistance that they offer. You will also need to use a more inherently durable and waterproof seam like a flat-felled seam.
sick song
What kind of sewing machine are you using in the video?
What sewing machine were you using?
That's our Highlead industrial machine.
Is the seam 1/4" ?
Yes it is! Are you diving in to the roll top dry bag today?
@@RipstopbytheRoll , no I just placed a order with you guys and waiting for my order to arrive.
I'm looking to start making some customer dry bags, stuff sacks and other items for my motorcycle camping trips.
@@roebucksadventure Sounds awesome. Where are you riding?
@@RipstopbytheRoll , This year I'm planning to ride through the Eastern States to get the state lines... Here is a link to some past trips and I also did a video about my goal to ride through all of the lower 48 states plus Alaska. ruclips.net/channel/UCh9lnTa_QKkaVe4RXgeu7rw
I'm curious what sewing machine that is?
Hello! This machine is a Highlead GC0518-A-D.
@@RipstopbytheRoll Thank you!
The webbing isn't stiff enough... what else can I use?
Hi Marc! We've been using the polypro webbing with this kit for some time now. It should be plenty stiff, but if you're having any trouble, don't hesitate to reach out to us sales@ripstopbytheroll.com. We're happy to help.
How much did that size of dyneema fabric cost you to buy?
Although I really appreciate your question, those of us that check RUclips comments don't really have that info. If we did, then we wouldn't be tracking RUclips comments.
What types of things are you making these days?
@@RipstopbytheRoll Thanks for your response! Apologies for my question as I genuinely was just curious how much that fabric costed. I am unsure as to what you meant by tracking RUclips comments?
I was looking to create a bag with the Dyneema fabric.
@@teeee4693 No problem at all! What type of bag are you looking at making? Maybe we can help you nail down a fabric.
Hello. Can I buy material from you?
Hi! We ship to many countries but I'm not sure if we ship to yours specifically. Where are you from?
@@RipstopbytheRoll The Russian Federation
@@majorkusanagi3528 Unfortunately, we don't ship directly to you right now. You may be able to find a mail forwarding service. I will also look through our help articles to see if anything is would be of assistance.
@@majorkusanagi3528 Here is a mail forwarding service that may help you!
www.reship.com
@@RipstopbytheRoll Thanks a lot.
These come in a kit?
They sure do! Here's the link if you're interested. ripstopbytheroll.com/products/omnicolor-solids-roll-top-dry-bag-kit-with-dyneema-composite-fabric